w00t...I hardwired the ML!
Thread Starter
MBWorld Fanatic!
Joined: Apr 2003
Posts: 4,781
Likes: 3
From: Boston
'05 A4 1.8TQM6
w00t...I hardwired the ML!
just finished hardwiring our ML with the 8500. Pretty simple job, after you get the plastic trim off carefully :p
works awsome...though, the black dots up top don't seem to do well with suction cups??? It keeps falling off the minute I throw the radar detector up on the clip. I'm going to get some of that PDA screen protector vinyl and put it over the black dots then place the suction cups on the vinyl as that will stick for sure...unless anyone has some suggestion? I tried cleaning off the surface, cleaning the suction cups, etc. Nothing worked.
Also, if anyone wants directions on how to hardwire their ML, i'll be glad to do a write up
next up, the w220 to be hardwired, that one may be a challenge
works awsome...though, the black dots up top don't seem to do well with suction cups??? It keeps falling off the minute I throw the radar detector up on the clip. I'm going to get some of that PDA screen protector vinyl and put it over the black dots then place the suction cups on the vinyl as that will stick for sure...unless anyone has some suggestion? I tried cleaning off the surface, cleaning the suction cups, etc. Nothing worked.
Also, if anyone wants directions on how to hardwire their ML, i'll be glad to do a write up
next up, the w220 to be hardwired, that one may be a challenge
Thread Starter
MBWorld Fanatic!
Joined: Apr 2003
Posts: 4,781
Likes: 3
From: Boston
'05 A4 1.8TQM6
Originally posted by ahopeter
Gdawg...did my directions help at all? and you can just "carve" out the black dots...they are only a sunvisor.
Gdawg...did my directions help at all? and you can just "carve" out the black dots...they are only a sunvisor.
Pretty easy job, except for the stupid plastic cutting me up :p
Thread Starter
MBWorld Fanatic!
Joined: Apr 2003
Posts: 4,781
Likes: 3
From: Boston
'05 A4 1.8TQM6
Originally posted by ahopeter
12v in pasenger footwell IS constant...somethings wrong if not...every ml ive owned it is constant.
12v in pasenger footwell IS constant...somethings wrong if not...every ml ive owned it is constant.
MBWorld Fanatic!
Joined: Jun 2003
Posts: 4,705
Likes: 2
From: nj
a car that can't do the throttle reset.
Originally posted by GDawgC220
hmm...it wasn't when i tapped into it. as well as when i plugged something into it, it wouldn't power the item unless i turned the key into one of the on positions...
hmm...it wasn't when i tapped into it. as well as when i plugged something into it, it wouldn't power the item unless i turned the key into one of the on positions...
