2003 ML350 Cranks but Wont Turn Over in the Heat
#26
power steering
I found a loose hose and pushed it in and now I haven't had the codes come up anymore. I heard a leak when looking under the hood for something else and just started pushing hoses and it made the hissing noise go away. Now all the codes are not popping back up.
I have power steering issues now though so I am going to make a new thread.
I have power steering issues now though so I am going to make a new thread.
#27
Battery reading
Welcome Will.
1) How do you know the battery is good? What's the magic V you read at the battery terminals? Anything less that 12.3V is dead, imo.
btw, if you have been jumping the battery, what does that tell you?
2) FP - Check the FP at the rail - Lots of DIY info "how to" here on the forum you can read up on, or google it.
3) It could very well be your CPS that needs to be replaced.
4) You took it an indie and they came up with nothing? Not even a scan for codes? What about the battery V check? or the FP check? What exactly did they do?
1) How do you know the battery is good? What's the magic V you read at the battery terminals? Anything less that 12.3V is dead, imo.
btw, if you have been jumping the battery, what does that tell you?
2) FP - Check the FP at the rail - Lots of DIY info "how to" here on the forum you can read up on, or google it.
3) It could very well be your CPS that needs to be replaced.
4) You took it an indie and they came up with nothing? Not even a scan for codes? What about the battery V check? or the FP check? What exactly did they do?
#28
MBWorld Fanatic!
Hello, i also have power steering issue. my power steering is at the level yet makes that noise. should i drain and refill with pentosin CHF 11S? the power steering unit itself is not visibly wet on outside with oil, been told that is a tell for power steering unit going out. Also read that groments or system goes out when using incorrect viscosity fluid. been driving it with the noise for a while, strong when turning wheel.
Start your own thread on your specific issue.
This thread has nothing to do with the OPs issues.
One topic per thread.