20" ML63 Style Rims
#1
Super Member
Thread Starter
20" ML63 Style Rims
Got the ML63 style rims in (4) 20"x10" These are aftermarket rims and allow me to run a decent size 20" tire with a reasonable amount of sidewall. They are from forum vendor powerwheelspro and ultra reasonably priced.
#2
#4
Super Member
Thread Starter
Like Real reasonable. Look up the vendor.
http://www.powerwheelspro.com/shop/
How much do they weigh? Good question. I'd say less than than oem 21's but I don't have a scale. Ask Vassili at Powerwheelspro.
http://www.powerwheelspro.com/shop/
How much do they weigh? Good question. I'd say less than than oem 21's but I don't have a scale. Ask Vassili at Powerwheelspro.
#6
MBWorld Fanatic!
Join Date: Aug 2008
Location: N.Jersey and New York, stationed in Germany
Posts: 1,291
Likes: 0
Received 1 Like
on
1 Post
W164 ML500,SMART For two,1994 C280(5speed manual) 1999 C230k station wagon
Like Real reasonable. Look up the vendor.
http://www.powerwheelspro.com/shop/
How much do they weigh? Good question. I'd say less than than oem 21's but I don't have a scale. Ask Vassili at Powerwheelspro.
http://www.powerwheelspro.com/shop/
How much do they weigh? Good question. I'd say less than than oem 21's but I don't have a scale. Ask Vassili at Powerwheelspro.
Trending Topics
#8
Super Member
Thread Starter
Hell, try and find another wheel set (4) in a 20x10 in a 50mm offset that fits. Not too damn many especially 10" wide in a 50mm offset so I'm not overly concerned about how much it weighs. Not a lot out there to choose from besides the old dated 5 spoke AMG in a set (4) of 20's.
Ask Vasilli @ powerwheelspro, maybe he knows what they weigh
#9
Super Member
Thread Starter
To each there own. I wanted this style and this size.
#11
Hi guys,
Thanks for posting pics Hary.
To address some of the questions, the weight is comparable to OEM wheels as they come out of the same low pressure casting process.
The OEM size I don't think is as wide as these, 20x10, these are around ~35lbs.
Regarding bolts, the bolt diameter would be the same as OEM 14mm and the thread spacing 1.5mm. The length I think would be good to use with the oem bolts, I will wait for Hary to confirm, in some cases they might be a tad too long. We are getting the 28mm short bolts in 1 or 2 days in and in 10 days we are getting the 40mm so we are confident we will be able to support a request for shorter bolts if needed.
Thanks
They do look amazing, I am excited to see pics on the car.
Thanks for posting pics Hary.
To address some of the questions, the weight is comparable to OEM wheels as they come out of the same low pressure casting process.
The OEM size I don't think is as wide as these, 20x10, these are around ~35lbs.
Regarding bolts, the bolt diameter would be the same as OEM 14mm and the thread spacing 1.5mm. The length I think would be good to use with the oem bolts, I will wait for Hary to confirm, in some cases they might be a tad too long. We are getting the 28mm short bolts in 1 or 2 days in and in 10 days we are getting the 40mm so we are confident we will be able to support a request for shorter bolts if needed.
Thanks
They do look amazing, I am excited to see pics on the car.
#13
Hi B-tsai,
Unfortunately Hary got the last set we had in stock.
We will be getting more in soon though.
Regarding bolts, our wheels typically need shorter bolts. Some shops either grind down the existing bolts or they buy the shorter ones from us.
The applications are so different though it gets confusing. There have been cases that customers needed the shorter bolts from us and some where they could use the stock ones.
That is for the ML/GL. We have a pretty good understanding of the passenger car applications, the stock ones work 100% except CLKs and older C classes.
Thanks
Unfortunately Hary got the last set we had in stock.
We will be getting more in soon though.
Regarding bolts, our wheels typically need shorter bolts. Some shops either grind down the existing bolts or they buy the shorter ones from us.
The applications are so different though it gets confusing. There have been cases that customers needed the shorter bolts from us and some where they could use the stock ones.
That is for the ML/GL. We have a pretty good understanding of the passenger car applications, the stock ones work 100% except CLKs and older C classes.
Thanks
#14
Super Member
Thread Starter
Thanks Vasilli. I ordered the bolts Monday from Deborah and will put the whole package together when everything is here.
I do alot for others and have been told I'll have a professional grade video put together when I get everything.
I'm really looking forward to a new set of wheels and tires.
I do alot for others and have been told I'll have a professional grade video put together when I get everything.
I'm really looking forward to a new set of wheels and tires.
Last edited by Hary Gahtoe; 05-16-2012 at 11:04 PM. Reason: Sorry, I mispelt Deborah's name :(
#20
do you have any photos of them mounted on the car?