M-Class (W164) Produced 2006-2011: ML280CDI, ML320CDI, ML420CDI, ML350, ML500, ML550

Ml320 Front jacking point

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-02-2020 | 02:22 PM
  #1  
TylerrDurden's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 3
Likes: 0
Ml320 w164
Question Ml320 Front jacking point

Hi, I’m looking to Jack my w164 up at the front and put it on jack stands while I work on the brakes/rotors etc, is this strut a suitable jacking point?



Is this a suitable jacking point?
Old 09-03-2020 | 02:27 AM
  #2  
Maj. Dundee's Avatar
MBWorld Fanatic!
 
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
Here they are.
Attached Files
File Type: pdf
Jacking Points.PDF (98.3 KB, 434 views)
Old 09-03-2020 | 08:59 AM
  #3  
TylerrDurden's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 3
Likes: 0
Ml320 w164
Thanks for your response Maj, I was hoping to put the jack stands at the jacking points, - is there a pdf showing where a trolley jack can be used to lift the front of the car allowing me to place the jack stands?

Originally Posted by Maj. Dundee
Here they are.
Old 09-03-2020 | 09:43 AM
  #4  
Maj. Dundee's Avatar
MBWorld Fanatic!
 
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
Originally Posted by TylerrDurden
Thanks for your response Maj, I was hoping to put the jack stands at the jacking points, - is there a pdf showing where a trolley jack can be used to lift the front of the car allowing me to place the jack stands?
You use the trolley jack at the jacking points and then place a jack stand under the lower control arm.

Last edited by Maj. Dundee; 09-03-2020 at 09:46 AM.
Old 09-03-2020 | 06:31 PM
  #5  
TylerrDurden's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 3
Likes: 0
Ml320 w164
Excellent, thanks, I’ll give that a try. 👍


Originally Posted by Maj. Dundee
You use the trolley jack at the jacking points and then place a jack stand under the lower control arm.
Old 09-03-2020 | 07:26 PM
  #6  
chassis's Avatar
Out Of Control!!
MBWorld Ambassador
 
Joined: Sep 2018
Posts: 13,559
Likes: 4,043
From: unbegrenzt
2017 GLE350 4MATIC
Isn't the front jacking point on the the rounded rectangular shape, pierced with a hole, forward of the red circle in the original post?
Old 09-07-2020 | 12:33 PM
  #7  
lkchris's Avatar
MBWorld Fanatic!
 
Joined: Sep 2005
Posts: 6,081
Likes: 211
From: Albuquerque
'07 GL320CDI, '10 CL550
Mercedes are simply not designed for driveway maintenance using jack stands. Hence, there is no front jacking point.

There are some inexpensive 4-point jacks available, some even listed by Home Depot.
The following users liked this post:
chassis (09-07-2020)
Old 09-07-2020 | 12:48 PM
  #8  
chassis's Avatar
Out Of Control!!
MBWorld Ambassador
 
Joined: Sep 2018
Posts: 13,559
Likes: 4,043
From: unbegrenzt
2017 GLE350 4MATIC
Originally Posted by lkchris
Mercedes are simply not designed for driveway maintenance using jack stands. Hence, there is no front jacking point.

There are some inexpensive 4-point jacks available, some even listed by Home Depot.
@lkchris Are you sure about this? Is your comment directed toward the W164, other models, or all M-B models?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Ml320 Front jacking point



All times are GMT -4. The time now is 11:25 AM.