ABS active on its own
05-19-2024, 12:47 PM
#1
Newbie
Thread Starter
ABS active on its own
My ML w164 has developed a fault with the following codes, 5132, 5136, 7270. This happened quite suddenly and it appeared as though the ABS was activating on 1 rear wheel. I disconnected the rear Sam unit o/s/R which allowed me to drive home. The Sam u it has been apparently b4 but it all looks good inside no water staining or corrosion on the plugs. Just a wheel sensor????
05-20-2024, 04:03 AM
#3
I had a grinding noise on one of my front wheels at low speed (ABS sound) and EPS started to brake on its own. Together with the ABS, EPS etc warnings on the screen. Changed wheel speed sensors and all is well
05-21-2024, 02:54 AM
#4
Newbie
Thread Starter
My ML w164 has developed a fault with the following codes, 5132, 5136, 7270. This happened quite suddenly and it appeared as though the ABS was activating on 1 rear wheel. I disconnected the rear Sam unit o/s/R which allowed me to drive home. The Sam u it has been apparently b4 but it all looks good inside no water staining or corrosion on the plugs. Just a wheel sensor????
The following 2 users liked this post by Smiffy177:
rapidoxidation (05-21-2024),
Vmaxxer (05-21-2024)
