Rear exhaust pipes on ML350
#1
Member
Thread Starter
Rear exhaust pipes on ML350
My 2014 ML350 (petrol) is fully loaded with AMG 'bits' both inside and out, even red AMG brake calipers and badge on the back (from factory) but one thing that spoils this vehicle (and other 350's ) is no rear exhaust pipes (in my opinion). Has anyone retro fitted these? Or taken the pipes out under the rear bumper/fender?
#2
MBWorld Fanatic!
Join Date: May 2017
Location: Montreal/Cape Coral FL
Posts: 1,234
Received 146 Likes
on
130 Posts
2012 X6 35i Sport, 2013 ML 350 BT, 2019 4Runner TRD Pro, 2020 CRV-AWD
I saw an ML350 running the rear valance and exhaust tips from a v8-version. Looked awesome, don't remember if it was on this site or Benzworld. I'm betting he left the stock exhaust as-is and simply swapped the rest for looks only
#3
Super Member
2016 GLE350 have the exposed exhaust, There should be someway to replace the whole rear bumper or just the lower valance which has the cuts outs.
The following users liked this post:
Starfollower (04-06-2018)
#5
Super Member
I'm on roll, if you go to MBoemparts.com you can look up each year and model and parts. I check the rear bumper part for a 2015 (non outlet bumper) with a 2017 bumper with has outlet valance .Is the same part number (166-885-03-25-9999)Since the bumpers are the same then its the bottom valance that must be different. You could just orderer a lower valance from 2017 and the other parts needed to expose the tailpipes. Good luck. Also the price is alot less than the total rear bumper package on ebay.
The following 2 users liked this post by Isawelvis:
john m hempton (07-09-2018),
Starfollower (04-06-2018)
#6
MBWorld Fanatic!
Join Date: May 2017
Location: Montreal/Cape Coral FL
Posts: 1,234
Received 146 Likes
on
130 Posts
2012 X6 35i Sport, 2013 ML 350 BT, 2019 4Runner TRD Pro, 2020 CRV-AWD
I'm on roll, if you go to MBoemparts.com you can look up each year and model and parts. I check the rear bumper part for a 2015 (non outlet bumper) with a 2017 bumper with has outlet valance .Is the same part number (166-885-03-25-9999)Since the bumpers are the same then its the bottom valance that must be different. You could just orderer a lower valance from 2017 and the other parts needed to expose the tailpipes. Good luck. Also the price is alot less than the total rear bumper package on ebay.
#7
Member
Thread Starter
Let me know what you find thanks! Or as there is plenty of room - I might take the pipes under this valence with some rectangular chrome tips.
Trending Topics
#8
MBWorld Fanatic!
Join Date: May 2017
Location: Montreal/Cape Coral FL
Posts: 1,234
Received 146 Likes
on
130 Posts
2012 X6 35i Sport, 2013 ML 350 BT, 2019 4Runner TRD Pro, 2020 CRV-AWD
Which is exactly what I want to do. Leave the stock exhaust tailpipes as-is but replace the valance. Oh, and leave the Bluetec badge on the tailgate just to screw with people's heads LOL
#9
Super Member
I like the exhaust pipes not being exposed, this way if some guy hates you then the less likelihood of someone putting something in the exhaust pipe
#10
MBWorld Fanatic!
Join Date: May 2017
Location: Montreal/Cape Coral FL
Posts: 1,234
Received 146 Likes
on
130 Posts
2012 X6 35i Sport, 2013 ML 350 BT, 2019 4Runner TRD Pro, 2020 CRV-AWD
LOLOL
Issues? You'd have to be someone like diabolis to have to worry about someone sticking a potato in your exhaust tips.
I've read your posts dr. Trust me, you're safe *wink*
Issues? You'd have to be someone like diabolis to have to worry about someone sticking a potato in your exhaust tips.
I've read your posts dr. Trust me, you're safe *wink*
The following users liked this post:
drwolf (04-10-2018)
#11
Super Member
The following users liked this post:
peter2772000 (04-09-2018)