Tune Question: Fans on
Thread Starter
Senior Member
Joined: Sep 2012
Posts: 411
Likes: 23
2011 E550 Coupe, 1992 Corvette ZR-1, 1991 368ci ZR-1, 1990 ZR-1, 1987 Callaway TT, 05 SL600, CLA45
Tune Question: Fans on
So I have a tune from one of the well know tuners on the forum. I noticed when working on the IC pump that the fans did not come on until 200. I forwarded a note to the tuner asking if the fans could be turned on sooner and they replied that it is set for 190.
I confirmed the temp trigger @200 today, and they are telling me I have to have someone verify the engine coding with star.
My question is, can they not check this when I send them my info on the car?
Frustrating that I paid for a tune and now not sure what works and what doesn't
I confirmed the temp trigger @200 today, and they are telling me I have to have someone verify the engine coding with star.
My question is, can they not check this when I send them my info on the car?
Frustrating that I paid for a tune and now not sure what works and what doesn't
MBWorld Fanatic!
Joined: Nov 2010
Posts: 2,605
Likes: 343
From: Welwyn, Herts, UK
2006 S600
Thread Starter
Senior Member
Joined: Sep 2012
Posts: 411
Likes: 23
2011 E550 Coupe, 1992 Corvette ZR-1, 1991 368ci ZR-1, 1990 ZR-1, 1987 Callaway TT, 05 SL600, CLA45
My Mercedes tech couldn't find it either.
So I got some clarity from the tuner, when he told me fans were already set to 190.....apparently he thought that was factory, he did not adjust the fans in the tune.
So I got some clarity from the tuner, when he told me fans were already set to 190.....apparently he thought that was factory, he did not adjust the fans in the tune.
MBWorld Fanatic!
Joined: Nov 2010
Posts: 2,605
Likes: 343
From: Welwyn, Herts, UK
2006 S600
This is the only procedure that I found:
But I don't have an option for Suction Fan on my car.
Nick
Get in to the "control units"
Then go to "ME 2.8"
Then "Drive"
Then "Control Unit adaptations"
Then "Then Correction Programing"
Then "Electric Suction Fan"
Then go to "ME 2.8"
Then "Drive"
Then "Control Unit adaptations"
Then "Then Correction Programing"
Then "Electric Suction Fan"
Nick
Hi Nick !
that is the right procedure
but I've noticed that too, don't have that line in >correction either
the only way to get more fan is to used the AC trick
I uploaded the file here:
https://ufile.io/td6rk
backup link:
http://s000.tinyupload.com/index.php...81567426771696
there must be a solution to make it appear but I am in my ignition nightmare right now
that is the right procedure
but I've noticed that too, don't have that line in >correction either
the only way to get more fan is to used the AC trick
I uploaded the file here:
https://ufile.io/td6rk
backup link:
http://s000.tinyupload.com/index.php...81567426771696
there must be a solution to make it appear but I am in my ignition nightmare right now
