How do i reset the service light?
#1
Thread Starter
Junior Member
Joined: Dec 2002
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
From: Vallejo, Ca
How do i reset the service light?
I was wondering if i could get help on how to reset the service lights on a 98' clk and 98' ml. I saw mbtech208 talk about it in some post but i cant seem to find it anywhere (used search)! on the ML it says -1500 and a wrench symbol next to it!? any help would be greatly appreciated.
#2
Almost a Member!
Joined: Sep 2002
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
From: Eastern NC
'99 ML430
www.4x4abc.com/ml320 I found directions there a couple weeks agao,worked for me.
1)turn ignition to position 1
2)press RESET button twice w/n 2 seconds
3)turn back to position 1
4)PRESS & HOLD the reset button,turn back to position 2
5)keep PRESSING until beep & new miles appear.
1)turn ignition to position 1
2)press RESET button twice w/n 2 seconds
3)turn back to position 1
4)PRESS & HOLD the reset button,turn back to position 2
5)keep PRESSING until beep & new miles appear.
Last edited by dduke; 01-25-2003 at 10:58 AM.
#3
Super Member
Service A or B Lights?
Originally posted by dduke
www.4x4abc.com/ml320 I found directions there a couple weeks agao,worked for me.
1)turn ignition to position 1
2)press RESET button twice w/n 2 seconds
3)turn back to position 1
4)PRESS & HOLD the reset button,turn back to position 2
5)keep PRESSING until beep & new miles appear.
www.4x4abc.com/ml320 I found directions there a couple weeks agao,worked for me.
1)turn ignition to position 1
2)press RESET button twice w/n 2 seconds
3)turn back to position 1
4)PRESS & HOLD the reset button,turn back to position 2
5)keep PRESSING until beep & new miles appear.
Or are you referring to the trip reset of the milege?
Thanks.
#4
Super Member
Please explain.
Originally posted by dduke
www.4x4abc.com/ml320 I found directions there a couple weeks agao,worked for me.
1)turn ignition to position 1
2)press RESET button twice w/n 2 seconds
3)turn back to position 1
4)PRESS & HOLD the reset button,turn back to position 2
5)keep PRESSING until beep & new miles appear.
www.4x4abc.com/ml320 I found directions there a couple weeks agao,worked for me.
1)turn ignition to position 1
2)press RESET button twice w/n 2 seconds
3)turn back to position 1
4)PRESS & HOLD the reset button,turn back to position 2
5)keep PRESSING until beep & new miles appear.
#5
Almost a Member!
Joined: Sep 2002
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
From: Eastern NC
'99 ML430
I guess it should state in #1 ,turn ignition to the 2 position.
Doing it from memory.There is a link you can go to that gives the instructions that I used. worked for me.
Doing it from memory.There is a link you can go to that gives the instructions that I used. worked for me.
Trending Topics
#8
Super Member
Help???
Originally posted by dduke
www.4x4abc.com/ml320 I found directions there a couple weeks agao,worked for me.
1)turn ignition to position 1
2)press RESET button twice w/n 2 seconds
3)turn back to position 1
4)PRESS & HOLD the reset button,turn back to position 2
5)keep PRESSING until beep & new miles appear.
www.4x4abc.com/ml320 I found directions there a couple weeks agao,worked for me.
1)turn ignition to position 1
2)press RESET button twice w/n 2 seconds
3)turn back to position 1
4)PRESS & HOLD the reset button,turn back to position 2
5)keep PRESSING until beep & new miles appear.
Thanks for the info, but the link does not work. I also tried the instructions a few times and also with #1 with the ignition in position two.
Please provide the link and if anyone else can help as well.
Thanks.
This is what I tried also,:
turn ignition key to position 2
press reset button twice within 4 seconds
turn ignition back to pos 1
press and hold the reset button
turn ignition to pos 2
keep pressing the reset button until buzzer sounds and new miles display appears
Last edited by newguy2008; 02-13-2003 at 11:29 PM.
#9
Almost a Member!
Joined: Sep 2002
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
From: Eastern NC
'99 ML430
Sorry about that.......manually type in www.4x4abc.com,in the search area type in fss. that should get you there.
#10
MBWorld Fanatic!
Joined: Jul 2002
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
From: Maryland
1998 C230
How to reset FSS after an oil change
turn ignition key to position 2
press reset button twice within 4 seconds
turn ignition back to pos 1
press and hold the reset button
turn ignition to pos 2
keep pressing the reset button until buzzer sounds and new miles display appears
turn ignition key to position 2
press reset button twice within 4 seconds
turn ignition back to pos 1
press and hold the reset button
turn ignition to pos 2
keep pressing the reset button until buzzer sounds and new miles display appears
#11
Super Member
Completed - Thanks!!!
I found this on the net and it worked.
Turn the electronic key in steering lock to position 2. To call up the trip odometer and main odometer, press button 3 or 4 on the multifunction steering wheel until the display appears.
Press button 5 or 6 until the FSS indicator appears.
Press button 'R' on the instrument cluster for approximately 2 seconds.
The multifunction display will show the question:
'DO YOU WANT TO RESET SERVICE INTERVAL? - CONFIRM BY PRESSING R'
Press button 'R' on the instrument cluster again, and hold until a signal sounds. The message 'SERVICE INTERVAL HAS BEEN RESET' appears in the multifunction display.
The new service indicator is displayed with the reset distance of 10,000 miles (Canada 15,000 km).
Turn the electronic key in steering lock to position 2. To call up the trip odometer and main odometer, press button 3 or 4 on the multifunction steering wheel until the display appears.
Press button 5 or 6 until the FSS indicator appears.
Press button 'R' on the instrument cluster for approximately 2 seconds.
The multifunction display will show the question:
'DO YOU WANT TO RESET SERVICE INTERVAL? - CONFIRM BY PRESSING R'
Press button 'R' on the instrument cluster again, and hold until a signal sounds. The message 'SERVICE INTERVAL HAS BEEN RESET' appears in the multifunction display.
The new service indicator is displayed with the reset distance of 10,000 miles (Canada 15,000 km).
#13
Super Member
One for the customer.
Originally posted by dduke
Yeah......I knew you'd find it.
Yeah......I knew you'd find it.
I can't express how glad I am that the annoying message is "gone". All I have to do now is find a way to get the oil filter cover off so that I can do an oil change myself. I like doing my own oil changes because wherever I go, the technicians always put the drain plug back in when there is still a small flow of oill dripping. I like to pour another litre or 2 to flush the dirty oil out even further. I may be ****.
Anyone know where I can get that tool or what to use to get it off?-clk430
#14
MBWorld Fanatic!
Joined: Jul 2002
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
From: Maryland
1998 C230
I tried that and it didnt reset my FSS light for my 1998 C230.
heres exactly what I did.
put key in and turn to 2.
press 0 button twice. fss comes on displaying -800.
move key to 0.
move key back to 2 while press and hold 0 again.
hold for 10 secs and wait for beep. (no beep)
I let go of 0 and its suppose to reset fss. (no reset)
:/
heres exactly what I did.
put key in and turn to 2.
press 0 button twice. fss comes on displaying -800.
move key to 0.
move key back to 2 while press and hold 0 again.
hold for 10 secs and wait for beep. (no beep)
I let go of 0 and its suppose to reset fss. (no reset)
:/
#16
MBWorld Fanatic!
Joined: Jul 2002
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
From: Maryland
1998 C230
i had the 0 down serveral times past 10 secs, one time it was held for a minute I think.
i cant remember if I had my driver door open or closed, i'll try again right now
i cant remember if I had my driver door open or closed, i'll try again right now