W211/ the seat belt locked after fender bender. help
#1
Super Member
Thread Starter
W211/ the seat belt locked after fender bender. help
how do i un lock seatbelts? or do i have to buy new one? Please advise me
Last edited by dsm2925; 08-07-2009 at 10:02 AM.
#2
MBWorld Fanatic!
The seatbelts are automatically tensioned in an accident using electronics if not pyrotechnics.
New parts are required--be sure insurance adjuster is aware.
New parts are required--be sure insurance adjuster is aware.
#6
Super Member
Thread Starter
#7
Super Member
They do. Typcially after its been diagnosed and/or repaired. Some repairs (SRS, Trans, etc, etc.) won't "take" until such time as the repair is affected and the clodes cleared.
Trending Topics
#9
MBWorld Fanatic!
There is one and only one way to clear a code: fix the problem that created it.
Just get realistic and deal with your insurance company to have accident damage fixed.
Just get realistic and deal with your insurance company to have accident damage fixed.
#10
Super Member
Thread Starter
#11
emergency tensioning of the seat belt is a normal operation of the vehicle, there are two different steps when it happens. one is just pulling the seatbelt tight, the other is a ignition squib fires off causing the seat belt to lock tightly. the only way to fix this is to replace the seatbelt, atleast if the ignition squib went off. take it to a local dealer and ask for a quick test, and or diagnosis. they will recommend replacment of the ingition squibs