need timing chain guide pin info 104 motor asap
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 28
Likes: 0
95 c280
need timing chain guide pin info 104 motor asap
Hi Guys, I'm reassembling the timing chain job that I did not take apart, and although I'm finding enough info to do that, one bit of info is missing for this 95 c280...the chain guide pivot pin that inserts in the head....does this thing go in cone or tapered side in head or flat threaded side in head...can use imput asap, this car could run today with your help! thanks, cliff
Last edited by vettemad; Dec 19, 2009 at 09:15 AM.
MBWorld Fanatic!
Joined: Apr 2007
Posts: 6,171
Likes: 16
300E a couple 1994 w124wagon E320 Wagon/,1971MGB Track/Rally, MG Midget Autocross ,2000 E320 wagon.
Picture on
www.peachparts.com
resource section
diy articles along with procedure in the m104 headgasket write up.
Double check all your work.
Have fun
resource section
diy articles along with procedure in the m104 headgasket write up.
Double check all your work.
Have fun
