Hi Guys, I'm reassembling the timing chain job that I did not take apart, and although I'm finding enough info to do that, one bit of info is missing for this 95 c280...the chain guide pivot pin that inserts in the head....does this thing go in cone or tapered side in head or flat threaded side in head...can use imput asap, this car could run today with your help! thanks, cliff
MBWorld Fanatic!
www.peachparts.com
resource section
diy articles along with procedure in the m104 headgasket write up.
Double check all your work.
Have fun
resource section
diy articles along with procedure in the m104 headgasket write up.
Double check all your work.
Have fun
