300E turbo project (Update new setup)
#26
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Yeah we call it (burning room) here in sweden
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#30
Member
Join Date: Mar 2006
Location: Toronto Canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
1989 Turbo Technics AMG 300CE 3.6
Nice work! What performance target do you have for this new engine? If I recall from another forum your old engine was producing 560hp at the crank and running 0-60 in 4 seconds or less.
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#31
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
#35
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
I stil have getrag 717404 gearbox from 2,3 16v
More bushes
![](http://d4126198.u72.surftown.se/images/vaxelbussningar.JPG)
Oilreturn
![](http://d4126198.u72.surftown.se/images/oljekouk2.JPG)
Fuelrail
![](http://d4126198.u72.surftown.se/images/soppa1.JPG)
Lighted flywheel
![](http://d4126198.u72.surftown.se/images/svanhjul1.JPG)
Sasch racing 2 plates clutch 900Nm
![](http://d4126198.u72.surftown.se/images/koppling02.JPG)
![](http://d4126198.u72.surftown.se/images/paplats03.JPG)
Time to find a better place for engine
![](http://d4126198.u72.surftown.se/images/simonpumpar.JPG)
I stil have getrag 717404 gearbox from 2,3 16v
More bushes
Oilreturn
Fuelrail
Lighted flywheel
Sasch racing 2 plates clutch 900Nm
Time to find a better place for engine
Last edited by PUMPISH; 06-05-2007 at 06:46 PM.
#37
Senior Member
Join Date: Oct 2006
Location: Southcoast England
Posts: 379
Likes: 0
Received 3 Likes
on
3 Posts
CL500 216
Mycket Bra. Can I come and see it the next time that I am in Sverige.
When you see work like this, it reminds me of the fact that so many inventions have come from Sweden.
Malcolm.
When you see work like this, it reminds me of the fact that so many inventions have come from Sweden.
Malcolm.
#38
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
#39
MBWorld Fanatic!
Join Date: Oct 2006
Location: Caribbean/Florida/Colorado
Posts: 3,642
Likes: 0
Received 11 Likes
on
11 Posts
E-ZGO 53hp., 1999 E 430 sport, 2004 E 55, 2008 Tahoe LTZ on 24"s
Fantastic!
And thanks for the start up video, I look forward to your next video after you run in your new engine. I can't wait to see the M103 at 3 bar!!! Again great fabrication work, you make it look so easy, that is the mark of a real pro
BTW I have motor parts the same color as yours.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
BTW I have motor parts the same color as yours.
#41
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
our loggo on the engine too8)
![](http://d4126198.u72.surftown.se/images/motorloggo3.JPG)
![](http://d4126198.u72.surftown.se/images/motorloggo1.JPG)
And some "driving in engine" ride
http://www.youtube.com/watch?v=TlWBn2URurs
And some "driving in engine" ride
http://www.youtube.com/watch?v=TlWBn2URurs
#43
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
wheel instal
![](http://d4126198.u72.surftown.se/images/hjulinstall.JPG)
Some drive in with 0,4bar before I change the oil
http://www.youtube.com/watch?v=OSaX-yErBx4
Thern something happend yestaerday...
http://www.youtube.com/watch?v=fmIouEwP2ZE
Becaurse of plastic the 1´first rod beaing burn....
![](http://d4126198.u72.surftown.se/images/motorutigen.JPG)
![](http://d4126198.u72.surftown.se/images/slidaras1.JPG)
![](http://d4126198.u72.surftown.se/images/slidaras2.JPG)
I fix other engine for this season again...hmm..
I hope I can drive tomorow again but it will be stock engine again
This time a new plastic thing
Some drive in with 0,4bar before I change the oil
http://www.youtube.com/watch?v=OSaX-yErBx4
Thern something happend yestaerday...
http://www.youtube.com/watch?v=fmIouEwP2ZE
Becaurse of plastic the 1´first rod beaing burn....
I fix other engine for this season again...hmm..
I hope I can drive tomorow again but it will be stock engine again
This time a new plastic thing
#45
Super Member
Join Date: Jun 2006
Location: Atlanta, GA and Richmond, VA
Posts: 509
Likes: 0
Received 1 Like
on
1 Post
1991 300E
how much has the intire set up cost? do you currently sell the intake manifold and the exhaust manifold set up or are those specifically custom work? how much would it cost just to do a single, small, basic turbo setup for an m103 motor?
#47
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
I think that the singel basic setup for M103 engine should have 53-60mm inducer turbocharger with pulssplitt twin entry extractor manifold
My friend Daniel building this kind of setup on his 300CE rith now
Like I sad the price is depens how much do you need and it can be everthing between 8000-15000$
We goining to build one 1000Hp setup like mine to some guy with complete engine setup with turbokit:
M103 with CP pistons, pauter rods
Racing 2 plates clutch for 1200Nm
Lighted flywheel
And compklete turbokit with magament system so he just need to put it in his car but this setup cost much more
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#49
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Trying 1bar today and the engine is stil untuned so it goes not very well but stil very nice turbocharger feeling at 1 bar!
http://www.youtube.com/watch?v=Tpwg06Rw-qo
http://www.youtube.com/watch?v=Tpwg06Rw-qo
#50
MBWorld Fanatic!
Join Date: Jun 2005
Location: San Diego Californ-i-a
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
89 300TE, and 68 280sel
Good Lord that 1bar vid sounds soooo sexy!!
I have got to build my TE up like this someday. You should sell the suspension bushings in the w124 forum, I know there are people looking for that stuff.
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
I have got to build my TE up like this someday. You should sell the suspension bushings in the w124 forum, I know there are people looking for that stuff.