300E turbo project (Update new setup)
05-06-2007, 05:29 PM
#1
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
300E turbo project (Update new setup)
New update for a new suput for the next season.
I thing I am done till juli
CP Pistons
GT45 70mm inducer turbocharger
Home made Stainless pulssplitt extractor manifold
3" aliminum home made intake pipes
Home made aluminum intakemanifold
80mm Wilson throttle body
4" thick Intercooler
2 of 38mm wastegates
2 of 32mm BOV
4" stainless downpipe
3,5" home made stainless 2mm thick pipes exhaust with 1 muffler
Megasquirt II v3,0 stanalone magament egine system
EDIS6 ignition
1000cc Delphi lowohm injectors
Builind of intakemainifold
I thing I am done till juli
CP Pistons
GT45 70mm inducer turbocharger
Home made Stainless pulssplitt extractor manifold
3" aliminum home made intake pipes
Home made aluminum intakemanifold
80mm Wilson throttle body
4" thick Intercooler
2 of 38mm wastegates
2 of 32mm BOV
4" stainless downpipe
3,5" home made stainless 2mm thick pipes exhaust with 1 muffler
Megasquirt II v3,0 stanalone magament egine system
EDIS6 ignition
1000cc Delphi lowohm injectors
Builind of intakemainifold
Trending Topics
05-08-2007, 06:42 PM
#8
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
I use 2 wg becaurse I run twin entry collector and puls-splitt and I dont wanna mix pulses from the each side of collector for faster spoleup.
You can even use 1 bigger wg and make 2 pipes all the way from the the collector to wg like my friend did on his 300ce, he splitted them in the flange before the valve
And I run with 2 of BOV becaurse its a 32mm BOVs and they can only make 2-2,3 bar and I probably need more then that. Becaurse GT45 can make up to 900Hp and over 3 bar. So if I run more then 600Hp I need more them 1 32mm BOV
05-08-2007, 06:45 PM
#9
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Today I got to rebuild crx radiator to match stock fitting and pipes for easy instalation.
So it looks a little beat strange but it works
And in the car
So it looks a little beat strange but it works
And in the car
05-09-2007, 06:34 PM
#12
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
05-09-2007, 08:30 PM
#13
MBWorld Fanatic!
Join Date: Apr 2006
Location: Toronto
Posts: 1,332
Likes: 0
Received 4 Likes
on
4 Posts
2006 E320 CDi, 2008 3/4 Ton Suburban, 2007 "rice rickshaw" Accord 5 speed
is your engine emission legal in Sweden?
I have seen some crazy Finnish diesels on You Tube. Are the Swedes equally nuts about modifying their cars?
05-17-2007, 05:31 PM
#16
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Today I made burningroom more round and put down little beat of compression with 2cc more so with my CP pistons and those rooms I get 8,0 compression
05-19-2007, 09:34 PM
#20
MBWorld Fanatic!
Very nice int,exh,and turbo build,however I'm surprised that you would use that as your intercooler. Any reason in particular?
05-19-2007, 09:38 PM
#21
MBWorld Fanatic!
OOops sorry I was looking at the wrng pic
That's a nice intercooler!
That's a nice intercooler!
05-20-2007, 05:35 AM
#23
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
05-20-2007, 11:15 AM
#25
MBWorld Fanatic!
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
Do you guys call a combustion chamber a "burning room"?
I had a friend in highschool who was from England and I loved all the different slang they used.
Very impressed with the custom fab operation. Good Work!!
I had a friend in highschool who was from England and I loved all the different slang they used.
Very impressed with the custom fab operation. Good Work!!
