NY Autoshow tuner event with BENZO
MBWorld Fanatic!
Joined: Feb 2002
Posts: 1,038
Likes: 1
C32 AMG
Adam: I am not sure what you are asking for. There is no such thing as Std Day.
On DYNOJET, data can be displayed in number of different ways:
Actual (Uncorrected) - The actual numbers that are measured. NOT corrected to any factors.
STD - Standard correction.
SAE - corrected to SAE standard. See www.sae.org. We use SAE as it is what OEMs use.
Since we are at sea level, most of the time Actual and SAE are very close. Usually less than 2% diference.
On DYNOJET, data can be displayed in number of different ways:
Actual (Uncorrected) - The actual numbers that are measured. NOT corrected to any factors.
STD - Standard correction.
SAE - corrected to SAE standard. See www.sae.org. We use SAE as it is what OEMs use.
Since we are at sea level, most of the time Actual and SAE are very close. Usually less than 2% diference.
MBWorld Fanatic!
Joined: Nov 2001
Posts: 1,687
Likes: 0
From: Bay Area, CA
Originally posted by HPS (Adam)
Doug,
I don’t blame you for bypassing on Kleemann products due the poor character and professionalism on this board. I’m not saying this because I’m a competitor its fact over 24 other members have said to me via email.
I know the guys from Renntech and they kind, friendly, and serve the customer as we do. Either way both companies will assist you in your decision and provide you with the treatment you deserve!
Doug,
I don’t blame you for bypassing on Kleemann products due the poor character and professionalism on this board. I’m not saying this because I’m a competitor its fact over 24 other members have said to me via email.
I know the guys from Renntech and they kind, friendly, and serve the customer as we do. Either way both companies will assist you in your decision and provide you with the treatment you deserve!
PS. Yes, this time I am badgering you because you just couldn't leave well enough alone. What, are you going to call your lawyers for real this time?
Almost a Member!
Joined: Jan 2003
Posts: 33
Likes: 0
From: Denver
G55
My experience with Kleemann has been nothing but positive. I live in Colorado so I work with the guys in Colorado Springs. Their service and quality is top notch and they seem like a good group of guys. I have no experience with Renntech or HPS so I can't offer my opinion on those companies. If I had another Mercedes that I wanted to modify I wouldn't even think twice about going back to Kleemann. The perfomance increase that they achieved with my vehicle far exceeded my expectations.
Thread Starter
Former Vendor of MBWorld
Joined: Nov 2001
Posts: 930
Likes: 0
Originally posted by HPS (Adam)
Doug,
I don’t blame you for bypassing on Kleemann products due the poor character and professionalism on this board. I’m not saying this because I’m a competitor its fact over 24 other members have said to me via email.
I know the guys from Renntech and they kind, friendly, and serve the customer as we do. Either way both companies will assist you in your decision and provide you with the treatment you deserve!
Doug,
I don’t blame you for bypassing on Kleemann products due the poor character and professionalism on this board. I’m not saying this because I’m a competitor its fact over 24 other members have said to me via email.
I know the guys from Renntech and they kind, friendly, and serve the customer as we do. Either way both companies will assist you in your decision and provide you with the treatment you deserve!
Poor character and professionalism? Your killing me here- are you serious?
At this point if I say ANYTHING that could be even REMOTELY percieved as mean, picking on you, asking atough question etc Ill be crucified by people who have never even dealt with my company. I think you will find that if you ask any of of my customers about their experience with me and my company you will find only positive comments.
Its unfortunate that people will make decisions about mechanical products based on personal statements. Their loss I suppose.
Too bad that you couldnt make it to NYC this weekend-
