R63 Paddleshifters Retrofitted
#1
R63 Paddleshifters Retrofitted
So, I managed to retrofit successfully a pair of C63 paddles to replace the buttons. It took some work - enlarged the hole for the larger paddles and some original button connectors had to be spliced to the new paddles.
But, everything works perfectly and looks bone stock.
Awesome!!
But, everything works perfectly and looks bone stock.
Awesome!!
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
#2
MBWorld Fanatic!
Join Date: Oct 2007
Location: United States
Posts: 1,828
Likes: 0
Received 1 Like
on
1 Post
2008 R350 & 2008 C300
Looks good, any particular reason you didn't just do a whole wheel swap? The C63 flat bottom wheel would have looked great and would do away with the current shift buttons located inside the wheel itself.
#4
Member
Join Date: Jan 2006
Location: Newport Beach, CA, ARIZONA
Posts: 163
Likes: 0
Received 1 Like
on
1 Post
08 clk63 amg black series
do you have instructions on how to remove the steering wheel without going to a dealer? i would love to do the same on my car, but have only removed steering wheels from american cars before. its also impossible to find any info on the internet about diy work on mercedes cars. the car looks sick.
#5
Sorry...had my trusted MB tech do the work.
What I was told:
Steering wheel comes off. Old buttons removed. Opening enlarged. Old button connectors spliced to the C63 paddles. Reinstalled.
About 2 hours/side.
I love the paddles...so much better than the buttons.
What I was told:
Steering wheel comes off. Old buttons removed. Opening enlarged. Old button connectors spliced to the C63 paddles. Reinstalled.
About 2 hours/side.
I love the paddles...so much better than the buttons.
#6
Super Member
Join Date: May 2009
Location: Vancouver British Columbia
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
09 E320 Bluetec
do you have instructions on how to remove the steering wheel without going to a dealer? i would love to do the same on my car, but have only removed steering wheels from american cars before. its also impossible to find any info on the internet about diy work on mercedes cars. the car looks sick.
Trending Topics
#10
MBWorld Fanatic!
Join Date: Mar 2007
Location: Sydney, Australia
Posts: 2,155
Likes: 0
Received 14 Likes
on
11 Posts
Vath ML63 Brabus C63 SL63 CLK63BS C63BS
I am going to try this modification out myself. What sort of tactile feel do you get from the paddleshifters. In my C63 you need to apply a fractional amount of pressure to depress the paddles as the ofer a slight amount of resistance to being pressed which i like. Is it the same in your conversion?
#11
I am going to try this modification out myself. What sort of tactile feel do you get from the paddleshifters. In my C63 you need to apply a fractional amount of pressure to depress the paddles as the ofer a slight amount of resistance to being pressed which i like. Is it the same in your conversion?
Andy
#12
Feeling of paddleshifters
The feeling from your C63 should be the same as this retrofit, because the paddles retrofitted are the exact same paddles as on your C63.
Of note, this is not simple replacement`.
The steering wheel will need to be trimmed to accept the larger C63 paddles. The mounting points are different as well, so new casing may need to be made to fix the paddles in place.
From what I know - the 2007 R63 AND ML63 buttons are exactly the same.
An easier but more expensive option for you would be to buy the new ML63 (2009 onwards) steering wheel with the paddles already in place.
Of note, this is not simple replacement`.
The steering wheel will need to be trimmed to accept the larger C63 paddles. The mounting points are different as well, so new casing may need to be made to fix the paddles in place.
From what I know - the 2007 R63 AND ML63 buttons are exactly the same.
An easier but more expensive option for you would be to buy the new ML63 (2009 onwards) steering wheel with the paddles already in place.
I am going to try this modification out myself. What sort of tactile feel do you get from the paddleshifters. In my C63 you need to apply a fractional amount of pressure to depress the paddles as the ofer a slight amount of resistance to being pressed which i like. Is it the same in your conversion?
#13
So, I managed to retrofit successfully a pair of C63 paddles to replace the buttons. It took some work - enlarged the hole for the larger paddles and some original button connectors had to be spliced to the new paddles.
But, everything works perfectly and looks bone stock.
Awesome!!![drive](https://mbworld.org/forums/images/smilies/driving.gif)
But, everything works perfectly and looks bone stock.
Awesome!!
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Andy
#14
Little black buttons
Small buttons. If you look at my pic of the steering wheel, you will notice a + and - on the steering wheel button.
Immediately behind them are buttons - completely different from the paddles that were installed in 2009 onwards AMG cars.
Basically, with the buttons, I never used them as they were hard to find.
With the paddles, well, it's just natural to use them.
Sorry I did not take a picture before and after.
Immediately behind them are buttons - completely different from the paddles that were installed in 2009 onwards AMG cars.
Basically, with the buttons, I never used them as they were hard to find.
With the paddles, well, it's just natural to use them.
Sorry I did not take a picture before and after.
#15
Small buttons. If you look at my pic of the steering wheel, you will notice a + and - on the steering wheel button.
Immediately behind them are buttons - completely different from the paddles that were installed in 2009 onwards AMG cars.
Basically, with the buttons, I never used them as they were hard to find.
With the paddles, well, it's just natural to use them.
Sorry I did not take a picture before and after.
Immediately behind them are buttons - completely different from the paddles that were installed in 2009 onwards AMG cars.
Basically, with the buttons, I never used them as they were hard to find.
With the paddles, well, it's just natural to use them.
Sorry I did not take a picture before and after.
Andy
#16
R63 decal and steering wheel badge
Added a decal to the back - it sums up pretty much how I feel about the R63.
Added an Affalterbach badge to the steering wheel - completely useless.
And my "other" car...."a dime a dozen nowadays".....lol
Honestly, if someone told me I had to give up either the 997TT or R63, I'd give up the 997TT in a heartbeat hahahaha
Added an Affalterbach badge to the steering wheel - completely useless.
And my "other" car...."a dime a dozen nowadays".....lol
Honestly, if someone told me I had to give up either the 997TT or R63, I'd give up the 997TT in a heartbeat hahahaha
#17
The holes need to be larger so they have to be trimmed.
Connectors have to be spliced - old connectors on to the new paddles.
I am not sure about the paddles...for me, buying the C63 paddles was a shot in the dark, and I was lucky that my MB tech was innovative.
No problems about the questions - I do my best to answer.
CLK63 should work as well.
Connectors have to be spliced - old connectors on to the new paddles.
I am not sure about the paddles...for me, buying the C63 paddles was a shot in the dark, and I was lucky that my MB tech was innovative.
No problems about the questions - I do my best to answer.
CLK63 should work as well.
My car have those buttons too and I guess if those AMG paddles fitted your I think mine will fit too. Do those paddles fit right into the stock one or you have to cut the hole larger to fit the AMG one ? Any solder involve ? Also is it only the C63 paddles will fit ? Can I use the one from CLK63 ? Sorry for too many questions at one.
Andy
Andy
#18
The holes need to be larger so they have to be trimmed.
Connectors have to be spliced - old connectors on to the new paddles.
I am not sure about the paddles...for me, buying the C63 paddles was a shot in the dark, and I was lucky that my MB tech was innovative.
No problems about the questions - I do my best to answer.
CLK63 should work as well.
Connectors have to be spliced - old connectors on to the new paddles.
I am not sure about the paddles...for me, buying the C63 paddles was a shot in the dark, and I was lucky that my MB tech was innovative.
No problems about the questions - I do my best to answer.
CLK63 should work as well.
Andy
#19
MBWorld Fanatic!
Join Date: Mar 2007
Location: Sydney, Australia
Posts: 2,155
Likes: 0
Received 14 Likes
on
11 Posts
Vath ML63 Brabus C63 SL63 CLK63BS C63BS
I have a 2007 ML63 which came with buttons but no paddles, and the 2009 ML63 steering wheel is not compatible with the 2007 model unfortunately
#23
Senior Member
Join Date: Sep 2004
Location: Las Vegas, NV
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz, BMW, Porsche, Aston Martin, Chevrolet
So, I managed to retrofit successfully a pair of C63 paddles to replace the buttons. It took some work - enlarged the hole for the larger paddles and some original button connectors had to be spliced to the new paddles.
But, everything works perfectly and looks bone stock.
Awesome!!![drive](https://mbworld.org/forums/images/smilies/driving.gif)
But, everything works perfectly and looks bone stock.
Awesome!!
![drive](https://mbworld.org/forums/images/smilies/driving.gif)