New member to MBWorld
#1
Almost a Member!
Thread Starter
Join Date: May 2007
Location: Flemington NJ
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
1985 500 SEC
New member to MBWorld
Was looking for a camber kit and found this forum so I joined up. I'm a Benzworld.org extremist. So I'm not exactly new, Just new to this forum.
Hello!
Here is mine. 1985 500SEC
![](http://shadowzone.com/MBpics/PAGTG/friday-2.jpg)
![](http://shadowzone.com/MBpics/PAGTG/friday-3.jpg)
![](http://shadowzone.com/MBpics/PAGTG/friday-4.jpg)
![](http://shadowzone.com/MBpics/PAGTG/friday-5.jpg)
![](http://shadowzone.com/MBpics/PAGTG/friday-6.jpg)
![](http://shadowzone.com/MBpics/PAGTG/group-5.jpg)
Hello!
Here is mine. 1985 500SEC
![](http://shadowzone.com/MBpics/PAGTG/friday-2.jpg)
![](http://shadowzone.com/MBpics/PAGTG/friday-3.jpg)
![](http://shadowzone.com/MBpics/PAGTG/friday-4.jpg)
![](http://shadowzone.com/MBpics/PAGTG/friday-5.jpg)
![](http://shadowzone.com/MBpics/PAGTG/friday-6.jpg)
![](http://shadowzone.com/MBpics/PAGTG/group-5.jpg)
![](http://shadowzone.com/MBpics/thewheel.jpg)
#6
Super Member
Join Date: Aug 2005
Location: Mercerville New Jersey
Posts: 801
Likes: 0
Received 1 Like
on
1 Post
1991 560SEC Teal 1989 420SEL Ice Blue 1984 500SEC White
Hi D O
Welcome!
I see you are a Jersey driver, and they say all the SEC's are on the left coast!
Good Luck
Bruce
BENZITCH
Near Trenton NJ
Welcome!
I see you are a Jersey driver, and they say all the SEC's are on the left coast!
Good Luck
Bruce
BENZITCH
Near Trenton NJ
#7
Almost a Member!
Thread Starter
Join Date: May 2007
Location: Flemington NJ
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
1985 500 SEC
there are 3 here in flemington that I know of. Pretty nice too. A white one, a gold one, and mine. I pulled this one back with me from St. Louis. and then restored it myself.
Trending Topics
#9
Almost a Member!
Thread Starter
Join Date: May 2007
Location: Flemington NJ
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
1985 500 SEC
5-19-07
Added a resonator to the exhaust. It quieted it down a bit and took all the rasp out.
here's a new vid of the exhaust.
TinyPic - Share The Experience!™
new pics
![](http://shadowzone.com/MBpics/finalexhaust-1.jpg)
![](http://shadowzone.com/MBpics/finalexhaust-2.jpg)
![](http://shadowzone.com/MBpics/finalexhaust-3.jpg)
![](http://shadowzone.com/MBpics/finalexhaust-4.jpg)
Added a resonator to the exhaust. It quieted it down a bit and took all the rasp out.
here's a new vid of the exhaust.
TinyPic - Share The Experience!™
new pics
![](http://shadowzone.com/MBpics/finalexhaust-1.jpg)
![](http://shadowzone.com/MBpics/finalexhaust-2.jpg)
![](http://shadowzone.com/MBpics/finalexhaust-3.jpg)
![](http://shadowzone.com/MBpics/finalexhaust-4.jpg)
![](http://shadowzone.com/MBpics/finalexhaust-5.jpg)
#11
Almost a Member!
Thread Starter
Join Date: May 2007
Location: Flemington NJ
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
1985 500 SEC
first coat was a paint made for bar-b-q grills it sticks well and holds up nicely. Very high temp. second and third coats were 1200 degree High temp paint. So far it's holding up well. No burning as far as I can tell and I run this car hard. It of course wouldn't work on a cat. That would be the grill paint which comes only in flat colors. I used only 2 coats of grill paint for the exhaust manifolds because the 1200 degree wouldn't hold up to those kind of temps. When I get my twin turbos later this year, I'm having the manifolds that they are coming with powder coated.
At which point, I will completely redesign the exhaust for mandrel bent stainless full dual exhaust with quad rectangular tips and Flowmaster hushpower II' mufflers. This exhaust was a test to see what I liked.
At which point, I will completely redesign the exhaust for mandrel bent stainless full dual exhaust with quad rectangular tips and Flowmaster hushpower II' mufflers. This exhaust was a test to see what I liked.
Last edited by DarkOne; 05-21-2007 at 11:40 AM.
#12
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
first coat was a paint made for bar-b-q grills it sticks well and holds up nicely. Very high temp. second and third coats were 1200 degree High temp paint. So far it's holding up well. No burning as far as I can tell and I run this car hard. It of course wouldn't work on a cat. That would be the grill paint which comes only in flat colors. I used only 2 coats of grill paint for the exhaust manifolds because the 1200 degree wouldn't hold up to those kind of temps. When I get my twin turbos later this year, I'm having the manifolds that they are coming with powder coated.
At which point, I will completely redesign the exhaust for mandrel bent stainless full dual exhaust with quad rectangular tips and Flowmaster hushpower II' mufflers. This exhaust was a test to see what I liked.
At which point, I will completely redesign the exhaust for mandrel bent stainless full dual exhaust with quad rectangular tips and Flowmaster hushpower II' mufflers. This exhaust was a test to see what I liked.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)