caution with eurotech luxury wheels (ebay)
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Friendswood, TX
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'08 CLS63
caution with eurotech luxury wheels (ebay)
eurotech luxury wheels on ebay. i purchased some wheels from these guys back in march...ever since i've put them on, i've had a vibration problem with the car...i purchased a new set of goodyear f1 tires and took the car back 3 different times to be rebalanced (road balanced everytime). wheels would balance out but the car still had the vibration. about a month ago (with only 10k miles on the goodyears) i bought a set of PS2’s knowing they are the best tires you can buy. well the vibration was still there so i took it to the mercedes dealership...he told me the 600's can go through ball joints and control arm bushing fast because of the weight. so the dealership replaced the ball joints and control arm bushings. the sa called me up and said "your car is ready and by the way, where did you buy your rims?" he said i needed hub rings. i called up the guys at eurotech and they said that's impossible because every wheel they make is 66.6 (mm i presume). they said they would call discount tire and get back with me. after 7 days of not hearing back from them i called them today and a guy named "RUSS" at Eurotech told me the following....
1. it's impossible for the rims not to be 66.6
2. the mereceds dealership are not the experts and he is.
when i asked if i used a mic and the wheels weren't 66.6 what were my options? he yelled at me "IT'S A ****ING COMPUTER". oh yea...and i've been calm the whole time...you usually get further with sugar than you do with spice.
i had amg wheels on my car but they were beat up so i thought i would try these wheels out.
once again the car never had a vibration problem until i changed rims and tires, since then i've changed out just about every part there is. all i wanted was the opportunity to mic the wheel and if they didn't measure out to what he guaranteed they would, what were my options. I have none at this point. this guy was very difficult to deal with, kept talking about how it was impossible for it to be the wheel and had no professionalism.
when buying wheels from eurotech (ebay) i would use a word of caution.
my lesson...you get what you pay for.
btw...chrome double spoke amg wheels for sale, 18x8.5, 18x9.5...both 44 offset.
john
1. it's impossible for the rims not to be 66.6
2. the mereceds dealership are not the experts and he is.
when i asked if i used a mic and the wheels weren't 66.6 what were my options? he yelled at me "IT'S A ****ING COMPUTER". oh yea...and i've been calm the whole time...you usually get further with sugar than you do with spice.
i had amg wheels on my car but they were beat up so i thought i would try these wheels out.
once again the car never had a vibration problem until i changed rims and tires, since then i've changed out just about every part there is. all i wanted was the opportunity to mic the wheel and if they didn't measure out to what he guaranteed they would, what were my options. I have none at this point. this guy was very difficult to deal with, kept talking about how it was impossible for it to be the wheel and had no professionalism.
when buying wheels from eurotech (ebay) i would use a word of caution.
my lesson...you get what you pay for.
btw...chrome double spoke amg wheels for sale, 18x8.5, 18x9.5...both 44 offset.
john
Last edited by housclass; 10-06-2008 at 06:49 PM.
#3
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Friendswood, TX
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'08 CLS63
#4
Banned
Join Date: Jun 2007
Location: Brooklyn
Posts: 2,048
Likes: 0
Received 0 Likes
on
0 Posts
02 S500 Sport
#6
#7
MBWorld Fanatic!
Join Date: Jul 2006
Posts: 1,578
Likes: 0
Received 7 Likes
on
6 Posts
04 S430 (sold),05 X5 4.4i, 02 325i, 87 560SL, 85 Alfa Romeo
IF the bore is not 66.56 you are going to have issues unless you are very lucky. these cars are very sensitive like that and not every wheel is set up like that. Sometimes you can have good success with a wheel with standard bore using a centering ring for corection like Tire Rack sells but that's not always the case. Especially with the oversize wheels. The balance must read 0 all the way across or you are going to fell it even if ever so slightly at higher speeds.
I always have to make sure my balancers don't try to get away with a .20 or .25 blance because I tell them if I fell it I'm bringing it back. And only once!!!
I don't like my seat backs vibrating when I am going down the highway. Thats not luxury.
Trending Topics
#8
Junior Member
Join Date: Jul 2008
Location: Elon, NC
Posts: 37
Likes: 0
Received 1 Like
on
1 Post
Kleemann S55 AMG
Anyone that has dealt with EuroTech Wheels I'm sure by now knows that they are scam artists. Russ (which I presume to be the owner from what I've gathered from them) is an absolute joke to the human race and about the most unprofessional person working for a business that I have EVER come across. I bought a set of wheels from them for my Audi S8 last year and had the SAME VIBRATION PROBLEMS. I would pop my factory wheels back on and voila, my buttery-smooth ride was back ... back to Euro**** wheels and vibration was back that would drive you crazy. I spent hundreds balancing and rebalancing, having the car checked, etc. and there was still a vibration. I called and got transferred to this same joke of a person named "Russ" who proceeded to cuss me out. So, I simply called my credit card company and performed a charge-back (which for those that don't know is a protection afforded by your credit card company for exactly this type of situation). They took the money out of his account, and sure enough, he started (Russ) calling and cussing/threatening me on my voicemail. I had the wheels all boxed up and ready to go back to them but told them plainly that I would not be spending the money out of my pocket to send their defective crap back to them, and UPS labels showed up a couple of weeks later. Even after they had received the wheels back Russ proceeded to call my phone every 30 seconds until I turned it off, and then again left messages cussing me out and threatening me like the 10 year old child that he apparently is. Moral of the story is, for anyone that has been scammed by this idiot, call your credit card company immediately and do a charge-back. If this happens enough they will cancel his ability to accept their card and hopefully put the pathetic crook out of business.
#9
Super Member
Join Date: Aug 2007
Location: Pacific Northwest
Posts: 634
Received 248 Likes
on
166 Posts
2001 S600 V12 Sold, 2011 Jaguar XFR Sold, 2017 S550 4-Matic, 2018 S63 AMG Sedan
I can't believe I didn't see this post sooner. I just ordered some of those wheels through Discount Tire locally. I thought it would be nice to get some really nice wheels for 1/3 the price of the HRE 841r's they look like. I'll keep you guys posted on what happens. And I'll even post pix if I can figure out my wife's new camera.
2001 S600 Sport 245/35-20 on 20 X 8.5's & 285/30-20 on 20 X 9.5 in.
2001 S600 Sport 245/35-20 on 20 X 8.5's & 285/30-20 on 20 X 9.5 in.
#10
Member
I bought wheels from another place like that on Ebay and they were junk. Two bent after hitting small potholes and one the lip split from the rim after hitting a larger pothole. I have hit ton's that were worse than those with the factory wheels and they stayed true. I put factory 9.5" all around so that I could rotate. I had Michelin Pilot Sports 285/35-18's but wanted more sidewall as Pittsburgh's streets are horrible. I went with a Michelin 255-45-18's all around. They fill up the wheel well more than I thought, but the ride is incredibly smooth, potholes, let alone expansion joints, hardly effect the ride either. With the 285/35's you felt everything.
Last edited by 300SDLguy; 03-02-2009 at 03:46 PM.
#11
Super Member
Join Date: Aug 2007
Location: Pacific Northwest
Posts: 634
Received 248 Likes
on
166 Posts
2001 S600 V12 Sold, 2011 Jaguar XFR Sold, 2017 S550 4-Matic, 2018 S63 AMG Sedan
Got my wheels installed today
Wow...Killer!!!
The hard part for me is that I'm 41 years old, and own an advertising agency, so I couldn't go too BLING. I think I made a great choice. The wheels look great, the ride is AAAAMMAAAAZIIIINNNNNNGGGGG!
EUROTECH 20" W/FALKEN 452'S 245/35-20 & 285/30-20. I haven't owned a set of Falken's since 2001 so I was a bit skeptical. I was especially concerned that I would lose ride quality going from the stock AMG 18's to these 20"s would make the ride too firm. I was wrong to be concerned. The rdie is glass smooth, super quiet, very compliant, and even more stable.
After only 8 hours I couldn't be happier. I only hope to still feel this good about this 6 month from now.
I'll post pix this weekend if the weather is nice.
The hard part for me is that I'm 41 years old, and own an advertising agency, so I couldn't go too BLING. I think I made a great choice. The wheels look great, the ride is AAAAMMAAAAZIIIINNNNNNGGGGG!
EUROTECH 20" W/FALKEN 452'S 245/35-20 & 285/30-20. I haven't owned a set of Falken's since 2001 so I was a bit skeptical. I was especially concerned that I would lose ride quality going from the stock AMG 18's to these 20"s would make the ride too firm. I was wrong to be concerned. The rdie is glass smooth, super quiet, very compliant, and even more stable.
After only 8 hours I couldn't be happier. I only hope to still feel this good about this 6 month from now.
I'll post pix this weekend if the weather is nice.
Last edited by carlosinseattle; 03-06-2009 at 10:52 AM.
#12
Senior Member
Join Date: Nov 2003
Location: Seattle,WA
Posts: 314
Likes: 0
Received 1 Like
on
1 Post
744 C36 AMG,040 C43 AMG, CLK55 208, CLS55 IWC, CLK500 Rocketbunny widebody
yall with the vibration problems should check and see if the center bore of your eurotech wheels is really 66.56. If its bigger try a hub ring and it may work
#13
Member
Wow...Killer!!!
The hard part for me is that I'm 41 years old, and own an advertising agency, so I couldn't go too BLING. I think I made a great choice. The wheels look great, the ride is AAAAMMAAAAZIIIINNNNNNGGGGG!
I'll post pix this weekend if the weather is nice.
The hard part for me is that I'm 41 years old, and own an advertising agency, so I couldn't go too BLING. I think I made a great choice. The wheels look great, the ride is AAAAMMAAAAZIIIINNNNNNGGGGG!
I'll post pix this weekend if the weather is nice.
#15
Newbie
Join Date: Feb 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
03 E320, 07 ML 350, 82 280SE
I have set of staggered 19s on my 03 E320. Had the same problems with vibration at first, but I later found that after 3 attempts at balancing the wheels that they are difficult to balance. It wasn't until the 4th time that the shop got it right. Make sure you question the tech who doing the work because the computer they use is not always precise and sometimes give a generic reading. Since then, no vibration. These wheels replaced my Moven wheels which our now no longer available because the company was bought out.
#16
Hunter Balancing
I got a set of 19s from eurotech for my CLK and was told to have them taken to Discount Tire for "Hunter Road force balancing" which I guess is the latest and greatest in wheel dynamics. Those guys got it right the first time. I've heard a lot of bad stories about aftermarket wheels and vibrations but didn't experience any of that. I guess it depends a lot on the shop and how/where they apply the weight and the machine used.
#17
Member
Join Date: Apr 2009
Location: Bay Area, CA
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
2006 C280
(the above post is from a eurotechwheels employee) ![devil](https://mbworld.org/forums/images/smilies/devil.gif)
I wish i read this post earlier, I currently also have wheels/tires from eurotechwheels. I have had to replace 2 faulty toyo tires and reseal a rim which was causing a slow leak. NOBODY PURCHASE FROM EUROTECHWHEELS. this is only to help out fellow mb members and not waste $1700 like I did.
![devil](https://mbworld.org/forums/images/smilies/devil.gif)
I wish i read this post earlier, I currently also have wheels/tires from eurotechwheels. I have had to replace 2 faulty toyo tires and reseal a rim which was causing a slow leak. NOBODY PURCHASE FROM EUROTECHWHEELS. this is only to help out fellow mb members and not waste $1700 like I did.
#18
Member
Join Date: Apr 2009
Location: Bay Area, CA
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
2006 C280
post negative reviews online: http://www.rateitall.com/i-2459504-eurotech-wheels.aspx
at least lets let others know not to buy from these guys
at least lets let others know not to buy from these guys
#19
Member
Join Date: Jun 2008
Location: San Diego
Posts: 215
Likes: 0
Received 6 Likes
on
5 Posts
2012 CLS63 AMG Performace - Obsidian Black
Unfortunately, I have to add to these experiences as well. I purchased their knock-off AMG wheels for my E320 last year, with horrible results. Their shop is right here in San Diego, and I did it locally.
They are complete and total scumbags- while the wheel offset itself was correct, the wheel hub thickness / bolt depth was not, and they installed my original bolts, leading to a nice, card-in-the-spokes, tapatapatapa sound as I drove (bolt head hitting the brake cable). Their suggestion to fix it? Cut the bolts. No kidding. I didn't find out until Discount Tire showed me on during a new tire mounting. Cut 'em 50%, and didn't say anything.
After 6 months, all four rims were bent or hairline cracked, and losing air (I'm a pretty mellow driver in the W210). And all of this was from pretty minor potholes in downtown San Diego, nothing bad.
I put back on the stock rims, and realized how nicely the W210 rides- I had completely forgotten with the poorly balanced rims (and yes, they needed hubcentric rings that they didn't have).
Those rims are cheap for a reason, and basically made in a garage. Tread with caution.![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
Chris
They are complete and total scumbags- while the wheel offset itself was correct, the wheel hub thickness / bolt depth was not, and they installed my original bolts, leading to a nice, card-in-the-spokes, tapatapatapa sound as I drove (bolt head hitting the brake cable). Their suggestion to fix it? Cut the bolts. No kidding. I didn't find out until Discount Tire showed me on during a new tire mounting. Cut 'em 50%, and didn't say anything.
After 6 months, all four rims were bent or hairline cracked, and losing air (I'm a pretty mellow driver in the W210). And all of this was from pretty minor potholes in downtown San Diego, nothing bad.
I put back on the stock rims, and realized how nicely the W210 rides- I had completely forgotten with the poorly balanced rims (and yes, they needed hubcentric rings that they didn't have).
Those rims are cheap for a reason, and basically made in a garage. Tread with caution.
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
Chris
Last edited by socalsounds; 01-03-2010 at 12:17 PM.
#20
Junior Member
Join Date: Jul 2008
Location: Elon, NC
Posts: 37
Likes: 0
Received 1 Like
on
1 Post
Kleemann S55 AMG
Apparently EuroTech Wheels is under new management, as I was contacted by the new owner with a sincere apology and seemingly genuine concern about my past issues with the company. I will definitely be considering them next time I'm in need of another set of wheels. It's amazing how far good management can get a company and vice-versa.
#21
MBWorld Fanatic!
now im afraid...
ive been eyeing Eurotech wheels for a while now, AND have been messaging them back and forth through ebay...
ive been wanting their Brabus Replica in black ...
but i dunno now?
ive been eyeing Eurotech wheels for a while now, AND have been messaging them back and forth through ebay...
ive been wanting their Brabus Replica in black ...
but i dunno now?
#22
Deleted by moderator
Buying off negative feedback is shameful. In your other posgt you only Offered the refund conditioning it on removal of negative comments.
Most of your ebay wheel packages cost about $2000 so $300 is nowhere near 50%
http://motors.shop.ebay.com/eurotech...1&_from=&_ipg=
Also you are not clearly indicating these are CHEAP CHINESE REPLICA WHEELS either here or in your ads. You are trying to make people think they are getting authentic wheels and using the Manufacturers brand name without obtaining their license to sell such a product. This is trademark infringement at its worst.
If your company has changed for the better, that will be reflected in feedback going forward. But just trying to silence past complaints shows you continue to run a shady business.
Look at what Toyota is doing...stepping up and admitting mistakes, not trying to silence complaints.
Last edited by tusabes; 02-09-2010 at 11:35 PM.
#23
Your feedback ranking is now meaningless since you have admitted you pay people off to remove their complaints.
Who wouldnt want $300 back for removing a line of text? Im guessing far more than 90% of people who neg you will happily remove it for such a payment. So your actual number of negs could be 10x higher, but now we will never know the real #.
Also you didnt address the trademark infringement issue, your ads display the manufacturers logos, emblems and imply an official product. In your ads I viewed, you do not mention these are not authentic wheels. There are many attorneys who own Mercedes automobiles (myself included) and I have seen the deadly effects of cheap replica wheels.
For some of us, replicas are fine, but many here will happily pay the premium for authentic. And your ads are still designed to confuse buyers whether they are replicas or authentic.
Who wouldnt want $300 back for removing a line of text? Im guessing far more than 90% of people who neg you will happily remove it for such a payment. So your actual number of negs could be 10x higher, but now we will never know the real #.
Also you didnt address the trademark infringement issue, your ads display the manufacturers logos, emblems and imply an official product. In your ads I viewed, you do not mention these are not authentic wheels. There are many attorneys who own Mercedes automobiles (myself included) and I have seen the deadly effects of cheap replica wheels.
For some of us, replicas are fine, but many here will happily pay the premium for authentic. And your ads are still designed to confuse buyers whether they are replicas or authentic.
#24
MBWorld Fanatic!
Join Date: Jul 2006
Posts: 1,578
Likes: 0
Received 7 Likes
on
6 Posts
04 S430 (sold),05 X5 4.4i, 02 325i, 87 560SL, 85 Alfa Romeo
This is not the place for this back and forth whining from either customer or company.
Please take this to off topic. It's already too old to have been revived in the first place.
Please take this to off topic. It's already too old to have been revived in the first place.
#25
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Friendswood, TX
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'08 CLS63
as a forum member i have $943 of my hard earned money sitting in my garage for wheels that i can't sell, can't use and were on my car for 8 months. i believe forum members would want to know about products from other members before spending their hard earned money.
i also have to say that the new guy is making an effort...unlike russ.
john
i also have to say that the new guy is making an effort...unlike russ.
john