jaydapoet

I moved into a community in which they use electronic gate opener. Apparently the infrared glass is preventing the electronic device (sticker) to transmit a signal. I am looking at the manual for the bypass area but still having problems. I am trying to find the areas in which anyone else have used in order to get electronic devices to work( ezpass for tolls etc) Thanks in advance

CarboyS

There is a designated spot for transponders. It is the black area on the sides of the mirror. It should work if it's mounted there.

srknutson

I had the same problem and was able to get a manual openner for our gate, it still does not have the distance that the other cars have but works.

benzat17

im having the same problem if its possible someone posts a pic to where is the infrared free area to put the sticker on

thank you

Quadcammer

gentlemen, this is why you have owners manuals. It clearly describes, with a picture, the spots that don't have that shielding.

Skylaw

I have used the buttons on my mirror to operate the gates in my community. I used the separate gate opener provided by the community to program the mirror buttons.

benzat17

dont yell i forgot about that loooool ill check it tonight
and thanks for reminding me

jaydapoet

I am trying to put it in the areas based off the maual but it is not working. I also tried to put in the in black areas on the edge. I even looked at other mercedes in the community to see where they have their stickers placed. I will get a flashlight to try and see the areas that the book is recommending. I may have to get the buttons programmed to work the gate opener. Thanks for the help

Arnee

I programmed our community gate remote to the car's homelink buttons. no problems with interference or functionality.