S-Class (W220) 1999-2006: S 320 CDI, S 320, S430, S 500, S 600

M275 V12 WATER PUMP DIY WITH PICTURES

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-23-2020, 02:30 PM
  #26  
Newbie
 
em_bee's Avatar
 
Join Date: Sep 2019
Posts: 13
Received 1 Like on 1 Post
CLA250, S600
how did you refill the coolant?
Old 09-24-2020, 02:48 AM
  #27  
Senior Member
 
turbonos7's Avatar
 
Join Date: Jun 2013
Location: Houston, TX
Posts: 262
Received 32 Likes on 22 Posts
'05 S430, '05 S600
Fill the expansion tank. There are 2 small hoses that will direct coolant to the right areas to start filling the system. Once it is "full" turn the key to position 2 and the electric pump at the bottom of the tank will pump coolant into the engine. Top off the overflow tank and run the engine for a while. continue to top off as air comes out and finds its way to the expansion tank.
The following users liked this post:
em_bee (09-24-2020)
Old 09-24-2020, 01:44 PM
  #28  
Newbie
 
em_bee's Avatar
 
Join Date: Sep 2019
Posts: 13
Received 1 Like on 1 Post
CLA250, S600
that did it. thank you!
Old 12-05-2022, 08:29 AM
  #29  
Super Member
 
tim687's Avatar
 
Join Date: May 2021
Location: Netherlands
Posts: 532
Received 139 Likes on 127 Posts
CL 600 '00 5.8L V12
So how do you put the crankshaft pulley back on the crankshaft with the correct timing?
Is there somekind of slot that the pulley slides into?
Old 01-10-2023, 01:58 AM
  #30  
Super Member
 
tim687's Avatar
 
Join Date: May 2021
Location: Netherlands
Posts: 532
Received 139 Likes on 127 Posts
CL 600 '00 5.8L V12
Originally Posted by tim687
So how do you put the crankshaft pulley back on the crankshaft with the correct timing?
Is there somekind of slot that the pulley slides into?
Yes there is.
Old 01-12-2023, 07:51 AM
  #31  
Super Member
 
tim687's Avatar
 
Join Date: May 2021
Location: Netherlands
Posts: 532
Received 139 Likes on 127 Posts
CL 600 '00 5.8L V12
Originally Posted by turbonos7
Fill the expansion tank. There are 2 small hoses that will direct coolant to the right areas to start filling the system. Once it is "full" turn the key to position 2 and the electric pump at the bottom of the tank will pump coolant into the engine. Top off the overflow tank and run the engine for a while. continue to top off as air comes out and finds its way to the expansion tank.
This only works for cars that have an intercooler. For naturally aspirated engines, just top it up and start the engine

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 1 votes, 5.00 average.

Quick Reply: M275 V12 WATER PUMP DIY WITH PICTURES



All times are GMT -4. The time now is 12:19 PM.