S500 w220 Airmatic problem
Thread Starter
Newbie
Joined: Mar 2021
Posts: 3
Likes: 0
W220 s500
S500 w220 Airmatic problem
Hello guys, i changed the position sensor, the 2 back suspension, valve blocs, i test้s the compresor and the pump, they are good but my car still doesn't want to get up... The rear is on the rims and the front ๎s max up... What should i do ?...
MBWorld Fanatic!
Joined: Jun 2020
Posts: 1,363
Likes: 1,012
'11 E350, '11 E550, '98 M3, '95 E320
Why was all that replaced in the first place? Are you sure everything is hooked up correctly? I'd probably focus on the front, as a control... if the ride height sensor is manipulated, can you get front to lower and raise. If the front responds normally, then it would point to an issue with the rear sensor. Assuming your not hearing the compressor running and the rear is not raising.
Now if the front doesn't respond at all or correctly... then its a matter of figuring out if its a input and/or output issue.
Now if the front doesn't respond at all or correctly... then its a matter of figuring out if its a input and/or output issue.
Thread Starter
Newbie
Joined: Mar 2021
Posts: 3
Likes: 0
W220 s500
MBWorld Fanatic!
Joined: Dec 2012
Posts: 2,474
Likes: 439
From: Ball Ground, GA (N of Atlanta)
2003 S500 2007 GL450
Some photos that might help.
https://www.benzworld.org/threads/re...oblem.2919194/
https://www.benzworld.org/threads/re...-dash.2934786/
https://www.benzworld.org/threads/re...oblem.2919194/
https://www.benzworld.org/threads/re...-dash.2934786/
