JBSPEED/W221 LED License Plate Light $39 Shipped!!
Thread Starter
Joined: Oct 2008
Posts: 27,890
Likes: 55
From: home
Lexus NX200T F-Sport AWD
JBSPEED/W221 LED License Plate Light $39 Shipped!!
PM me, email me (crazymomo1028@gmail.com) or aim me (jbspeed1028) if you are interested. It's the full replacement, not just the light bulb.
If you decide to get one, you can go ahead and send me the payment to crazymomo1028@gmail.com via paypal. If you don't have a paypal account or want to use a credit card, please lemme know. $39 shipped to ALL Places on earth!!
The pics below just to show how the light looks like.
Special Thanks to BAD430BENZ
Special Thanks to obsidian05e55
If you decide to get one, you can go ahead and send me the payment to crazymomo1028@gmail.com via paypal. If you don't have a paypal account or want to use a credit card, please lemme know. $39 shipped to ALL Places on earth!!
The pics below just to show how the light looks like.
Special Thanks to BAD430BENZ
Special Thanks to obsidian05e55
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Joined: Oct 2008
Posts: 27,890
Likes: 55
From: home
Lexus NX200T F-Sport AWD
Member
Joined: Mar 2008
Posts: 193
Likes: 0
From: Naples, FL
S550 4matic, ML350
Didnt get your PM... can you post or email egauster@gmail.com Thanks!
Member
Joined: Mar 2008
Posts: 193
Likes: 0
From: Naples, FL
S550 4matic, ML350
Yes, but these are not just the bulbs, they replace the whole unit (square plastic cube looking module). In an exploretory extra hour I had, I removed the carpet and all trim on the interior. The bulbs are accessable but it seems like the square plastic housings are "sandwiched" in the metal of the trunk and do not come out! 
I put it all back and decided to get the steps before ordering. Anyone who has actually done this replacement please post!!! Looks impossible on the 221...
I put it all back and decided to get the steps before ordering. Anyone who has actually done this replacement please post!!! Looks impossible on the 221...
Thread Starter
Joined: Oct 2008
Posts: 27,890
Likes: 55
From: home
Lexus NX200T F-Sport AWD
thanks
Member
Joined: Mar 2008
Posts: 193
Likes: 0
From: Naples, FL
S550 4matic, ML350
I figured it out from piecing together some internet info and trial and error:
1. Remove trunk lid pannel by removing torx screws on the lip and the two screws holding in the umbrella holder.
2. Carefully remove the hinge shrouds and as you are removing the panel, un plug the trunk release button cable, lighting cables, emergency release cable, etc (depending on model you have) Set trunk lid panel aside.
3. Remove license plate and plate bracket. Set aside. (You have to do this because the black panel has to come out from the outside).
4. Peer inside lip of trunk lid and locate two screws (torx) holding in the trunk release handle. Remove them with small ratchet or similar (not much room in there!!) Those screws hold in the black outer panel as well as the release button, along with some plastic clamps.
5. Locate 3 yellow clamp ends (look like the plastic skinny pyramids) You will see 2 at first, but there is a third on the (left) side opposite side to the lock mechanism. These have to be firmly squeezed and pushed through (without breaking them) to release the black plastic panel holding in the license plate light modules
6. From the outside, coax the black plastic panel out firmly but carefully and the light modules will come free.
7. They can now be replaced with the LED units.
Good Luck!! This is NOT easy but it is doable. Best to pay an installer if you are prone to scrapes and breaking small plastic parts!
1. Remove trunk lid pannel by removing torx screws on the lip and the two screws holding in the umbrella holder.
2. Carefully remove the hinge shrouds and as you are removing the panel, un plug the trunk release button cable, lighting cables, emergency release cable, etc (depending on model you have) Set trunk lid panel aside.
3. Remove license plate and plate bracket. Set aside. (You have to do this because the black panel has to come out from the outside).
4. Peer inside lip of trunk lid and locate two screws (torx) holding in the trunk release handle. Remove them with small ratchet or similar (not much room in there!!) Those screws hold in the black outer panel as well as the release button, along with some plastic clamps.
5. Locate 3 yellow clamp ends (look like the plastic skinny pyramids) You will see 2 at first, but there is a third on the (left) side opposite side to the lock mechanism. These have to be firmly squeezed and pushed through (without breaking them) to release the black plastic panel holding in the license plate light modules
6. From the outside, coax the black plastic panel out firmly but carefully and the light modules will come free.
7. They can now be replaced with the LED units.
Good Luck!! This is NOT easy but it is doable. Best to pay an installer if you are prone to scrapes and breaking small plastic parts!
Junior Member
Joined: Jul 2010
Posts: 49
Likes: 0
From: New Hampshire
'09 S550V4, P3+AMG Sport PKG
I figured it out from piecing together some internet info and trial and error:
1. Remove trunk lid pannel by removing torx screws on the lip and the two screws holding in the umbrella holder.
2. Carefully remove the hinge shrouds and as you are removing the panel, un plug the trunk release button cable, lighting cables, emergency release cable, etc (depending on model you have) Set trunk lid panel aside.
3. Remove license plate and plate bracket. Set aside. (You have to do this because the black panel has to come out from the outside).
4. Peer inside lip of trunk lid and locate two screws (torx) holding in the trunk release handle. Remove them with small ratchet or similar (not much room in there!!) Those screws hold in the black outer panel as well as the release button, along with some plastic clamps.
5. Locate 3 yellow clamp ends (look like the plastic skinny pyramids) You will see 2 at first, but there is a third on the (left) side opposite side to the lock mechanism. These have to be firmly squeezed and pushed through (without breaking them) to release the black plastic panel holding in the license plate light modules
6. From the outside, coax the black plastic panel out firmly but carefully and the light modules will come free.
7. They can now be replaced with the LED units.
Good Luck!! This is NOT easy but it is doable. Best to pay an installer if you are prone to scrapes and breaking small plastic parts!
1. Remove trunk lid pannel by removing torx screws on the lip and the two screws holding in the umbrella holder.
2. Carefully remove the hinge shrouds and as you are removing the panel, un plug the trunk release button cable, lighting cables, emergency release cable, etc (depending on model you have) Set trunk lid panel aside.
3. Remove license plate and plate bracket. Set aside. (You have to do this because the black panel has to come out from the outside).
4. Peer inside lip of trunk lid and locate two screws (torx) holding in the trunk release handle. Remove them with small ratchet or similar (not much room in there!!) Those screws hold in the black outer panel as well as the release button, along with some plastic clamps.
5. Locate 3 yellow clamp ends (look like the plastic skinny pyramids) You will see 2 at first, but there is a third on the (left) side opposite side to the lock mechanism. These have to be firmly squeezed and pushed through (without breaking them) to release the black plastic panel holding in the license plate light modules
6. From the outside, coax the black plastic panel out firmly but carefully and the light modules will come free.
7. They can now be replaced with the LED units.
Good Luck!! This is NOT easy but it is doable. Best to pay an installer if you are prone to scrapes and breaking small plastic parts!
