8 piston AMG brakes on w221
#1
MBWorld Fanatic!
Thread Starter
8 piston AMG brakes on w221
Has anyone successfully upgraded their brakes to the SL55/65 8 piston AMG brakes on a w221 S550? I have tons of clearance with my 20" wheels, just wondering if the bolts and brackets all line up?
Also, if rear conversion works as well any advice would be appreciated.
Also, if rear conversion works as well any advice would be appreciated.
#2
MBWorld Fanatic!
Thread Starter
From what I've been able to find out, the 8 piston setup will NOT work on the w221 because of the offset on the brake rotor. I have heard that the 6 Piston setup will fit without a problem. I'm trying to hunt down Steve "MBenzNL" for those parts!
#4
MBWorld Fanatic!
E55/SL55 amg front rotors and calipers are a direct bolt on.
Rears, i heard euro S600 is a direct bolt on for calipers but i dont know what rotors. unfortunately euro spec needs to be bought over the pond form fleabay or BenzNL
It would be a nice upgrade with 20 inch rims but the cheapest ive seen is 1600 for a used set front e55s. then probably as much for the rears if euro s600 is the only choice.
just too much to spend on a car im hopping to trade in for 63 next year.
Rears, i heard euro S600 is a direct bolt on for calipers but i dont know what rotors. unfortunately euro spec needs to be bought over the pond form fleabay or BenzNL
It would be a nice upgrade with 20 inch rims but the cheapest ive seen is 1600 for a used set front e55s. then probably as much for the rears if euro s600 is the only choice.
just too much to spend on a car im hopping to trade in for 63 next year.
Last edited by malahhaor; 05-15-2013 at 11:01 PM.
#5
MBWorld Fanatic!
Thread Starter
Are you saying that the Euro w220 S600 setup will work... Front and rear?
The S63's have been dropping and are quite affordable, I've thought about it myself. But my next will be an SL =).
The S63's have been dropping and are quite affordable, I've thought about it myself. But my next will be an SL =).
E55/SL55 amg front rotors and calipers are a direct bolt on.
Rears, i heard euro S600 is a direct bolt on for calipers but i dont know what rotors. unfortunately euro spec needs to be bought over the pond form fleabay or BenzNL
It would be a nice upgrade with 20 inch rims but the cheapest ive seen is 1600 for a used set front e55s. then probably as much for the rears if euro s600 is the only choice.
just too much to spend on a car im hopping to trade in for 63 next year.
Rears, i heard euro S600 is a direct bolt on for calipers but i dont know what rotors. unfortunately euro spec needs to be bought over the pond form fleabay or BenzNL
It would be a nice upgrade with 20 inch rims but the cheapest ive seen is 1600 for a used set front e55s. then probably as much for the rears if euro s600 is the only choice.
just too much to spend on a car im hopping to trade in for 63 next year.
Last edited by bensitto; 05-16-2013 at 10:29 AM.
#6
MBWorld Fanatic!
You'll have to check with BenzNL,
Since the fronts can be used form US E55 i did not ask about the fronts at that time,
but for the back its W221 EURO S600 is what he suggested i use.
I'm actually not sure if i'll go for 63 or 600. i just want something with a peppier trans. i hate how this car goes in to granny mode after taking it easy for 10 minutes and when you need to get up on it to switch in to faster lane it does nothing. So either AMG trans or perhaps power of 600 will help me with that.
Since the fronts can be used form US E55 i did not ask about the fronts at that time,
but for the back its W221 EURO S600 is what he suggested i use.
I'm actually not sure if i'll go for 63 or 600. i just want something with a peppier trans. i hate how this car goes in to granny mode after taking it easy for 10 minutes and when you need to get up on it to switch in to faster lane it does nothing. So either AMG trans or perhaps power of 600 will help me with that.
Last edited by malahhaor; 05-16-2013 at 12:29 PM.
#7
MBWorld Fanatic!
Not that it is cheap, but i did a RENNtech brake kit front and rear on a S600, took about 3 hours start to finish, and was perfect fit. The vehicle has 21" rims though
Trending Topics
#8
MBWorld Fanatic!
That would be nice! but yes, thats pricey.
I'd have to do something like that as soon as i get the car. otherwise its hard to justify such investment if you're not keeping car for too long.
I'd have to do something like that as soon as i get the car. otherwise its hard to justify such investment if you're not keeping car for too long.
#11
MBWorld Fanatic!
Thread Starter
Just completed my AMG E55/SL55 brake upgrade. 8 pot front, 4 pot rear.
Everything was bolt on. No other mods were needed on my installation.
S550 (non-4Matic)
Here's what you need, most part from autopartswarehouse
1) 2006 E55/SL55 front and rear calipers, front E55/SL55 rotors, rear SL55 rotors. (E55 rear rotor will not work, it sits too deep.)
2) AKEBONO EURO ULTRA-PREMIUM BRAKE PADS, CERAMIC (AKEUR983 - front set) (AKEUR984 - Rear set)
3) Zimmerman Rear SL55 AMG Rotor (W0133-1822290)
4) BG Brake silencer liquid for pads, silencing paste for edges and rear of pads.
They look awesome, so much better than stocks, and way more stopping power.
Everything was bolt on. No other mods were needed on my installation.
S550 (non-4Matic)
Here's what you need, most part from autopartswarehouse
1) 2006 E55/SL55 front and rear calipers, front E55/SL55 rotors, rear SL55 rotors. (E55 rear rotor will not work, it sits too deep.)
2) AKEBONO EURO ULTRA-PREMIUM BRAKE PADS, CERAMIC (AKEUR983 - front set) (AKEUR984 - Rear set)
3) Zimmerman Rear SL55 AMG Rotor (W0133-1822290)
4) BG Brake silencer liquid for pads, silencing paste for edges and rear of pads.
They look awesome, so much better than stocks, and way more stopping power.
#12
MBWorld Fanatic!
looks awesome!!!! thanks for sharing the info
if its not a secret, how much did it run you? im having hard time finding calipers on that site. it keeps giving generic crap.
I keep going back and forth on it. want to get s600 or 63 next year and dont know if it would be worth it spending couple grand for one year of enjoyment.
if its not a secret, how much did it run you? im having hard time finding calipers on that site. it keeps giving generic crap.
I keep going back and forth on it. want to get s600 or 63 next year and dont know if it would be worth it spending couple grand for one year of enjoyment.
Last edited by malahhaor; 07-01-2013 at 06:27 PM.
#13
MBWorld Fanatic!
Thread Starter
Calipers can be found on Ebay for around 1400-1800.
Front rotors are about 130 each rear rotors are around 90 each. Brake pads are about 130 for front set and 99 for rear set. Labor can vary, if you have a brake line bleeder it's possible to do it yourself. Took us about 1 hour per set to install. Plus about 45 minutes to bleed out the entire system. So about 3 hrs total.
The rotors and brake pads are on autopartswarehouse.
Front rotors are about 130 each rear rotors are around 90 each. Brake pads are about 130 for front set and 99 for rear set. Labor can vary, if you have a brake line bleeder it's possible to do it yourself. Took us about 1 hour per set to install. Plus about 45 minutes to bleed out the entire system. So about 3 hrs total.
The rotors and brake pads are on autopartswarehouse.
looks awesome!!!! thanks for sharing the info
if its not a secret, how much did it run you? im having hard time finding calipers on that site. it keeps giving generic crap.
I keep going back and forth on it. want to get s600 or 63 next year and dont know if it would be worth it spending couple grand for one year of enjoyment.
if its not a secret, how much did it run you? im having hard time finding calipers on that site. it keeps giving generic crap.
I keep going back and forth on it. want to get s600 or 63 next year and dont know if it would be worth it spending couple grand for one year of enjoyment.
#14
MBWorld Fanatic!
Thread Starter
MBenzNL aka Steve Krabbenborg might have the calipers for this car as well. Ebay usually always has a set or two on auction. GL hope this helps other w221 members that are looking to do the brake mod. I could not find clear info when I was searching the forums. everyone said Euro S600 on the rear but the E55 caliper with SL55 rotor on the rear did the trick for me.
Last edited by bensitto; 07-02-2013 at 09:36 AM.
#16
MBWorld Fanatic!
Thread Starter
To paint or not to paint?
What color do you all think goes best with Designo Graphite?
Cobalt Blue, Red, Yellow, AMG Ceramic Copper?
I'm leaning towards blue or yellow... they really pop.
Cobalt Blue, Red, Yellow, AMG Ceramic Copper?
I'm leaning towards blue or yellow... they really pop.
#19
MBWorld Fanatic!
Thread Starter
Silver is great, but they blend in with the rotor and everything else in there. Love it, although just want a little pop under there. I'm leaning towards the RED with white AMG lettering.
The electric/cobalt blue is my second choice just cause not many people have that color and it works well with the Designo Graphite color. pops but doesn't scream out like the others.
I'll probably have this done within the next 2 weeks.
The electric/cobalt blue is my second choice just cause not many people have that color and it works well with the Designo Graphite color. pops but doesn't scream out like the others.
I'll probably have this done within the next 2 weeks.
#21
Member
Just completed my AMG E55/SL55 brake upgrade. 8 pot front, 4 pot rear.
Everything was bolt on. No other mods were needed on my installation.
S550 (non-4Matic)
Here's what you need, most part from autopartswarehouse
1) 2006 E55/SL55 front and rear calipers, front E55/SL55 rotors, rear SL55 rotors. (E55 rear rotor will not work, it sits too deep.)
2) AKEBONO EURO ULTRA-PREMIUM BRAKE PADS, CERAMIC (AKEUR983 - front set) (AKEUR984 - Rear set)
3) Zimmerman Rear SL55 AMG Rotor (W0133-1822290)
4) BG Brake silencer liquid for pads, silencing paste for edges and rear of pads.
They look awesome, so much better than stocks, and way more stopping power.
Everything was bolt on. No other mods were needed on my installation.
S550 (non-4Matic)
Here's what you need, most part from autopartswarehouse
1) 2006 E55/SL55 front and rear calipers, front E55/SL55 rotors, rear SL55 rotors. (E55 rear rotor will not work, it sits too deep.)
2) AKEBONO EURO ULTRA-PREMIUM BRAKE PADS, CERAMIC (AKEUR983 - front set) (AKEUR984 - Rear set)
3) Zimmerman Rear SL55 AMG Rotor (W0133-1822290)
4) BG Brake silencer liquid for pads, silencing paste for edges and rear of pads.
They look awesome, so much better than stocks, and way more stopping power.
#23
MBWorld Fanatic!
Thread Starter
#24
MBWorld Fanatic!
Just completed my AMG E55/SL55 brake upgrade. 8 pot front, 4 pot rear.
Everything was bolt on. No other mods were needed on my installation.
S550 (non-4Matic)
Here's what you need, most part from autopartswarehouse
1) 2006 E55/SL55 front and rear calipers, front E55/SL55 rotors, rear SL55 rotors. (E55 rear rotor will not work, it sits too deep.)
2) AKEBONO EURO ULTRA-PREMIUM BRAKE PADS, CERAMIC (AKEUR983 - front set) (AKEUR984 - Rear set)
3) Zimmerman Rear SL55 AMG Rotor (W0133-1822290)
4) BG Brake silencer liquid for pads, silencing paste for edges and rear of pads.
They look awesome, so much better than stocks, and way more stopping power.
Everything was bolt on. No other mods were needed on my installation.
S550 (non-4Matic)
Here's what you need, most part from autopartswarehouse
1) 2006 E55/SL55 front and rear calipers, front E55/SL55 rotors, rear SL55 rotors. (E55 rear rotor will not work, it sits too deep.)
2) AKEBONO EURO ULTRA-PREMIUM BRAKE PADS, CERAMIC (AKEUR983 - front set) (AKEUR984 - Rear set)
3) Zimmerman Rear SL55 AMG Rotor (W0133-1822290)
4) BG Brake silencer liquid for pads, silencing paste for edges and rear of pads.
They look awesome, so much better than stocks, and way more stopping power.
front: 2003-2006 E55 calipers, rotors and pads.
back: 2003-2006 E55 calipers and pads. SL55 rotors.
Did I get it right?
Any thing else I need to to know? E55 bolts or stock S550 bolts will do?
Thanks.
#25
MBWorld Fanatic!
Thread Starter
Correct. Calipers can be from SL55 or E55, both share the same front rotor but rear rotor needs to be SL55 for non-4matic w221.
Stock (S550) bolts work.
Stock (S550) bolts work.