2007 s550 command module issue - no display
#1
Junior Member
Thread Starter
2007 s550 command module issue - no display
So is this the command module or voice command module or is it one in the same?
Display all of a sudden started flashing the mbz logo like it was trying to boot. As of now I only have AC controls and nothing else on the screen. Tried system reset (eject button) and disconnecting batteries for 15ish minutes, no luck. Dropping it off tomorrow at my Indy shop for repair unless it's an easier plug and play fix. Thanks guys
Display all of a sudden started flashing the mbz logo like it was trying to boot. As of now I only have AC controls and nothing else on the screen. Tried system reset (eject button) and disconnecting batteries for 15ish minutes, no luck. Dropping it off tomorrow at my Indy shop for repair unless it's an easier plug and play fix. Thanks guys
#4
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,435 Likes
on
3,152 Posts
'71 Pinto
Head unit...
#5
Junior Member
Thread Starter
The head unit/display seems fine. I'll get the mbz logo at times and the command safety warning. The ac controls are on there as well just no audio or nav functions
The following users liked this post:
southbayagent (09-24-2019)
#6
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,435 Likes
on
3,152 Posts
'71 Pinto
Need to pull fault codes with MB DAS.
#7
Junior Member
Thread Starter
System needed an update, all is well thank god.
Highly recommend mark @ just German in Tampa if anyone needs a euro service shop that doesn't overcharge or lead you in the wrong direction
Highly recommend mark @ just German in Tampa if anyone needs a euro service shop that doesn't overcharge or lead you in the wrong direction