Renntech tune +100hp
#2
Senior Member
I did what you are doing and HOLY CRAP this becomes astoundingly fast.
If you have xentry make sure to clear out the myriad of codes this brings up due to the changes.
If you have xentry make sure to clear out the myriad of codes this brings up due to the changes.
The following users liked this post:
vinflouen (04-15-2023)
#4
MBWorld Fanatic!
I have not driven a car with Renntech module but I have heard nothing but positive things on it
Happy Driving
Happy Driving
The following users liked this post:
roviw1 (04-15-2023)
#7
Man I want this so bad lol
The following users liked this post:
George A. (04-16-2023)
Trending Topics
The following users liked this post:
danmiles68 (04-16-2023)
#9
MBWorld Fanatic!
Could you explain a little how the tune is done? You mention a 'module', is it like Benz Ninja where you connect an internet-enabled laptop through the ODB port and then upload software ?
The following users liked this post:
danmiles68 (04-16-2023)
#11
Junior Member
Plug module into the ODB port, put ignition in position 2, wait about 30 to 60 seconds for the led to turn green, turn off ignition then remove module and start the vehicle. That's it...same process with module switched back to stock to remove the tune.
#13
Junior Member
Thread Starter
that’s exactly how it went. So simple
The following users liked this post:
Quenthel (04-19-2023)
#15
Senior Member
The following users liked this post:
danmiles68 (04-22-2023)