





Dyno Mode - All you want to know




(-EDIT - added by drexappeal 9/7/07)
1) put key in ignition
2) turn key to position 1
3) toggle menu to overall mileage screen
4) turn key to off position
5) turn key back to position 1
6) press odometer reset button 3 times quickly
7) screen automatically shows battery voltage
8) toggle through pages using steering wheel control until it gets to dynomometer page
9) use +/- buttons to choose ON
10) Turn ignition on and car will be in dyno mode at that point. You will know for sure when the display toggles through ESP/ABS/BAS screens.
*If menu is already set to display overall mileage screen, you can skip steps 4 and 5.
**Overall mileage does NOT have to be set to zero for this to work.
To turn it off dyno mode, you have to go back to the menu screen and de-select ON.




I'm not sure which thread you are talking about, but there are still numerous threads that have instructions on how to use the dyno mode. Do a search for "enable dyno mode".




I have all the Dyno mode instructions with photos in both Word and PDF format. Anyone wanting it let me know.
Trending Topics
Under "how to's" or direct to the pdf
http://members.***.net/buellwinkle/dynomode2003.pdf
The Best of Mercedes & AMG
I did not un-stick it, nor did Revstriker (I presume by his post). I wonder if someone posted to it during the forum downtime last week, and it got lost in the shuffle when a couple day's worth of files were lost.
I sent the 232K PDF file to Buellwinkle to post on his web site for all to download. Check out:http://www.buellwinkle.com/
Under "how to's" or direct to the pdf
http://members.***.net/buellwinkle/dynomode2003.pdf
I ran a search yesterday on getting my car into dyno mode so
that I can check where my oil levels are. I tried, and tried and
tried but couldn't get the car into dyno mode...I searched a little
more today and it seems that 03's and above can't go into dyno
mode.. is this correct?




Maybe they changed it again for the 2004's.
For engine: I get ------------------------------.
If I start the engine while in Dyno mode, I get
Oil Levl 4.4 qts and it slowly goes fown to 3.8qts
the Engine: shows M271 and some other numbers.
Why can't I see the oil level when the engine is off?
Is 4.4 qts too low?
Thanks
CZ






