View Poll Results: How many of you have used Dyno Mode on your Car to Have some Fun (Burn Outs, Fish tai
Yes
56
46.28%
No
65
53.72%
Voters: 121. You may not vote on this poll
Dyno Mode - All you want to know
08-18-2003, 01:07 PM
#1
Administrator
Thread Starter
Dyno Mode - All you want to know
What happened?
(-EDIT - added by drexappeal 9/7/07)
(-EDIT - added by drexappeal 9/7/07)
For 2003+ models, I just found out how to get this working every single time without fail (since I had problems with my battery recently):
1) put key in ignition
2) turn key to position 1
3) toggle menu to overall mileage screen
4) turn key to off position
5) turn key back to position 1
6) press odometer reset button 3 times quickly
7) screen automatically shows battery voltage
8) toggle through pages using steering wheel control until it gets to dynomometer page
9) use +/- buttons to choose ON
10) Turn ignition on and car will be in dyno mode at that point. You will know for sure when the display toggles through ESP/ABS/BAS screens.
*If menu is already set to display overall mileage screen, you can skip steps 4 and 5.
**Overall mileage does NOT have to be set to zero for this to work.
To turn it off dyno mode, you have to go back to the menu screen and de-select ON.
1) put key in ignition
2) turn key to position 1
3) toggle menu to overall mileage screen
4) turn key to off position
5) turn key back to position 1
6) press odometer reset button 3 times quickly
7) screen automatically shows battery voltage
8) toggle through pages using steering wheel control until it gets to dynomometer page
9) use +/- buttons to choose ON
10) Turn ignition on and car will be in dyno mode at that point. You will know for sure when the display toggles through ESP/ABS/BAS screens.
*If menu is already set to display overall mileage screen, you can skip steps 4 and 5.
**Overall mileage does NOT have to be set to zero for this to work.
To turn it off dyno mode, you have to go back to the menu screen and de-select ON.
08-18-2003, 02:07 PM
#2
Out Of Control!!
I'm not sure which thread you are talking about, but there are still numerous threads that have instructions on how to use the dyno mode. Do a search for "enable dyno mode".
08-18-2003, 02:37 PM
#3
Administrator
Thread Starter
Originally posted by revstriker
I'm not sure which thread you are talking about, but there are still numerous threads that have instructions on how to use the dyno mode. Do a search for "enable dyno mode".
I'm not sure which thread you are talking about, but there are still numerous threads that have instructions on how to use the dyno mode. Do a search for "enable dyno mode".
08-20-2003, 06:17 AM
#7
Administrator
Thread Starter
Originally posted by breastroker
I have all the Dyno mode instructions with photos in both Word and PDF format. Anyone wanting it let me know.
I have all the Dyno mode instructions with photos in both Word and PDF format. Anyone wanting it let me know.
Trending Topics
08-26-2003, 10:35 PM
#8
Super Member
Join Date: Apr 2003
Location: Las Vegas
Posts: 792
Likes: 0
Received 1 Like
on
1 Post
2003 C230 K , 2001 ML320
I sent the 232K PDF file to Buellwinkle to post on his web site for all to download. Check out:http://www.buellwinkle.com/
Under "how to's" or direct to the pdf
http://members.***.net/buellwinkle/dynomode2003.pdf
Under "how to's" or direct to the pdf
http://members.***.net/buellwinkle/dynomode2003.pdf
08-27-2003, 12:09 AM
#9
This is a puzzling issue. I did a search and could not find this thread.
I did not un-stick it, nor did Revstriker (I presume by his post). I wonder if someone posted to it during the forum downtime last week, and it got lost in the shuffle when a couple day's worth of files were lost.
I did not un-stick it, nor did Revstriker (I presume by his post). I wonder if someone posted to it during the forum downtime last week, and it got lost in the shuffle when a couple day's worth of files were lost.
01-22-2004, 02:49 PM
#12
Member
Join Date: Nov 2003
Location: Bay Area
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by breastroker
I sent the 232K PDF file to Buellwinkle to post on his web site for all to download. Check out:http://www.buellwinkle.com/
Under "how to's" or direct to the pdf
http://members.***.net/buellwinkle/dynomode2003.pdf
I sent the 232K PDF file to Buellwinkle to post on his web site for all to download. Check out:http://www.buellwinkle.com/
Under "how to's" or direct to the pdf
http://members.***.net/buellwinkle/dynomode2003.pdf
I ran a search yesterday on getting my car into dyno mode so
that I can check where my oil levels are. I tried, and tried and
tried but couldn't get the car into dyno mode...I searched a little
more today and it seems that 03's and above can't go into dyno
mode.. is this correct?
01-22-2004, 06:37 PM
#16
Administrator
Thread Starter
Originally posted by Lynn
Maybe they changed it again for the 2004's.
Maybe they changed it again for the 2004's.
01-27-2004, 01:24 AM
#17
MBWorld Fanatic!
Join Date: May 2003
Location: Houston, TX
Posts: 4,002
Likes: 0
Received 95 Likes
on
52 Posts
2015 E250D
Dyno Mode not working
I did the steps as described and it does not work at all. I get in the car, close door, put key in pos 1, hold reset down forever. Never beeps. Am I doing something wrong?
02-08-2004, 04:19 PM
#19
Senior Member
Join Date: Mar 2003
Location: Stamford, CT
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230
Dyno mode weirdness
I get into dyno mode ok but for Oil Levl. I get -.-
For engine: I get ------------------------------.
If I start the engine while in Dyno mode, I get
Oil Levl 4.4 qts and it slowly goes fown to 3.8qts
the Engine: shows M271 and some other numbers.
Why can't I see the oil level when the engine is off?
Is 4.4 qts too low?
Thanks
CZ
For engine: I get ------------------------------.
If I start the engine while in Dyno mode, I get
Oil Levl 4.4 qts and it slowly goes fown to 3.8qts
the Engine: shows M271 and some other numbers.
Why can't I see the oil level when the engine is off?
Is 4.4 qts too low?
Thanks
CZ
02-23-2004, 10:11 PM
#21
MBWorld Fanatic!
Join Date: May 2003
Location: Houston, TX
Posts: 4,002
Likes: 0
Received 95 Likes
on
52 Posts
2015 E250D
Dyno Mode Help
I have searched the forum for the dyno mode and tried it several times. I put key in IGn, pos 1, hold reset down for several minutes and no luck. I have tired pos 2 even. Door closed and door open also. What gives?
02-24-2004, 06:24 AM
#23
Administrator
Thread Starter
From you description I say you are using the wrong code to access the dyno mode. You are using the MY02 instead of the MY03. In your case you have to press the reset button 3 times in quick succession instead of holding it down while waiting.
