When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys. I tried to install 12mm spacers on the rear on my C63 507 coupe stock 19" wheels. I was having any issue with the hubcentreic pushing the centre cap out and not sitting flush with the wheel.
I was thinking of putting 12mm around. Has anyone else run into this issue? And what do you guys recommend for spacer size for the front and rears.
I havent tried them in the front yet.
Thanks
heres a pic of the spacer I tried.
This is a h&r spacer.
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
It looks like somebody welded something to your spacer. Did you buy used? Because the lip that they come with isn't more than 1/2" high. That's the problem.
It looks like somebody welded something to your spacer. Did you buy used? Because the lip that they come with isn't more than 1/2" high. That's the problem.
Should th top of the spacer be open. This one is closed. I borrowed it from a friend.
Thanks BLKROKT.
Any chance you know the H&R part numbers (or how I would look them up) for the 12mm spacer kit and 40mm bolts that would fit 507 Edition OEM Wheels.
I can't tell this from H&R's site.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
