When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I have a VRP H/E on the car with a bosch 010 pump. I wanted to go the way of killer chiller but not wanting to have to have the AC on and elminate my H/E. So gunna pass on that here in Ut we have all 4 seasons and this is a daily driver ... fall time we avg 55-70 degrees .... winter teens-35 .... spring 55-75 degrees and then summer we have temps in the low to mid 90s on our hot days for a couple monthes. So gunna keep the front mount H/E but am looking for the best one out there. So heres 2 that seem better than most others ... http://www.projectb5.com/product/dtk...heat-exchanger and http://www.projectb5.com/product/pb5...hanger-upgrade. As for cores I did some measurements of VRPs and it looks like without end tanks its 27x6x3 which VRP claims almost 2L which seems pretty good. The DTK one claims 3L and the core for the ProjectB5 is 25x7x3.5 doesnt give a volume but if you plug it into here gives a rough estimate https://www.sensorsone.com/length-wi...me-calculator/ plugging in VRPs you get a volume of 7.9L ( i know its not accurate but gives an idea) plug in Projectb5s and you get 10.03L now I dont know the size of the core in DTKs but thinking bout switching to the Projectb5 front mount. Anyone using one and if so thoughts
So I have a VRP H/E on the car with a bosch 010 pump. I wanted to go the way of killer chiller but not wanting to have to have the AC on and elminate my H/E. So gunna pass on that here in Ut we have all 4 seasons and this is a daily driver ... fall time we avg 55-70 degrees .... winter teens-35 .... spring 55-75 degrees and then summer we have temps in the low to mid 90s on our hot days for a couple monthes. So gunna keep the front mount H/E but am looking for the best one out there. So heres 2 that seem better than most others ... http://www.projectb5.com/product/dtk...heat-exchanger and http://www.projectb5.com/product/pb5...hanger-upgrade. As for cores I did some measurements of VRPs and it looks like without end tanks its 27x6x3 which VRP claims almost 2L which seems pretty good. The DTK one claims 3L and the core for the ProjectB5 is 25x7x3.5 doesnt give a volume but if you plug it into here gives a rough estimate https://www.sensorsone.com/length-wi...me-calculator/ plugging in VRPs you get a volume of 7.9L ( i know its not accurate but gives an idea) plug in Projectb5s and you get 10.03L now I dont know the size of the core in DTKs but thinking bout switching to the Projectb5 front mount. Anyone using one and if so thoughts
The bad news is that that PB5 core is the chinese core sold on frozenboost.com
we tested it, it sucks. not only does it weigh more than the titanic on the bottom of the ocean, it has a TINY fluid capacity, the fins are also very thick which means they have very poor heat transfer. It also pushes your bumper down giving your car a fat lip look. we logged a run before and after that core and we dropped overall temps and recovery time.
Have you checked out our Bay tanks? they may be the best simple solution for you. you already have the beast HE on the market. size isnt everything.
Yeah I am probably going with meth and a bay tank dont need the killer chiller and dont want to put in a trunk mount so these 2 solutions should have it covered
Two ebay coolers for me custom made twin pass. One in stock location with oil cooler removed due to size.Custom cooler behind driver fog light,no more fog light,single pass cooler under supercharger,two pumps,VRP under hood tank. No issues. Would like to try meth though.
Two ebay coolers for me custom made twin pass. One in stock location with oil cooler removed due to size.Custom cooler behind driver fog light,no more fog light,single pass cooler under supercharger,two pumps,VRP under hood tank. No issues. Would like to try meth though.
What are your start / finish IATs with a 3rd-4th pull say in ambiant 75-80 degree heat... This summer is gonna suck bad in the Carolina's. We basically had no winter so I know the 100* dog days are on the way =(
+1 on Meth... I am just injecting mostly distilled water as of now and seeing a huge difference
DO3 on SC snout and DO7 on flat pad under the intercooler that sprays just post intercooler.
I mean if you are taking it off and apart why not just drill and tap two holes right...?
Well right now our temps are at 55-65 so say at 65* a red line 3rd gear pull will be at 80* tops. I hope to do a full 3 and 4th to red line on Sunday to test for my track event day which will be a 60 mph roll than a timed 1/2 mile I just have to finish up my larger fuel line from the tank.....yea....decided to just do it. I do like to reinvent the wheel some times, LOL and everybody runs the stock line but I just do not like it and a larger line will hurt nothing. That's just me though.
A heat exchanger on a e55 Won't lower the iat only help recovery .The intercooler is the weak link without really upgrading that part your chasing a ghost
love chasing ghosts haha all kidding aside Ive been looking for a new intercooler and how to get it done if you have any suggestions Id love to change that part as well not to mention do all the other things such as meth and add the in hood tank
love chasing ghosts haha all kidding aside Ive been looking for a new intercooler and how to get it done if you have any suggestions Id love to change that part as well not to mention do all the other things such as meth and add the in hood tank
run one is Frozen boost HE
run 2 is VRP v2
Run 3 is VRP V2 with the superflo added
run 4 is VRP v2+ secondary HE + superflo
the secondary HE reduces recovery times pretty dramatically, that particular run had an extra big burnout, so our starting temps were quite a bit higher, we will go back out and retest that run-to-run when we test our new IC
but just wanted to show the difference in the V2 and the Frozen boost.
Is the frozen boost the HE that I have?? Can you tell us a lil more bout the new IC?? Also how bout developing a bolt in meth/water kit for the cars and showing that as well??
Is the frozen boost the HE that I have?? Can you tell us a lil more bout the new IC?? Also how bout developing a bolt in meth/water kit for the cars and showing that as well??
We dont sell the frozen boost core, thats what PB5 and FTP are selling.
our core weighs in at about 7lbs, and the frozen boost has to be 20+
All HEs we ship out are either V2s or V3s
We just got our first Single pass IC in for testing today, a bolt in meth kit is tough if you want to spray post blower pre sensor, the only way to do that is to remove the SC and tap the Intercooler, although we have a Throttle body plate that you can add a nozzle to for pre blower.
the single pass units will be available as soon as testing is completed at the end of next week, we have 3 units ready to go.
The other IC project we cant really talk about yet, although I can tell you the design and 1/2 of the manufactured pieces are complete so it should only be a few more weeks til we see a piece we can test
Last edited by VictoryRoadPerformance; 04-25-2017 at 07:17 PM.
We dont sell the frozen boost core, thats what PB5 and FTP are selling.
our core weighs in at about 7lbs, and the frozen boost has to be 20+
All HEs we ship out are either V2s or V3s
We just got our first Single pass IC in for testing today, a bolt in meth kit is tough if you want to spray post blower pre sensor, the only way to do that is to remove the SC and tap the Intercooler, although we have a Throttle body plate that you can add a nozzle to for pre blower.
the single pass units will be available as soon as testing is completed at the end of next week, we have 3 units ready to go.
The other IC project we cant really talk about yet, although I can tell you the design and 1/2 of the manufactured pieces are complete so it should only be a few more weeks til we see a piece we can test
Oh thats good to know that the VRP V2 is already ahead of the game when it comes to just changing the H/E.
I am very interested in the intercooler as I was just talking to Bell bout this