Tire wear
#27
Super Member
I seem to recall the FAQ section talking about this some. I remember seeing Toe numbers for the C63 as being .25-.50 (this is the range allowed to be "in spec" for the alignment) vs. E63/other63 being closer to 0. Other 63s have more rear weight. But as pointed out above, you can get the toe changed to essentially 0, just need to be careful about 0.
The following users liked this post:
D3-AMG (08-17-2017)
#28
#29
MBWorld Fanatic!
This is PFL, so there's an angle in decimal degrees that you then add hexagesimal degrees. My recollection was wrong.
Even so, the total toe looks to be over 6 degrees, not like above. Unless that angle means something else.
Last edited by Vladds; 08-15-2017 at 08:57 PM.
#30
Senior Member
#31