Eurocharged V7 Remote Tuning Session
#1
Super Member
Thread Starter
Eurocharged V7 Remote Tuning Session
What’s up guys here at the Dyno Shop BMR where I usually come for my dynos. We will be doing a remote tuning session with Jerry in just a little bit to see what gains we get from this on pump 91oct. I know a lot of you guys have been waiting for this moment since I had my heads port n polished with nongains and possible loss of power so let’s see what she makes today with a custom tune. I will revisit the dyno on a later date filled with E85 to see what gains we get from that as well.
Dyno History(non Eurocharged tune):
485whp/444wtrq Early 2016
479whp/433wtrq 4/13/2017 after PNP and resonator delete.
Different dates/times/temps etc.. could have varied those above numbers. Today we are solely looking for gains over the canned v7 tune. Though I’d be nice to see ATH numbers.
Performance Mod List to Date:
Eurocharged V7 Tune
Eurocharged Flex Fuel Kit
ammfab Port N Polished Heads
aFe Pro Dry Filters
ROW Boxes
UPD Intake Spacer
UPD Billet Pullies
MBH Headers
MBH HFC
MBH X-Pipe
MBH Resonator Delete
Stay Tuned!!
Dyno History(non Eurocharged tune):
485whp/444wtrq Early 2016
479whp/433wtrq 4/13/2017 after PNP and resonator delete.
Different dates/times/temps etc.. could have varied those above numbers. Today we are solely looking for gains over the canned v7 tune. Though I’d be nice to see ATH numbers.
Performance Mod List to Date:
Eurocharged V7 Tune
Eurocharged Flex Fuel Kit
ammfab Port N Polished Heads
aFe Pro Dry Filters
ROW Boxes
UPD Intake Spacer
UPD Billet Pullies
MBH Headers
MBH HFC
MBH X-Pipe
MBH Resonator Delete
Stay Tuned!!
#2
Senior Member
Just curious, you were able to use afe filters with the magic spacers? For some reason my green filters that came with the kit seemed bigger and my afe's would just fall in.
#4
Super Member
Thread Starter
The V7 tune is great before any adjustments so far. Waiting on Jerry to send a modified file back.
That 486/439 run is legit no spikes.
That 486/439 run is legit no spikes.
Trending Topics
#11
Super Member
Thread Starter
Alright so Jerry and I are satisfied with Dyno Tune 2 from round 2. Made 493whp/444wtrq. I am very satisfied with the numbers which met my expectations. We will be doing another remote tuning session in the future for an E85 map.
#13
expect another 30whp with e85
#15
MBWorld Fanatic!
So am I missing something? You gained 7 whp and 5 wtq over the base v7 map? On the initial dyno run v7 base what was the green run? There seems to be a large gain in the lower rpm with the other runs compared to the green. Was that non eurocharged tune?
Last edited by AMGonFire; 02-21-2018 at 09:07 PM.
#16
MBWorld Fanatic!
What are you surprised about? Custom tunes aren't going to net you huge gains over a canned tune. It's just going to pick up small additional gains for the specific mods that he has. The op has realistic numbers for a full header setup. Not those bs tune only 500 rwhp numbers...
#17
Super Member
Thread Starter
#19
Super Member
Thread Starter
Yes straight pipes in place of the resonator. They go from 3” and taper down to the oem piping size. Which in turn also eliminated highway drone.
#21
MBWorld Fanatic!
#23
Super Member
Thread Starter
#24
MBWorld Fanatic!
Ahhh yes, ok now that you mention it, looking at your dyno plot some of the pulls end at 7k. That would mean the operator let go of the pedal at maybe around 7500rpm or so. The tachs on these cars at high rpm are miles off.....mine shows 8000rpm but logs at ~7400. Go figure.