SL/R129: 300 sl
#1
300 sl
I have a 91 300sl. I had a problem getting the roll Bar to go up so I removed The bolts from the roll bar and the driver side hydrolic came up while the passenger side is still down. Is there anyway to put the hydrolic back down. Thanks
#3
Banned
I would troubleshoot the hydraulics and use them to lower the roll bar back into place.
A logical starting point is the pump located in the trunk under the spare tire and determining whether or not it runs when you operate the roll bar control switch.
A logical starting point is the pump located in the trunk under the spare tire and determining whether or not it runs when you operate the roll bar control switch.