SL/R230: Brake bleeding
Thread Starter
Newbie
Joined: Nov 2016
Posts: 6
Likes: 0
sl500
Brake bleeding
Changed SBC bleed brakes twice. It fails test for air in system. I get this page after it aborts test. Any ideas what’s wrong?
Last edited by slracecar; Jun 21, 2018 at 12:09 AM. Reason: wrong picture
MBWorld Fanatic!
Joined: May 2015
Posts: 4,037
Likes: 1,012
From: Miami, FL
2003 CL 600
You went through the whole procedure in SDS to bleed with proper pressure supplied right?
If so, then you may have a faulty left front pressure sensor as shown by those results, it reads 10 bar which is below spec of 20 bar. Or, you still have air in that branch.
If so, then you may have a faulty left front pressure sensor as shown by those results, it reads 10 bar which is below spec of 20 bar. Or, you still have air in that branch.
