SL55/63/65/R230 AMG: Fire extinguisher/Silver State Classic
thanks
Bob
Last edited by bdean10; Jun 7, 2008 at 01:50 PM.
thanks
Bob
Hey! That's great!
I've not done or seen a fire extinguisher installation on an SL but if you're open for suggestions, I'd suggest a temporary installation (straps, not bolts) on the floor behind the passenger seat.
Good luck!
No t-shirt for you?
I suppose that entry in year 2 might be a no go.
Sorry I can't help on the extinguisher.
Trending Topics
These are the parts used:
MA000 860 33 80 Fire extinguisher (2.220kg)
MA000 866 05 71 Strap
MA000 866 02 14 Bracket
MA129 868 0012 Angle
MA001 994 28 45 Lock (x2)
MA129 990 05 12 Screw (x2)
MA301 990 00 42 Washer (x2)
MN07983 004235 Sheet metal screw (x2)
Here are some pictures
http://www.fototime.com/6319FDBF0747D0C/orig.jpg
http://www.fototime.com/7084F1A3B98CBF2/standard.jpg
hope this helps
Last edited by kevinpuri; Jun 10, 2008 at 04:38 PM.
The Best of Mercedes & AMG
I ran it four times, back in my Ford days in early 90s.
Last time I ran in 1995, lost front tire thread at 160 mph ....... that was fun!
And that was THE last time.
Getting back to your question, on SL, you need to mount it to where it is within your reach. I would recommend on the passenger side next to transmission tunnel.
Certainly sounds as though there is more to be told about that incident.
JDB
I ran it four times, back in my Ford days in early 90s.
Last time I ran in 1995, lost front tire thread at 160 mph ....... that was fun!
And that was THE last time.
Getting back to your question, on SL, you need to mount it to where it is within your reach. I would recommend on the passenger side next to transmission tunnel.
I actually had a blow out in my SL 2 weeks ago - merely annoying though. I had goo not a spare (looking for one those now) and NOBODY (try 37 calls) between Yosemite and the SF bay area has 285/35/18s so it was a 150 mile tow. 3 of us are going to the Nevada run. 1 has an NSX and is mounting his extinguisher as you suggest. The other is considering entering the 110mph deal - then just abandoning his Tshirt.
Bob
These are the parts used:
MA000 860 33 80 Fire extinguisher (2.220kg)
MA000 866 05 71 Strap
MA000 866 02 14 Bracket
MA129 868 0012 Angle
MA001 994 28 45 Lock (x2)
MA129 990 05 12 Screw (x2)
MA301 990 00 42 Washer (x2)
MN07983 004235 Sheet metal screw (x2)
Here are some pictures
http://www.fototime.com/6319FDBF0747D0C/orig.jpg
http://www.fototime.com/7084F1A3B98CBF2/standard.jpg
hope this helps




