SL55/63/65/R230 AMG: RAWAMG build is on!
#126
Super Member
I can't begin to tell everyone how impressed I am with John @ EC... He is advising me on everything good & bad with my car & he really knows his stuff! I went in for my long awaited mods to be installed (correctly) & after I added a few more John decided to give the entire engine & tranny some TLC
New motor mounts, new tranny mount, new front & rear drive line disc, new seals & gaskets everywhere![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Last year I sent Jerry my TCU for tuning & noticed it was full of tranny fluid, John found it... a bad tranny solenoid connector.
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
New motor mounts, new tranny mount, new front & rear drive line disc, new seals & gaskets everywhere
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Last year I sent Jerry my TCU for tuning & noticed it was full of tranny fluid, John found it... a bad tranny solenoid connector.
#127
Super Member
It's all looking good and things are moving fast on your build ........ he's clearly a professional ... you can see how tidy and clean he keeps his workshop ........ I like him already
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#128
Senior Member
Thread Starter
You will have to check the MB part number on the solenoids ...... you can not rely on the color only.
It's all looking good and things are moving fast on your build ........ he's clearly a professional ... you can see how tidy and clean he keeps his workshop ........ I like him already![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
It's all looking good and things are moving fast on your build ........ he's clearly a professional ... you can see how tidy and clean he keeps his workshop ........ I like him already
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
I am very happy with the progress, professionalism, passion, attention to detail thus far from John, he sends me pics & explanations on every little thing that is being done or should be done. I couldn't ask for more from the guy
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![crazy](https://mbworld.org/forums/images/smilies/crazy.gif)
#132
Super Member
When you guy's are at it, then you should change the little rubber sealing for the selector lever ........ it's number 33a ................. and check also if you have a magnet in the oil pan - in some of the first models there were non ....
#133
Senior Member
Thread Starter
Thanks Klaus... I have forwarded this to John... good looking out!
#134
Senior Member
Thread Starter
The engine started to go back together today!
Old heads:
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-old-heads-36552.jpg)
New Heads (ported & polished):
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-new-ported-polisher-heads-36607.jpg)
Old dirty basturd:
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-p1010002-3-36548.jpg)
All cleaned up:
Old heads:
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-old-heads-36552.jpg)
New Heads (ported & polished):
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-new-ported-polisher-heads-36607.jpg)
Old dirty basturd:
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-p1010002-3-36548.jpg)
All cleaned up:
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-block-pistons-all-cleaned-up-36610.jpg)
Last edited by RAWAMG; 05-11-2013 at 10:00 AM.
#135
Senior Member
Thread Starter
The heads are installed, timing set and ready for cams. Will have bolts for cam bearing retainers on Monday. Valve covers on to keep stuff out of engine. New motor mounts installed and first coat of paint on super charger (will have several). Headers mocked. Will see if they can be installed before putting power plant back in car. (May need to be installed after power plant is in the car).
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-headers-mocked-up-36613.jpg)
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-headers-mocked-up-36613.jpg)
#137
Super Member
The heads are installed, timing set and ready for cams. Will have bolts for cam bearing retainers on Monday. Valve covers on to keep stuff out of engine. New motor mounts installed and first coat of paint on super charger (will have several). Headers mocked. Will see if they can be installed before putting power plant back in car. (May need to be installed after power plant is in the car).
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-headers-mocked-up-36613.jpg)
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-headers-mocked-up-36613.jpg)
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#138
Junior Member
Join Date: Jul 2012
Location: New Jersey
Posts: 54
Likes: 0
Received 13 Likes
on
6 Posts
03 SL55, 07 Acura MDX
The heads are installed, timing set and ready for cams. Will have bolts for cam bearing retainers on Monday. Valve covers on to keep stuff out of engine. New motor mounts installed and first coat of paint on super charger (will have several). Headers mocked. Will see if they can be installed before putting power plant back in car. (May need to be installed after power plant is in the car).
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-headers-mocked-up-36613.jpg)
![](https://mbworld.org/forums/members/rawamg-218060-albums-rawamg-sl55-build-8592-picture-sl55-headers-mocked-up-36613.jpg)
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#139
Senior Member
Thread Starter
#140
Super Member
Uhhhhh thats sweet
))) every thing is coming together nicely
))) You will get a up-to-date - and hopefully - a reliable car there if you follow the line of accuracy and attention to details as you have done until now ![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
You should also examine the two flex rubber disks between the transmission and the rear ....... you will have to clean them properly to see if they are worn or not ....... - the one nearest to the transmission seems to be most under stress but it's not easy to see just by a glance .... acutely it comes more to light with close-up pics. and then on a laptop screen .....
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
You should also examine the two flex rubber disks between the transmission and the rear ....... you will have to clean them properly to see if they are worn or not ....... - the one nearest to the transmission seems to be most under stress but it's not easy to see just by a glance .... acutely it comes more to light with close-up pics. and then on a laptop screen .....
#141
Senior Member
Thread Starter
Uhhhhh thats sweet
))) every thing is coming together nicely
))) You will get a up-to-date - and hopefully - a reliable car there if you follow the line of accuracy and attention to details as you have done until now ![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
You should also examine the two flex rubber disks between the transmission and the rear ....... you will have to clean them properly to see if they are worn or not ....... - the one nearest to the transmission seems to be most under stress but it's not easy to see just by a glance .... acutely it comes more to light with close-up pics. and then on a laptop screen .....
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
You should also examine the two flex rubber disks between the transmission and the rear ....... you will have to clean them properly to see if they are worn or not ....... - the one nearest to the transmission seems to be most under stress but it's not easy to see just by a glance .... acutely it comes more to light with close-up pics. and then on a laptop screen .....
![Stick Out Tongue](https://mbworld.org/forums/images/smilies/tongue.gif)
#143
Former Vendor of MBWorld
Any updates Rick? Is this bad boy finished? Cant wait to see the dyno sheet and the car in person!
#144
Senior Member
Thread Starter
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
I am starting to seriously doubt it will make it to Timmayfest
![Mad](https://mbworld.org/forums/images/smilies/mad.gif)
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#146
Former Vendor of MBWorld
Where the pics Rick, I have no patience lol! Just messing with you brotha, but looking forward to seeing the progress.
#147
Senior Member
Thread Starter
#148
Senior Member
Thread Starter