SLK/R170: Fog Light Bulb and Removal
Thread Starter
Newbie
Joined: Apr 2007
Posts: 4
Likes: 0
Fog Light Bulb and Removal
Hi.. i need help with the fog light bulb for the 1998 SLK 230 Kompressor.. anyone know what type of bulb it uses? also, i hear that there are 2 bulbs on each side? is this correct? anyone have any guide to take the fog lights off?
Junior Member
Joined: Aug 2006
Posts: 50
Likes: 6
From: Columbia SC
95 E320 cab, 81 300D,, 83 300D
Tape/Other Attachment
Bazzle is right about the tape. I just bought an otherwise immaculate '99 Sport 230, with a missing drivers side foglight assy. I replaced both with some aftermarket HID lights I bought at NAPA. They look great, and are probably inferior quality, but for $50 I couldn't resist giving it a try. All works so far, and I didn't even have to put in load equalizers, which the CLK I have always requires - very resistance sensitive. I did not tape those access doors, and lost one on the highway the next day.
By the way, If anyone is interested, I do have the drivers side foglight complete assy. w/ bulb (all functional) for sale.
By the way, If anyone is interested, I do have the drivers side foglight complete assy. w/ bulb (all functional) for sale.
Almost a Member!
Joined: Jul 2004
Posts: 36
Likes: 0
fog lights
I have a questions about replacing the lens. I have replaced the bulbs before but the right fog lens caught a rock and broke. I can barely fit my hand in that little hole, let alone see how to replace the lens. I even took the wheel off and still couldn't get my head between the well and the rotor to see in the hole.
Anyone replace a lens before?
Anyone replace a lens before?
MBWorld Fanatic!
Joined: Mar 2002
Posts: 1,537
Likes: 2
From: Arizona, USA
W205 C300
I have a questions about replacing the lens. I have replaced the bulbs before but the right fog lens caught a rock and broke. I can barely fit my hand in that little hole, let alone see how to replace the lens. I even took the wheel off and still couldn't get my head between the well and the rotor to see in the hole.
Anyone replace a lens before?
Anyone replace a lens before?
Newbie
Joined: Mar 2005
Posts: 11
Likes: 0
From: Boston, MA
2001 SLK320, 6-speed, black, two-tone black/tan interior.
Speaking of replacing the lens on the fog lights, I have installed new headlights on my 01 SLK320 that have the non-cloudy lenses and I think they look great. Does anyone know if you can buy the crystal clear lenses for the fog lights and, if not available, if the whole fog light itself with the clear lenses is available for sale? Thanks, in advance.
Trending Topics
Newbie
Joined: Oct 2005
Posts: 17
Likes: 0
In addition to replacing the fog light lens... Here are the procedure that I use to do in replacing my BMW fog light lens that a friend of mine gave to me...
1. Remove the protective covering from your new fog light lens. Simply submerge the lens under hot water and peel the protective film form the lens.
2. Simply remove the existing fog light lens from your car..
3. Remove the existing damaged fog light lens by carefully chipping away the old lens from the unit. Also remove the previous fog light lens adhesive until there is a smooth surface in which to place the new BMW lens.
4. Apply a thin bead of sealant around your fog light lens so you can apply the new car lens.
5. Promptly place the new fog light lens in the appropriate space where the old lens was removed. Hold in place for several minutes.
6. Finally, simply refit the lamp into your car..
Hope this helps.. Good luck!!
1. Remove the protective covering from your new fog light lens. Simply submerge the lens under hot water and peel the protective film form the lens.
2. Simply remove the existing fog light lens from your car..
3. Remove the existing damaged fog light lens by carefully chipping away the old lens from the unit. Also remove the previous fog light lens adhesive until there is a smooth surface in which to place the new BMW lens.
4. Apply a thin bead of sealant around your fog light lens so you can apply the new car lens.
5. Promptly place the new fog light lens in the appropriate space where the old lens was removed. Hold in place for several minutes.
6. Finally, simply refit the lamp into your car..
Hope this helps.. Good luck!!
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Senior Member
Joined: Apr 2005
Posts: 374
Likes: 3
Another way to get to the fog lights is to remove the headlight and it is accessible in the space left.
To remove headlight unclip and remove corner indicator (hides a screw under)
Undo top and side screws
Unlug loom
Globe in 1998 non sport is H1.
Bazzle
To remove headlight unclip and remove corner indicator (hides a screw under)
Undo top and side screws
Unlug loom
Globe in 1998 non sport is H1.
Bazzle
Junior Member
Joined: Aug 2006
Posts: 50
Likes: 6
From: Columbia SC
95 E320 cab, 81 300D,, 83 300D
Crappy autozone lights
I just wanted to add that the current foglights on my slk were bought from Napa for $45 (I know that's a sin - but not my first). I was going on a trip and didn't want to drive with just one foglight, so I figured it was good cheap, temporary fix. Even crap should last a week, right. They are shown in my initial posting on this thread. One bolt installation took about thirty minutes. They are a small oval light with a blue tinted cover. A little ricey in the box, but I think they looked great after install. My "temporary" install occured 4 months ago. Lights still work and I didn't have to put in load equalizers like I did on the CLK to keep the bulb out warning off.
Newbie
Joined: Sep 2012
Posts: 3
Likes: 2
From: Pflugerville, Texas
SLK 230
Fog Light mystery
I don't know where you got this diagram, but mine were completely different. 1998 SLK 230. There were two bolts that had to be accessed from the bottom (almost inaccessible) and a couple of pegs that held it in place. Once I figured out how to get it loose, changing the lense was a breeze.
