Mark this thread as Unsold
FS: RENNtech v3 Digital Lowering Module
#1
FS: RENNtech v3 Digital Lowering Module
Hi people,
The all-new RENNtech V3 Digital Lowering Module allows users to raise and lower their ride height by simply using the RENNtech software provided and a USB cable. Once this state-of-the-art software is installed, simply connect the USB between your PC and the lowering module. Ride height can be configured independently between all four wheels, front to rear and even global adjustment of all four wheels simultaneously. Additionally, The V3 Digital Lowering Module is programed to allow users to specify different vehicle heights respective to differing speeds.
The V3 lowering module will fit the following cars
SL Class
R230 (4 wire)
R230 (after Feb 06, 3 wire)
S Class
W220 (ABC)
W220 (Airmatic)
W221 (Airmatic)
CL Class
W215
W216
CLS Class
W219 (4 wire)
E Class
W211 (4 wire)
ML/GL Class
W164 | X164
R Class
W251
more information can be found here:
http://www.renntechmercedes.com/showroom_suspension.php (scroll down a few frames)
I purchased the unit a few months ago from Fabspeed who had installed it in a customer’s car for about 2 months and he ended up selling the car and getting a Porsche instead. This unit is virtually brand new. It was due to be installed in my E55(Australia) but I have since sold the car due to business relocation. The Renntech V3 lowering module with optional 7” touch tablet lists for $1,945 USD, The unit is currently in Australia but I am visiting LA and NYC in about a week so you could save on shipping.
I'm after $1,200 USD + shipping if needed.
Thank you for looking,
Calvin02 at gmail dot com
The all-new RENNtech V3 Digital Lowering Module allows users to raise and lower their ride height by simply using the RENNtech software provided and a USB cable. Once this state-of-the-art software is installed, simply connect the USB between your PC and the lowering module. Ride height can be configured independently between all four wheels, front to rear and even global adjustment of all four wheels simultaneously. Additionally, The V3 Digital Lowering Module is programed to allow users to specify different vehicle heights respective to differing speeds.
The V3 lowering module will fit the following cars
SL Class
R230 (4 wire)
R230 (after Feb 06, 3 wire)
S Class
W220 (ABC)
W220 (Airmatic)
W221 (Airmatic)
CL Class
W215
W216
CLS Class
W219 (4 wire)
E Class
W211 (4 wire)
ML/GL Class
W164 | X164
R Class
W251
more information can be found here:
http://www.renntechmercedes.com/showroom_suspension.php (scroll down a few frames)
I purchased the unit a few months ago from Fabspeed who had installed it in a customer’s car for about 2 months and he ended up selling the car and getting a Porsche instead. This unit is virtually brand new. It was due to be installed in my E55(Australia) but I have since sold the car due to business relocation. The Renntech V3 lowering module with optional 7” touch tablet lists for $1,945 USD, The unit is currently in Australia but I am visiting LA and NYC in about a week so you could save on shipping.
I'm after $1,200 USD + shipping if needed.
Thank you for looking,
Calvin02 at gmail dot com
#6
I'm pretty certain it does not have to be connected at all times since they sell the module without the tablet, without the tablet or a laptop with software when you install the module the ride height be stay at what ever preset height RENNtech ships the module with.
Hope this helps
Calvin
Hope this helps
Calvin
Trending Topics
#9
MBWorld Fanatic!
Join Date: Apr 2009
Location: Lincoln, NE
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
2005 SL600, 2016 ES300h, 2012 Hayabusa
I got it in the mail, fast shipping for being from Australia, but has anyone installed one of these? I followed the instructions to the T and there is mention of some models use pin 23 for power instead of pin 48 but it doesn't say if it is on the 230 or not.