320 dreamer

well i was hoping to use these for my bbk upgrade but they wont work for my application. so here they are up for sale. 400$ plus shipping. they are heavy , 30lbs each so i will need your zip before i confirm a shipped price.

heres the link to the original sale pics are the same these havent been used

https://mbworld.org/forums/suspensio...1-02-12-a.html

i would consider a swap for a set of clk 63 hats and some shipping cash
before you ask i can tell you they should fit the
07 sl55
09 sl63
08 cls63
08 e63
other than those cars i cant help with the fitment rotor height is 64.7mm

Dan Wang

FYI, to help with the shipping costs, you can use the postal service flat rate box up to 70#.

320 dreamer

i will try that but not sure they will fit in the box, they are pretty huge!

gonzales25

Man...Sorry they didn't work out for you.

320 dreamer

its no biggie bro. no fault anywere. if i can find the clk63 or slk55 hats i can use all the hardware and the rings from these. if not ill have to buy a set and sell these. all part of modding were no one has modded before!

wally AMG

I'm the first in line for the rotors right?

320 dreamer

i have feelers out everywere for some hats but you got first dibbs

WaveyKat

are these the same size at the CLK63 030 package?

320 dreamer

yes 360x36mm do you have any clk63 hats you want to sell?

Viper98912

CLK55/CLK63/SLK55 used a 360x32mm rotor.

Dreamer, are you even sure if the hat bolt patterns would line up? You might need to make yourself some custom hats. There is one or two ppl on the W203 forum that have done the swap, might want to see what they did to accomodate the 26mm or so height difference.

320 dreamer

the clk63/slk55 rotor is only 3.3 mm offset more than my oem rotors. using the clk/slk hat i can use the rings and hardware from these rotors and have an almost oem fit. bolt pattern is the same.
for now im going to keep searching and hold on to these rotors

Viper98912

I guess the question is if both hat-to-rings have the same bolt pattern. Also, what is the 8 pot front offset, unless you plan on using some custom brackets. Good luck man, look forward to seeing the results.

320 dreamer

hat to rings same pattern. as for the caliper offset that i wont know until i have a rotor to mock them up with. rear setup is ez peazy only need to trim the backing plate and its bolt on.

320 dreamer

bump to the top. i have sold the 8 pot caliper so dont need these rotors. 450$ shipped in the usa.

320 dreamer

bump for the week and a couple pics

320 dreamer

bumpin for the week

wildcardfox

Pm sent. I'll take em

midnyite

hit me up if available

Tom_Boy

Lemme know if they are still available please.... Will send a PM...

320 dreamer

calipers sold . mods feel free to close the thread

khelawanb

I'm guessing you meant to say Rotors are sold? But if you still have them I will buy them.

320 dreamer

sorry bro. yes the rotors are sold