Ported TB from 73 mm to 76.2 mm
#26
Super Member
Originally Posted by dsc
Beside the TB did you hear anything about the Y pipe and air boxes? Any info on mounting? GIVE ME MORE INFO, PLEASE!
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Loren
#27
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Hi Loren,
Based on your info, I would assume that TB configuration is no longer available through parts dept... otherwise, why would Kleemann supply the 80mm from the V12TT and go through all the trouble of building an adapter plate and an electronic interface adapter??
I wonder if there is any way to track down the part # for this unit???
Based on your info, I would assume that TB configuration is no longer available through parts dept... otherwise, why would Kleemann supply the 80mm from the V12TT and go through all the trouble of building an adapter plate and an electronic interface adapter??
I wonder if there is any way to track down the part # for this unit???
Originally Posted by Loren
nope... this was all last year while going through my K2 and talking about the TBs with Cory. He said that it was odd in that many of the early 55s already HAD the larger TBs and then they went to what we have now... give him a call, I'm sure he knows a lot more about it that I'm reflecting...
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Loren
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Loren
#28
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 12 Likes
on
10 Posts
2003 E55 & 2014 GL550
Current mods: K&Ns, Hennessey Pulley, Evo headers & by-pass pipes, Heat wrap, Electronic cut out exhaust, Evo Cooling package, 19 in I-Forge Daytonas w/PS2s, Kleeman ECU and LSD, Altered AAM lowering kit, Star diag. -10C fan mod
#29
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
SLCharger,
I spoke to my parts guy and he confirmed that there are 3 different part # for the 2003 SL55 TB. I also confirmed with him that they did in fact produce a limited number of SL55 with the 80mm TB.
The only hurdle I have now is to figure out which Part # corresponds to the 80mm TB. If you can PM your VIN # for your car I would be EXTREMELY GRATEFUL, as I can then match the VIN # to the correct part # for the TB.
I would like to purchase this TB and see if I can get it to bolt on to my E55 as this is a direct replacement part and only requires opening up the supercharger inlet to 80mm.. No adapter plate or wiring harness changes are necessary..
This will also help out alot of people on the board as I know alot of them are interested in this modification.
I would really appreciate it if you could PM the VIN #. I will keep it confidential.
Thank you in advance.
I spoke to my parts guy and he confirmed that there are 3 different part # for the 2003 SL55 TB. I also confirmed with him that they did in fact produce a limited number of SL55 with the 80mm TB.
The only hurdle I have now is to figure out which Part # corresponds to the 80mm TB. If you can PM your VIN # for your car I would be EXTREMELY GRATEFUL, as I can then match the VIN # to the correct part # for the TB.
I would like to purchase this TB and see if I can get it to bolt on to my E55 as this is a direct replacement part and only requires opening up the supercharger inlet to 80mm.. No adapter plate or wiring harness changes are necessary..
This will also help out alot of people on the board as I know alot of them are interested in this modification.
I would really appreciate it if you could PM the VIN #. I will keep it confidential.
Thank you in advance.
#30
Senior Member
Join Date: Dec 2005
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
SL55AMG, ML420CDI, E320TCDI
Originally Posted by vrus
SLCharger,
I spoke to my parts guy and he confirmed that there are 3 different part # for the 2003 SL55 TB. I also confirmed with him that they did in fact produce a limited number of SL55 with the 80mm TB.
The only hurdle I have now is to figure out which Part # corresponds to the 80mm TB. If you can PM your VIN # for your car I would be EXTREMELY GRATEFUL, as I can then match the VIN # to the correct part # for the TB.
I would like to purchase this TB and see if I can get it to bolt on to my E55 as this is a direct replacement part and only requires opening up the supercharger inlet to 80mm.. No adapter plate or wiring harness changes are necessary..
This will also help out alot of people on the board as I know alot of them are interested in this modification.
I would really appreciate it if you could PM the VIN #. I will keep it confidential.
Thank you in advance.
I spoke to my parts guy and he confirmed that there are 3 different part # for the 2003 SL55 TB. I also confirmed with him that they did in fact produce a limited number of SL55 with the 80mm TB.
The only hurdle I have now is to figure out which Part # corresponds to the 80mm TB. If you can PM your VIN # for your car I would be EXTREMELY GRATEFUL, as I can then match the VIN # to the correct part # for the TB.
I would like to purchase this TB and see if I can get it to bolt on to my E55 as this is a direct replacement part and only requires opening up the supercharger inlet to 80mm.. No adapter plate or wiring harness changes are necessary..
This will also help out alot of people on the board as I know alot of them are interested in this modification.
I would really appreciate it if you could PM the VIN #. I will keep it confidential.
Thank you in advance.
Just kidding. WIN is on its way.
#31
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
SLCharger,
You are the best!! A million thanks for sending me the VIN#.. I just forwarded it to the parts guy to confirm which part # for the TB.. Keeping my fingers crossed that I can oder one and try it out.
Will let everyone know how it goes once I get my hands on it.
Thanks again!
Victor
You are the best!! A million thanks for sending me the VIN#.. I just forwarded it to the parts guy to confirm which part # for the TB.. Keeping my fingers crossed that I can oder one and try it out.
Will let everyone know how it goes once I get my hands on it.
Thanks again!
Victor
Originally Posted by SLcharger
How greatfull ?
Just kidding. WIN is on its way.
Just kidding. WIN is on its way.
#32
MBWorld Fanatic!
Thread Starter
Originally Posted by Jakpro1
No Kleemann Stage 3 cams??? Get you 15-20hp cloosseeerrrrrrr!!!! Plus top end hp too....great for those trap speeds.
LOL, I ran out of $$. Baby on the way and the Wife would veto it even if I asked. I need to consult on the side! I still have a hard time paying 4-6K installed for those cams.
I paid 1.5K and got 43 rwhp on my old Supra.
#34
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Good News!! Got the call from my parts guy. We found the correct Part # for the 80mm TB and it is being shipped to us from Germany!! Man.. these things are hard to get a hold of.
It was only available in Europe so the Part does not show up on a North American MB Dealer's parts computer.
I placed the order and should have it in my hands within 1 week. Will post more info once I have the TB in my hands. Hopefully this will bolt right on without any further modifications.
Want to pass along my THANK YOU to SLCharger!!!! He helped make this happen!
Stay tuned....
It was only available in Europe so the Part does not show up on a North American MB Dealer's parts computer.
I placed the order and should have it in my hands within 1 week. Will post more info once I have the TB in my hands. Hopefully this will bolt right on without any further modifications.
Want to pass along my THANK YOU to SLCharger!!!! He helped make this happen!
Stay tuned....
#35
Senior Member
Join Date: Dec 2005
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
SL55AMG, ML420CDI, E320TCDI
Originally Posted by vrus
Good News!! Got the call from my parts guy. We found the correct Part # for the 80mm TB and it is being shipped to us from Germany!! Man.. these things are hard to get a hold of.
It was only available in Europe so the Part does not show up on a North American MB Dealer's parts computer.
I placed the order and should have it in my hands within 1 week. Will post more info once I have the TB in my hands. Hopefully this will bolt right on without any further modifications.
Want to pass along my THANK YOU to SLCharger!!!! He helped make this happen!
Stay tuned....
It was only available in Europe so the Part does not show up on a North American MB Dealer's parts computer.
I placed the order and should have it in my hands within 1 week. Will post more info once I have the TB in my hands. Hopefully this will bolt right on without any further modifications.
Want to pass along my THANK YOU to SLCharger!!!! He helped make this happen!
Stay tuned....
#37
Administrator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Originally Posted by vrus
I would like to purchase this TB and see if I can get it to bolt on to my E55 as this is a direct replacement part and only requires opening up the supercharger inlet to 80mm.. No adapter plate or wiring harness changes are necessary..
Two questions:
1) How much did the 80mm TB cost?
2) What is involved in opening the supercharger inlet to 80mm?
Thanks
#38
MBWorld Fanatic!
Join Date: Apr 2005
Location: Brisbane, Australia
Posts: 1,117
Likes: 0
Received 0 Likes
on
0 Posts
2003 E55
Can you tell us the part number?
Is the part number somewhere visible so we can check our own cars?
Us non-USA owers with 2003's just might be in luck - nice if we could check the part or the VIN# of our cars.
thanks.
Is the part number somewhere visible so we can check our own cars?
Us non-USA owers with 2003's just might be in luck - nice if we could check the part or the VIN# of our cars.
thanks.
#39
Member
Join Date: Jul 2004
Location: CA
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
996 supercharged C4cab widebody, x-5 (4.4), sl-55 kleeman, RR
i too would like the part number of this larger TB.
i did hear that later 03 sl55 were detuned for the release of the sl600.
i did hear that later 03 sl55 were detuned for the release of the sl600.
#40
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Originally Posted by Rock
Vic,
Two questions:
1) How much did the 80mm TB cost?
2) What is involved in opening the supercharger inlet to 80mm?
Thanks
Two questions:
1) How much did the 80mm TB cost?
2) What is involved in opening the supercharger inlet to 80mm?
Thanks
2) Since this part is from an SL55, I am *HOPING* that it will be a direct bolton to the supercharger inlet requiring only the enlargement of the metal gasket that goes between the TB and the supercharger inlet, and the enlargement of the supercharger inlet itself. Doing the enlargement can be done very easily with a hand dremel tool with the supercharger still installed in the vehicle.
I'll confirm all of this information once I have it in my hands and have had a chance to look it over. Once I know it will work for sure, I'll share all the info and availability information.
The trick will be trying to get more of them. My parts guy pulled some strings and got one rush delivered for us. I just dont know how difficult it will be to get more of them if it turns out to be a viable solution.
I was told earlier tonight that they are expediting the shipping and it should be here in 3 - 4 days.
Hang in there.. This should be interesting.
#41
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Just to be clear, this was only available on the 2003 SL55 and only for a short period of time.
I dont have the Part # in my hands.. My parts guy found it by entering in the VIN # I received and it supplying the Part # for the correct TB for that particular car.
Once I receive the package, I'll confirm the Part # for you guys.
I dont have the Part # in my hands.. My parts guy found it by entering in the VIN # I received and it supplying the Part # for the correct TB for that particular car.
Once I receive the package, I'll confirm the Part # for you guys.
Originally Posted by OzE55
Can you tell us the part number?
Is the part number somewhere visible so we can check our own cars?
Us non-USA owers with 2003's just might be in luck - nice if we could check the part or the VIN# of our cars.
thanks.
Is the part number somewhere visible so we can check our own cars?
Us non-USA owers with 2003's just might be in luck - nice if we could check the part or the VIN# of our cars.
thanks.
#43
MBWorld Fanatic!
Thread Starter
Evo Sport
I called and left a couple of messages for Simon at Evo but have not connected yet with him.
From the sounds of it from Mike at Evo the cost to port the stock TB to 76mm and to change the butter fly plate is a whopping $1300.
How can that be possible. What am i missing here?
I paid $200 -- 1.5 hours for install and 1.5 hours for porting the front part. Maybe I will just ask to buy the butter fly piece.
From the sounds of it from Mike at Evo the cost to port the stock TB to 76mm and to change the butter fly plate is a whopping $1300.
How can that be possible. What am i missing here?
I paid $200 -- 1.5 hours for install and 1.5 hours for porting the front part. Maybe I will just ask to buy the butter fly piece.
#44
Senior Member
Join Date: Nov 2003
Location: toronto
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Audi's, a whole bunch of them
Originally Posted by e55 baller
From the sounds of it from Mike at Evo the cost to port the stock TB to 76mm and to change the butter fly plate is a whopping $1300.
How can that be possible. What am i missing here?
I paid $200 -- 1.5 hours for install and 1.5 hours for porting the front part. Maybe I will just ask to buy the butter fly piece.
![poke](https://mbworld.org/forums/images/smilies/stickpoke.gif)
#45
MBWorld Fanatic!
Rougly speaking - the flow increase would be as much as 20-25% more going from a 73mm to a 80mm TB.
This obviously will help power and must be the easiest and safest mod we can do to our cars.... sounds like its worth 20-30HP judging from SLChargers comments.
I cannot wait to see if it works out.
Rgds Steve.
This obviously will help power and must be the easiest and safest mod we can do to our cars.... sounds like its worth 20-30HP judging from SLChargers comments.
I cannot wait to see if it works out.
Rgds Steve.
#46
Administrator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
I spoke with Cory (Kleemann) about this part and he informed me that it is not an easy bolt-on. Other, not so simple modifications are needed. I am anxious to see what Vic has to say after he has this part in hand.
#47
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Uh oh... So it's not going to be a slap on job... I guess this is going to be an interesting project then.
I just cant understand how it isn't a bolt on piece. Did MB really change so many things on the SL55 just to detune it ??? I would expect the mounting position is identical except that the supercharger inlet is enlarged.. but, then again, what do I know..
Keeping my fingers crossed... Thanks for the update.
I just cant understand how it isn't a bolt on piece. Did MB really change so many things on the SL55 just to detune it ??? I would expect the mounting position is identical except that the supercharger inlet is enlarged.. but, then again, what do I know..
Keeping my fingers crossed... Thanks for the update.
Originally Posted by Rock
I spoke with Cory (Kleemann) about this part and he informed me that it is not an easy bolt-on. Other, not so simple modifications are needed. I am anxious to see what Vic has to say after he has this part in hand.
#48
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
The $1300 they quoted you was for a COMPLETE TB assembly AND the port job.
Originally Posted by e55 baller
I called and left a couple of messages for Simon at Evo but have not connected yet with him.
From the sounds of it from Mike at Evo the cost to port the stock TB to 76mm and to change the butter fly plate is a whopping $1300.
How can that be possible. What am i missing here?
I paid $200 -- 1.5 hours for install and 1.5 hours for porting the front part. Maybe I will just ask to buy the butter fly piece.
From the sounds of it from Mike at Evo the cost to port the stock TB to 76mm and to change the butter fly plate is a whopping $1300.
How can that be possible. What am i missing here?
I paid $200 -- 1.5 hours for install and 1.5 hours for porting the front part. Maybe I will just ask to buy the butter fly piece.
#50
MBWorld Fanatic!
Thread Starter
Originally Posted by vrus
The $1300 they quoted you was for a COMPLETE TB assembly AND the port job.