RENNtech new digitial lowering module
#77
Banned
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
I agree.. I bought the module because I thought adjustment was going to be easy.. Having those knobs hidden and the module inaccessible I dont like.
I will have to do the same thing that Jangy did.. I want it somewhere that I can get to it without taking the car apart.
Adam: You should give Renntech some feedback and see if they can extend the wiring harness and expose the control knobs.
I will have to do the same thing that Jangy did.. I want it somewhere that I can get to it without taking the car apart.
Adam: You should give Renntech some feedback and see if they can extend the wiring harness and expose the control knobs.
#78
MBWorld Fanatic!
Join Date: Apr 2006
Location: Chicago
Posts: 1,046
Likes: 0
Received 0 Likes
on
0 Posts
04 E55
I thought it would be accessible too...thats kind of a foolish design flaw...why have the options if you have to pull the carpet up and unscrew the panel ...
#80
Originally Posted by jangy
I'll try to post some pics today.
#81
Out Of Control!!
Thread Starter
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Originally Posted by 2K6E55
The smoked tail lights turned out really good. Although I will be doing mine a bit darker. Still waiting for your Rims to arrive!
Also, does it ride with the DPE rears? I won't get the painted rims till monday and my spare rears are in Irvine, but I wanted to show the fellas the module at tomorrow's meet.
#82
MBWorld Fanatic!
Join Date: Dec 2005
Location: Fremont, CA.
Posts: 1,329
Likes: 0
Received 0 Likes
on
0 Posts
SL55 AMG, 2006 Range Rover Sport with Kahn Design Package
SL lowered with Renntech lowering module
Pictures!
Last edited by art@kronen; 04-11-2007 at 10:07 PM.
#83
Out Of Control!!
Thread Starter
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Hehe...took until midnight, but it is DONE!!
Digital baby. 50mm is NICE!!
Rims won't be ready til Monday, so I can't show off the offset but it still drops nice and low.
No bouncing at all even at the lowest setting, but don't forget I have 18s.
Pics tomorrow. I need sleeppppp....
Digital baby. 50mm is NICE!!
Rims won't be ready til Monday, so I can't show off the offset but it still drops nice and low.
No bouncing at all even at the lowest setting, but don't forget I have 18s.
Pics tomorrow. I need sleeppppp....
#84
Senior Member
Join Date: Mar 2005
Location: orlando,fl.
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
2005 e55
Originally Posted by Griffin337
Can anyone verify this?? that would be awesome.. I dont want to have to deal with the negative camber issue issue with it being lowered.. But if while driving it raises that would ease my worries!
Thanks!
Thanks!
#85
Senior Member
Join Date: Mar 2005
Location: orlando,fl.
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
2005 e55
Originally Posted by jangy
Hehe...took until midnight, but it is DONE!!
Digital baby. 50mm is NICE!!
Rims won't be ready til Monday, so I can't show off the offset but it still drops nice and low.
No bouncing at all even at the lowest setting, but don't forget I have 18s.
Pics tomorrow. I need sleeppppp....
Digital baby. 50mm is NICE!!
Rims won't be ready til Monday, so I can't show off the offset but it still drops nice and low.
No bouncing at all even at the lowest setting, but don't forget I have 18s.
Pics tomorrow. I need sleeppppp....
#86
Newbie
Join Date: Jul 2006
Location: Boca Raton, FL
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
CLS500, CLK500
Originally Posted by jangy
Also, here is the deal with the function:
You set the height as you like it. When it gets to speed (~75mph), it reverts to the manufacturer's settings. So, when your car usually drops to a point at that speed, the RENN unit will either drop OR raise to match that final height. In all, when you are going 80mph and up, it is as if the unit is not there.
If all this is correct, I may also be using my links to get the ride the way I like it and then mess with the module for "looks"
You set the height as you like it. When it gets to speed (~75mph), it reverts to the manufacturer's settings. So, when your car usually drops to a point at that speed, the RENN unit will either drop OR raise to match that final height. In all, when you are going 80mph and up, it is as if the unit is not there.
If all this is correct, I may also be using my links to get the ride the way I like it and then mess with the module for "looks"
#87
Super Member
Join Date: Nov 2004
Location: Soulcal
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
///E63V10 ///F80CS ///Can-Am X3 XRS
Saw Jang's car this morning. It looks evil with the Renntech drop, black tinted windows, black grill, debadged and smoked tail lights.
#88
Super Member
Join Date: Jul 2004
Location: Puerto Rico
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
08' S550,,,C63!
Originally Posted by JAY55
Saw Jang's car this morning. It looks evil with the Renntech drop, black tinted windows, black grill, debadged and smoked tail lights.
#89
Super Member
Join Date: Nov 2004
Location: Soulcal
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
///E63V10 ///F80CS ///Can-Am X3 XRS
Originally Posted by esport
I cant wait to see Pic's.... I also ordered the paint for my tail lamps and will have them painted this week.
#90
Out Of Control!!
Thread Starter
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Originally Posted by toolsivan
Sorry, not true. The module is not changing with speed. It acts pretty much like mechanical links in that way - meaning it creates an offset from what the car normally does. You really do not need to combine this with a mechanical solution...
Adjustable Lowering Module
RENNtech's new generation lowering module now available!
This all new lowering module does away the analog control of competitors and replaces it with a module that is controlled by four digital microprocessors. Digital control eliminates the temperature variations as well as any inconsistencies of the older generation modules. This module will fit any ABC or AirMatic Mercedes using a user selectable switch.
The digital design also allows for a module that can be adjusted to provide any height between stock to a ground slammed 50mm lower. This is achieved by individual wheel height adjustment. Using eight position rotary switches the user can adjust each front wheel and the rear axle height individually.
This revolutionary device is encased in a watertight molded ABS enclosure and utilizes an automotive grade waterproof electrical connector. All required hardware as well as a comprehensive installation manual are included in the ready to install kit.
This all new lowering module does away the analog control of competitors and replaces it with a module that is controlled by four digital microprocessors. Digital control eliminates the temperature variations as well as any inconsistencies of the older generation modules. This module will fit any ABC or AirMatic Mercedes using a user selectable switch.
The digital design also allows for a module that can be adjusted to provide any height between stock to a ground slammed 50mm lower. This is achieved by individual wheel height adjustment. Using eight position rotary switches the user can adjust each front wheel and the rear axle height individually.
This revolutionary device is encased in a watertight molded ABS enclosure and utilizes an automotive grade waterproof electrical connector. All required hardware as well as a comprehensive installation manual are included in the ready to install kit.
http://www.renntechmercedes.com/PDF/..._CLS_04_06.pdf
Last edited by jangy; 07-22-2006 at 09:02 PM.
#92
Out Of Control!!
Thread Starter
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Originally Posted by vader
I want to see it at rest with the stock 18's Jangy !! Come on...
#93
Super Member
Join Date: Jul 2004
Location: Puerto Rico
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
08' S550,,,C63!
Originally Posted by jangy
No problem. I'll do it stock height, my height, and dumped. Give me till afternoon sunday and I'll do it.
Really Nice! I have to say the smoked tail lamps just finished of the sleeper effect! I cant wait to have them done on my car. By the way the Suspention looks wicked low! Can you still lower and raise your car VIA the interior factory setting as well?
Last but not least your car while in motion looks very in aggresive!
#94
Super Member
Join Date: Jul 2004
Location: Puerto Rico
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
08' S550,,,C63!
Originally Posted by jangy
Sorry, VERY true. Digital, baby!!
http://www.renntechmercedes.com/PDF/..._CLS_04_06.pdf
Adjustable Lowering Module
RENNtech's new generation lowering module now available!
This all new lowering module does away the analog control of competitors and replaces it with a module that is controlled by four digital microprocessors. Digital control eliminates the temperature variations as well as any inconsistencies of the older generation modules. This module will fit any ABC or AirMatic Mercedes using a user selectable switch.
The digital design also allows for a module that can be adjusted to provide any height between stock to a ground slammed 50mm lower. This is achieved by individual wheel height adjustment. Using eight position rotary switches the user can adjust each front wheel and the rear axle height individually.
This revolutionary device is encased in a watertight molded ABS enclosure and utilizes an automotive grade waterproof electrical connector. All required hardware as well as a comprehensive installation manual are included in the ready to install kit.
This all new lowering module does away the analog control of competitors and replaces it with a module that is controlled by four digital microprocessors. Digital control eliminates the temperature variations as well as any inconsistencies of the older generation modules. This module will fit any ABC or AirMatic Mercedes using a user selectable switch.
The digital design also allows for a module that can be adjusted to provide any height between stock to a ground slammed 50mm lower. This is achieved by individual wheel height adjustment. Using eight position rotary switches the user can adjust each front wheel and the rear axle height individually.
This revolutionary device is encased in a watertight molded ABS enclosure and utilizes an automotive grade waterproof electrical connector. All required hardware as well as a comprehensive installation manual are included in the ready to install kit.
http://www.renntechmercedes.com/PDF/..._CLS_04_06.pdf
#95
Out Of Control!!
Thread Starter
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Originally Posted by esport
Jangy,
Really Nice! I have to say the smoked tail lamps just finished of the sleeper effect! I cant wait to have them done on my car. By the way the Suspention looks wicked low! Can you still lower and raise your car VIA the interior factory setting as well?
Last but not least your car while in motion looks very in aggresive!
Really Nice! I have to say the smoked tail lamps just finished of the sleeper effect! I cant wait to have them done on my car. By the way the Suspention looks wicked low! Can you still lower and raise your car VIA the interior factory setting as well?
Last but not least your car while in motion looks very in aggresive!
I had my tuner do it. They spent a good 5 hours on it, but they extended the harness AND actual pins so that I can access it as I feel.
By the way, changes to the settings DO not take effect until car is back in park, so there is even the safety feature in case someone's leg happens to kick it.
#96
Out Of Control!!
Thread Starter
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Originally Posted by esport
How was the installation was it hard to install or easy? I am still having doubts towards the installation!
#97
Super Member
Join Date: Jul 2004
Location: Puerto Rico
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
08' S550,,,C63!
Originally Posted by jangy
It is simple wiring. Yes, it MUST be done correctly. But any great audio installer can snap it out. Very simple and integrates right into the MB system.
![Wootrock](https://mbworld.org/forums/images/smilies/wootrock.gif)
#98
Out Of Control!!
Thread Starter
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Ok, sorry guys been real busy and haven't had a chance to pull the car out.
Here's a few teaser pics. Thanks, ling I stole them from your site.
Enjoy....
Here's a few teaser pics. Thanks, ling I stole them from your site.
Enjoy....
Last edited by jangy; 08-06-2006 at 12:49 PM.
#100
Super Member
Join Date: Jul 2004
Location: Puerto Rico
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
08' S550,,,C63!
Originally Posted by jangy
Ok, sorry guys been real busy and haven't had a chance to pull the car out.
Here's a few teaser pics. Thanks, ling I stole them from your site.
Enjoy....
Here's a few teaser pics. Thanks, ling I stole them from your site.
Enjoy....
![wall](https://mbworld.org/forums/images/smilies/banghead.gif)