Finally in the tens (10.745 @ 132.21)
#1
MBWorld Fanatic!
Thread Starter
Finally in the tens (10.745 @ 132.21)
Went to Moroso tonight and had a good outing. The car ran strong thanks to the VRUS TB and VRUS ecu tune. I got the tune from him last week and went straight to the dyno. I will post the graphs in another thread in the morning. Sorry Vrus, I had to let the cat out of the bag.
Slip nitrous pass - 0770. The weather was in the 70's , mid to low humidity.
![](http://img165.imageshack.us/img165/5702/e55noshs0.jpg)
The car has got more in it if i can hit the nitrous a little sooner.
My best motor pass below
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
Slip nitrous pass - 0770. The weather was in the 70's , mid to low humidity.
![](http://img165.imageshack.us/img165/5702/e55noshs0.jpg)
The car has got more in it if i can hit the nitrous a little sooner.
My best motor pass below
![](http://img441.imageshack.us/img441/7178/e55motorrt8.jpg)
#3
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
I'll give mad props to your 11.34 @ 123 w/out NOS
but seriously anyone can use NOS you could put it on a riding lawn mower for christ sakes
these E's are speed demons on forced induction & motor, NOS is just like cheating.
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
Last edited by Thericker; 02-10-2007 at 04:37 AM.
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
Thanks Ted.
I figured i had to do it now before you finish your turbo project because once you are done i for see some very fast times.
I have DerekFSU's old rims and tires. He is still the Daddy in my book. The first person to spray our e55's with ecu and mods and run 10's.
I think it makes me the fastest posted time. Malcom from high-tech is a good three tenths faster. Thanks again.
#9
MBWorld Fanatic!
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
rflow 306 Does it again
I witness RFLOWS306 record run last night!
There was about 20 guys on the fence by me. When Albert's car launched last night ,
The right rear of the car hunkered down and the left front lifted dramatically. I thought he was going to pull the front wheels off the ground. The rear tires never spun. holy wtf!! Then I looked at the light and time posted. I started hooping and hollering. The guys around me were in awe ,I said ""Not bad for a lease car"".
There was some unhappy guys and some money changing hands in the bleachers. I watched Albert struggle for over a year. He has made the grade AAA+. His work and dedication have paid off. He is the man.
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
There was some unhappy guys and some money changing hands in the bleachers. I watched Albert struggle for over a year. He has made the grade AAA+. His work and dedication have paid off. He is the man.
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
#17
MBWorld Fanatic!
Thread Starter
We should try and set-up an event at Moroso or Bradenton to get a bigger turn-out.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![Nx](https://mbworld.org/forums/images/smilies/nx.gif)
Last edited by rflow306; 02-10-2007 at 09:41 AM.
#18
MBWorld Fanatic!
Damn dude, that is awesome! I'll bet there's a little more in it with an earlier hit. You can break into the 1.6x short times and get down to the 10.5x range!
#20
Out Of Control!!
Well I've been tempted for quite some time now. I'm worried that with a 10.5:1 compression ratio and a slapped on s/c running 7 PSI, the addition of nitrous will make it go kaboom! I'm probably going to unload the car at the end of this show season and pick something new up anyway. What size shot are you running and I'm assuming its wet right?
#21
MBWorld Fanatic!
Thread Starter
On the motor pass the car next to me was a new ZO6 with headers and ecu. After my first pass he dialed in my same time and lined up next to me. It was an awesome race, i could see him coming like freight train.
Did you finish the turbs on Z ?
#22
MBWorld Fanatic!
Thread Starter
Well I've been tempted for quite some time now. I'm worried that with a 10.5:1 compression ratio and a slapped on s/c running 7 PSI, the addition of nitrous will make it go kaboom! I'm probably going to unload the car at the end of this show season and pick something new up anyway. What size shot are you running and I'm assuming its wet right?
I witness RFLOWS306 record run last night!
There was about 20 guys on the fence by me. When Albert's car launched last night ,
The right rear of the car hunkered down and the left front lifted dramatically. I thought he was going to pull the front wheels off the ground. The rear tires never spun. holy wtf!! Then I looked at the light and time posted. I started hooping and hollering. The guys around me were in awe ,I said ""Not bad for a lease car"".
There was some unhappy guys and some money changing hands in the bleachers. I watched Albert struggle for over a year. He has made the grade AAA+. His work and dedication have paid off. He is the man.
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
There was some unhappy guys and some money changing hands in the bleachers. I watched Albert struggle for over a year. He has made the grade AAA+. His work and dedication have paid off. He is the man.
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)