Amg 63 R&d #1
#1
Banned
Thread Starter
Join Date: Mar 2006
Location: Southern California
Posts: 2,855
Likes: 0
Received 2 Likes
on
2 Posts
S600TT, R350
Amg 63 R&d #1
Ladies and Gentlemen:
The time has come to unlock the power secrets of AMG M156 6.2L Engine.
Let me introduce you to our latest project vehicle - 2007 E63.
The car has been lowered through STAR and has 20'' Vellano Forged Wheels with 245/35 on the front and 275/30 in the back.
I will be taking it to the dealer tomorrow to make sure it has all of the latest software upgrades done. After that it goes on the Dynojet for a baseline.
I am working on a line of performance products. I will post more information within next several days.
All of the parts, with exception of some exhaust components, should work on all 63 accross all chassis (S/CL/E/CLS/C/ML/R/CLK). As we progress I will confirm the application.
Thank you for listening.
The time has come to unlock the power secrets of AMG M156 6.2L Engine.
Let me introduce you to our latest project vehicle - 2007 E63.
The car has been lowered through STAR and has 20'' Vellano Forged Wheels with 245/35 on the front and 275/30 in the back.
I will be taking it to the dealer tomorrow to make sure it has all of the latest software upgrades done. After that it goes on the Dynojet for a baseline.
I am working on a line of performance products. I will post more information within next several days.
All of the parts, with exception of some exhaust components, should work on all 63 accross all chassis (S/CL/E/CLS/C/ML/R/CLK). As we progress I will confirm the application.
Thank you for listening.
#5
Banned
Thread Starter
Join Date: Mar 2006
Location: Southern California
Posts: 2,855
Likes: 0
Received 2 Likes
on
2 Posts
S600TT, R350
Yeah, Yeah, Yeah but will it run an 11sec. 1/4 mile?
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
This is excellent as I have not found much for the 63! Any pics of the car from the side so that I can see the wheels better?
#6
Ladies and Gentlemen:
The time has come to unlock the power secrets of AMG M156 6.2L Engine.
Let me introduce you to our latest project vehicle - 2007 E63.
The car has been lowered through STAR and has 20'' Vellano Forged Wheels with 245/35 on the front and 275/30 in the back.
I will be taking it to the dealer tomorrow to make sure it has all of the latest software upgrades done. After that it goes on the Dynojet for a baseline.
I am working on a line of performance products. I will post more information within next several days.
All of the parts, with exception of some exhaust components, should work on all 63 accross all chassis (S/CL/E/CLS/C/ML/R/CLK). As we progress I will confirm the application.
Thank you for listening.
The time has come to unlock the power secrets of AMG M156 6.2L Engine.
Let me introduce you to our latest project vehicle - 2007 E63.
The car has been lowered through STAR and has 20'' Vellano Forged Wheels with 245/35 on the front and 275/30 in the back.
I will be taking it to the dealer tomorrow to make sure it has all of the latest software upgrades done. After that it goes on the Dynojet for a baseline.
I am working on a line of performance products. I will post more information within next several days.
All of the parts, with exception of some exhaust components, should work on all 63 accross all chassis (S/CL/E/CLS/C/ML/R/CLK). As we progress I will confirm the application.
Thank you for listening.
#7
Member
Join Date: Sep 2005
Location: Riverside County
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
2013 SL550 2013 M6 f12 2011 X5M
Hi Vadim,
I just got a blk/blk E63, I'm looking for wheels too, can you post up closer shots of the wheels, they look good. I'm thinking about going toward that direction or HRE 847R painted blk like MOGZ'S.
THANKS
I just got a blk/blk E63, I'm looking for wheels too, can you post up closer shots of the wheels, they look good. I'm thinking about going toward that direction or HRE 847R painted blk like MOGZ'S.
THANKS
Trending Topics
#8
Banned
Thread Starter
Join Date: Mar 2006
Location: Southern California
Posts: 2,855
Likes: 0
Received 2 Likes
on
2 Posts
S600TT, R350
I just got a blk/blk E63, I'm looking for wheels too, can you post up closer shots of the wheels, they look good. I'm thinking about going toward that direction or HRE 847R painted blk like MOGZ'S.
Call me, I can get either Vollanos or HREs.
#9
Super Member
Join Date: Jan 2007
Location: da long island
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
1989 Toyota Tercel Coupé
wheels look great and looking forward to some new parts for the e63, i bet those rims would look sick with a matte black power coat on the white car
#10
MBWorld Fanatic!
Join Date: Dec 2005
Location: Rowland Heights,CA
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
W203 (sold), W204 (sold), W124
Hey Vadim,
Can you post more pics of your E63? I would like to see pics of the car where the pano roof can be seen from the front and back. Thank you!
Can you post more pics of your E63? I would like to see pics of the car where the pano roof can be seen from the front and back. Thank you!
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#13
Senior Member
Join Date: Dec 2006
Location: Vancouver Canada
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
07 ML63 Silver Dead at 85k, 14 RS5, 05 SL600
Eagerly awaiting the results of your project. Please keep us informed. Will you be posting in the E forum only or other 63 vehicles? BTW unlike some here I too love (your) chrome accented wheels. Would they work on an silver SL600?
Last edited by kokanee; 07-18-2007 at 03:08 AM. Reason: typo
#16
Banned
Thread Starter
Join Date: Mar 2006
Location: Southern California
Posts: 2,855
Likes: 0
Received 2 Likes
on
2 Posts
S600TT, R350
Thank you for all the kudos, guys!!!
Of course, call me for details.
Here you go!
Would they work on an silver SL600
Can you post more pics of your E63? I would like to see pics of the car where the pano roof can be seen from the front and back. Thank you!
#17
Banned
Thread Starter
Join Date: Mar 2006
Location: Southern California
Posts: 2,855
Likes: 0
Received 2 Likes
on
2 Posts
S600TT, R350
Took the car to MB of South Bay earlier today and got latest engine and transmission software flashed. Car had software from "tuner wanna-be", who shall remain un-named, and was audibly detonating under part and wide open throttle.
From there I ran it to Powertain Dynamics for a quick baseline.
Car does have 20'' wheels and although they are forged and lighter than most cast wheels they still add unsprung weight.
I have dynoed several 63s in the past and they were in 420RWHP range. AMG rates the car at 504HP, so 420/504 = 0.833, which represents 17% drivetrain loss. Which corresponds to my previous experience dynoying MBs/AMGs.
I was expecting to be down about 15-20HP, due to the wheels. This is exactly what we saw - 400RWHP and 365RWTQ.
I do have a set of stock wheels and will redyno the car sometime this week.
From there I ran it to Powertain Dynamics for a quick baseline.
Car does have 20'' wheels and although they are forged and lighter than most cast wheels they still add unsprung weight.
I have dynoed several 63s in the past and they were in 420RWHP range. AMG rates the car at 504HP, so 420/504 = 0.833, which represents 17% drivetrain loss. Which corresponds to my previous experience dynoying MBs/AMGs.
I was expecting to be down about 15-20HP, due to the wheels. This is exactly what we saw - 400RWHP and 365RWTQ.
I do have a set of stock wheels and will redyno the car sometime this week.
#18
Super Moderator
Now that you’ve established your baseline, it’s all uphill (numbers wise) from here!
Is it running a bit rich for a NA motor? Best wishes with all of your R&D.
What a great job you have done to inform and enlighten AMG fanatics through the years.
Keep it coming!
Is it running a bit rich for a NA motor? Best wishes with all of your R&D.
What a great job you have done to inform and enlighten AMG fanatics through the years.
Keep it coming!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#19
MBWorld Fanatic!
Join Date: Aug 2005
Location: Southern Cali (Ontario)
Posts: 3,466
Likes: 0
Received 10 Likes
on
10 Posts
Took the car to MB of South Bay earlier today and got latest engine and transmission software flashed. Car had software from "tuner wanna-be", who shall remain un-named, and was audibly detonating under part and wide open throttle.
From there I ran it to Powertain Dynamics for a quick baseline.
Car does have 20'' wheels and although they are forged and lighter than most cast wheels they still add unsprung weight.
I have dynoed several 63s in the past and they were in 420RWHP range. AMG rates the car at 504HP, so 420/504 = 0.833, which represents 17% drivetrain loss. Which corresponds to my previous experience dynoying MBs/AMGs.
I was expecting to be down about 15-20HP, due to the wheels. This is exactly what we saw - 400RWHP and 365RWTQ.
I do have a set of stock wheels and will redyno the car sometime this week.
From there I ran it to Powertain Dynamics for a quick baseline.
Car does have 20'' wheels and although they are forged and lighter than most cast wheels they still add unsprung weight.
I have dynoed several 63s in the past and they were in 420RWHP range. AMG rates the car at 504HP, so 420/504 = 0.833, which represents 17% drivetrain loss. Which corresponds to my previous experience dynoying MBs/AMGs.
I was expecting to be down about 15-20HP, due to the wheels. This is exactly what we saw - 400RWHP and 365RWTQ.
I do have a set of stock wheels and will redyno the car sometime this week.
torque seems a bit low. I know the wheels are robbing power, but 365 rwtq is not enough.
335i w/ procede are putting that and more...
Last question VADIM: IHow much for a Dyno session with you? I have ASP pullies and I'm not sure if I getting all the power from the car.
#20
Super Member
Join Date: Mar 2003
Location: Toronto, Canada
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
540 6spd
I have dynoed several 63s in the past and they were in 420RWHP range. AMG rates the car at 504HP, so 420/504 = 0.833, which represents 17% drivetrain loss. Which corresponds to my previous experience dynoying MBs/AMGs.
I was expecting to be down about 15-20HP, due to the wheels. This is exactly what we saw - 400RWHP and 365RWTQ.
I do have a set of stock wheels and will redyno the car sometime this week.
#21
Banned
Thread Starter
Join Date: Mar 2006
Location: Southern California
Posts: 2,855
Likes: 0
Received 2 Likes
on
2 Posts
S600TT, R350
Is it running a bit rich for a NA motor? Best wishes with all of your R&D.
What a great job you have done to inform and enlighten AMG fanatics through the years.
Keep it coming!
What a great job you have done to inform and enlighten AMG fanatics through the years.
Keep it coming!
Thanks for the kudos!
torque seems a bit low. I know the wheels are robbing power, but 365 rwtq is not enough.
335i w/ procede are putting that and more...
Last question VADIM: IHow much for a Dyno session with you? I have ASP pullies and I'm not sure if I getting all the power from the car.
335i w/ procede are putting that and more...
Last question VADIM: IHow much for a Dyno session with you? I have ASP pullies and I'm not sure if I getting all the power from the car.
As far as dyno, give me a call. I will set it up with you.
Why does the fine print on the bottom left of the chart read 417hp & 410ft-lbs?
#22
MBWorld Fanatic!
Join Date: Sep 2006
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
06 EuroElites E55
#24
MBWorld Fanatic!
Join Date: Mar 2003
Location: So Cal
Posts: 2,434
Likes: 0
Received 0 Likes
on
0 Posts
2010 RRS ; BMW K1200R; 14 E350 ; 14 RRS on order
ABOUT F-ING TIME DUDE!!
Sweet!!! I can't wait. I'll stop by sometime this week to take a look. When are you gonna setup a AMG meet at your shop?
Sweet!!! I can't wait. I'll stop by sometime this week to take a look. When are you gonna setup a AMG meet at your shop?