Brabus Front Lip Finally Installed!! (Pics)
#1
Administrator
Thread Starter
Brabus Front Lip Finally Installed!! (Pics)
Well after about a three month wait, Brabus finally sent me another Carbon-fiber lip after UPS damaged the first one. I also installed a CF rear diffuser from EuroRev but it fell off during the photo shoot........ Haha, I need more than double sided tape.
Anyway, the Brabus lip is a nice piece and it is a perfect fit. I know Neal also offers a nice lip but I thought this piece could pass for a factory addition. I like the clean look that it creates.
Also, I forgot to tell you that they offered me a real bargin for this lip.
A few pics:
Anyway, the Brabus lip is a nice piece and it is a perfect fit. I know Neal also offers a nice lip but I thought this piece could pass for a factory addition. I like the clean look that it creates.
Also, I forgot to tell you that they offered me a real bargin for this lip.
A few pics:
Trending Topics
#14
Administrator
Thread Starter
Yes, It kind of clips over the existing lower lip and on the underside there are a couple of holes that attach to existing anchors. No drilling is needed.
Last edited by Rock; 08-18-2007 at 11:29 PM.
#15
Super Member
Join Date: Apr 2006
Posts: 511
Received 0 Likes
on
0 Posts
'11/E63-Former car: '05 RT4 E55, Sprintbooster, Phenolic Spacers, RT IC /Secondary HE & BMC Filters
no drilling. wow-drilling is one factor that has kept me from considering...so this just clips and has postion holes to mount? general prx (if you don't mind me asking-think ~$1-1.2k?), shipping & mount time (seems maybe 5-10 minutes and can be done solo)? pulls the whole front-end together-real sharp.
Last edited by m52e55; 08-19-2007 at 12:23 PM.
#18
Administrator
Thread Starter
Dave,
no drilling. wow-drilling is one factor that has kept me from considering...so this just clips and has postion holes to mount? general prx (if you don't mind me asking-think ~$1-1.2k?), shipping & mount time (seems maybe 5-10 minutes and can be done solo)? pulls the whole front-end together-real sharp.
no drilling. wow-drilling is one factor that has kept me from considering...so this just clips and has postion holes to mount? general prx (if you don't mind me asking-think ~$1-1.2k?), shipping & mount time (seems maybe 5-10 minutes and can be done solo)? pulls the whole front-end together-real sharp.
I think I paid about ~$1,500.00 for the front and rear pieces (the rear was not Brabus). Brabus list the front lip for $1,500-$1,600. In retrospect, I'm not sure that the first lip they sent me was a genuine Brabus. It was heavier and did not have the same mounting points as this new one. Also, this one was shipped directly from Brabus.
The Brabus lip snaps over your lower bumper and is secured underneath at a couple of the same points that your bumper and lower air-dam meet.
#21
Super Member
Join Date: Apr 2006
Posts: 511
Received 0 Likes
on
0 Posts
'11/E63-Former car: '05 RT4 E55, Sprintbooster, Phenolic Spacers, RT IC /Secondary HE & BMC Filters
Todd,
I think I paid about ~$1,500.00 for the front and rear pieces (the rear was not Brabus). Brabus list the front lip for $1,500-$1,600. In retrospect, I'm not sure that the first lip they sent me was a genuine Brabus. It was heavier and did not have the same mounting points as this new one. Also, this one was shipped directly from Brabus.
The Brabus lip snaps over your lower bumper and is secured underneath at a couple of the same points that your bumper and lower air-dam meet.
I think I paid about ~$1,500.00 for the front and rear pieces (the rear was not Brabus). Brabus list the front lip for $1,500-$1,600. In retrospect, I'm not sure that the first lip they sent me was a genuine Brabus. It was heavier and did not have the same mounting points as this new one. Also, this one was shipped directly from Brabus.
The Brabus lip snaps over your lower bumper and is secured underneath at a couple of the same points that your bumper and lower air-dam meet.
#24
Administrator
Thread Starter