Blacked out E63 AMG
#27
Out Of Control!
We used Eisenmann mufflers,
We just ordered a Dynopac 4 wheel hub dyno, So I will post exact hp increases once that arrives...which realistically probably will not be for a few weeks, and we are planning a dyno day/weekend for any and every enthusiast soon after the dyno comes in, and obviously there will be *special* discounts for MBworlders!
We just ordered a Dynopac 4 wheel hub dyno, So I will post exact hp increases once that arrives...which realistically probably will not be for a few weeks, and we are planning a dyno day/weekend for any and every enthusiast soon after the dyno comes in, and obviously there will be *special* discounts for MBworlders!
Please keep me posted on this dyno day event. I'm guessing this event will be on a saturday? Hopefully?
Thanks
#28
Member
#33
Member
Thread Starter
Join Date: Aug 2007
Location: 3387 Livonia ave, LA, CA 90034
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes Benz E63 AMG
#34
MBWorld Fanatic!
Join Date: Mar 2005
Location: strip bar in Oregon
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
211 E55(sold) & 80cc shifter kart
your gonna get drone. no need to change stock mufflers on our cars.
#36
Member
Thread Starter
Join Date: Aug 2007
Location: 3387 Livonia ave, LA, CA 90034
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes Benz E63 AMG
Ya, he wanted it "as low as we could go".... So we did what he wanted (even after advising against it) and when he came to pick it up, He loved the look, but realized that it was not a functional daily driver that low, so we adjusted the settings to be a little bit higher on both the low and high settings
#38
Member
Thread Starter
Join Date: Aug 2007
Location: 3387 Livonia ave, LA, CA 90034
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes Benz E63 AMG
If you like this one, you'll love our SL55, go check it out here...
https://mbworld.org/forums/showthrea...61#post2562761
https://mbworld.org/forums/showthrea...61#post2562761
#39
Out Of Control!!
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
Wow, lots of work. Looks very nice. I love the chrome inserts being gone, like on an SL65.
To whomever was replacing their secondary cats with an X pipe (
WTF?), I'm a little confused. Why would you put an X pipe so high up and then have tubes and mufflers?![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
It seems to me that you would loose ALL top end and we are hurting for that as it is. At high revs, our SC becomes a limiting factor with how much air it can actually allow through. Any mod you do to the intake or exhaust could greatly exaggerate that tendency. To me, getting air throught the system efficiently is what a great tune is all about.
My choice would be to cut the resonators AND the secondary cats and replace with straight piping. Yes, this will drop some boost, but if your car is modded (which mine is headed) you will be adding back boost anyway. Having Xpsi of boost doesn't make it strong. I have seen systems that reduced pressure and yet were able to perform just as well due to high efficiency. Anyhow, sorry for the threadjack.
Great looking setup. Were the chrome inserts painted on the car or removed? Damn that must have been lots of work.
To whomever was replacing their secondary cats with an X pipe (
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
It seems to me that you would loose ALL top end and we are hurting for that as it is. At high revs, our SC becomes a limiting factor with how much air it can actually allow through. Any mod you do to the intake or exhaust could greatly exaggerate that tendency. To me, getting air throught the system efficiently is what a great tune is all about.
My choice would be to cut the resonators AND the secondary cats and replace with straight piping. Yes, this will drop some boost, but if your car is modded (which mine is headed) you will be adding back boost anyway. Having Xpsi of boost doesn't make it strong. I have seen systems that reduced pressure and yet were able to perform just as well due to high efficiency. Anyhow, sorry for the threadjack.
Great looking setup. Were the chrome inserts painted on the car or removed? Damn that must have been lots of work.
#41
MBWorld Fanatic!
Join Date: Feb 2006
Location: Kuwait City, Kuwait
Posts: 1,437
Likes: 0
Received 2 Likes
on
2 Posts
G55 & SLK55
I love what you guy's have done with it, I myself would just tint the orange markers and the white parts of the taillights to give it the SL55/65 similar taillight look or aka the Traditional AMG charcol/red taillight.
Thats a loud car
, If you wanted it to be even stealthier you should of went with Aftermarket headers,sport primary cats,xpipe and oem 2ndary cats and oem mufflers. At cruising it will sound normal but when you give it all its got then you unleash the beast and hear its deep and brutal roar.
Thats a loud car
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#42
MBWorld Fanatic!
That SL is pure sickness!!! great work
Are these all custom or are they ordered?
few questions AMG door pins
Full door sill carbon fiber with AMG
ESP off switch
Are these all custom or are they ordered?
few questions AMG door pins
Full door sill carbon fiber with AMG
ESP off switch
#43
Member
Thread Starter
Join Date: Aug 2007
Location: 3387 Livonia ave, LA, CA 90034
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes Benz E63 AMG
Most of the carbon is a kit ordered through RENNtech, but there are a few of our own custom carbon pieces...
The door pins are made in house out of solid billet
And the ESP off switch is stock, but the speak button is for the KENWOOD headunit's voice activation
Some of our vehicles are made to customer spec, the rest are given to us to do what we think looks good.
Jeff
#44
Super Member
Maybe I missed it in the post, but how did you black out the chrome trim? I want to do that on my wagon. Too much chrome.