MJ50's W211 Mod Fever (OEM Retrofits)
#926
MBWorld Fanatic!
Join Date: Nov 2001
Location: Jacksonville Florida
Posts: 3,858
Likes: 0
Received 3 Likes
on
3 Posts
209/W210 Estate /W211 modded by MBENZNL
maintenance update:
car at dealership due to crankshaft position sensor malfunction CEL
sensor was replaced 2 months ago...
dealer says the shop i went to get pulley installed 2yrs ago didn't have the right tools and bent the flywheel during the install...
my question is, can bent flywheel cause such CEL to come off?
symptom is prolonged engine start...
car at dealership due to crankshaft position sensor malfunction CEL
sensor was replaced 2 months ago...
dealer says the shop i went to get pulley installed 2yrs ago didn't have the right tools and bent the flywheel during the install...
my question is, can bent flywheel cause such CEL to come off?
symptom is prolonged engine start...
As the CPS reads the teeth on the flywheel...also CPS sensors are a known problem on the v6 v8s
A factory flywheel lock workshop tool is used to remove the harmonic balancer bolt as well as when torqued on install
A defective CPS will set a code and cause the cel to light
#927
Super Moderator
Thread Starter
Join Date: Jul 2003
Location: MBworld
Posts: 20,732
Received 715 Likes
on
696 Posts
bone stock E55 AMG
Since the pulley was replaced two years ago ..And if the flywheel was damaged from the install the hard start should have been since the install
As the CPS reads the teeth on the flywheel...also CPS sensors are a known problem on the v6 v8s
A factory flywheel lock workshop tool is used to remove the harmonic balancer bolt as well as when torqued on install
A defective CPS will set a code and cause the cel to light
As the CPS reads the teeth on the flywheel...also CPS sensors are a known problem on the v6 v8s
A factory flywheel lock workshop tool is used to remove the harmonic balancer bolt as well as when torqued on install
A defective CPS will set a code and cause the cel to light
#935
Super Moderator
Glad to see a fellow 211 AMG'er on the track!
I JUST got home from an event at buttonwillow today.
I actually like how the pic came out. Shows that they were used HARD
Gold turning calipers blow! Time to paint them a different color now?
I JUST got home from an event at buttonwillow today.
I actually like how the pic came out. Shows that they were used HARD
Gold turning calipers blow! Time to paint them a different color now?
#937
Super Moderator
MJ, you're too modest, you didn't mention (but you did show) your latest DIY mod... The coveted GOLD calipers
Glad I was there to witness it.
Glad I was there to witness it.
#943
MBWorld Fanatic!
Join Date: Oct 2007
Location: San Jose, CA
Posts: 1,717
Likes: 0
Received 17 Likes
on
11 Posts
2007 E63 w/P30 and Eurotech CF Diffuser
http://www.youtube.com/user/suunto61#p/u/7/bq-kmFuiirw
MJ50, real AMG drivers have Gold Calipers!!!! Mine were the same after Laguna Seca.
Last edited by Jon2007E63P30; 07-13-2011 at 01:33 AM.
#944
Super Moderator
Thread Starter
Join Date: Jul 2003
Location: MBworld
Posts: 20,732
Received 715 Likes
on
696 Posts
bone stock E55 AMG
Sure do. See me pass a GT3 on Laguna Seca. Start at about 7:45.
http://www.youtube.com/user/suunto61#p/u/7/bq-kmFuiirw
MY50, real AMG drivers have Gold Calipers!!!! Mine were the same after Laguna Seca.
http://www.youtube.com/user/suunto61#p/u/7/bq-kmFuiirw
MY50, real AMG drivers have Gold Calipers!!!! Mine were the same after Laguna Seca.
#945
Sure do. See me pass a GT3 on Laguna Seca. Start at about 7:45.
http://www.youtube.com/user/suunto61#p/u/7/bq-kmFuiirw
http://www.youtube.com/user/suunto61#p/u/7/bq-kmFuiirw
The following users liked this post:
Vick N (10-05-2019)