Benz Drag Race Showdown MIR 11/22/08 Discuss!
Sounds like quite a day
. Would have been great to REP us guys out here and show the (was/maybe to be) Supercharged CLS63 kick some AZZ
Within a day or two I will decide on what my Beast will get next for mods, one thing is for sure, it will be the FASTEST CLS63 to date without spray or motor swap. I will post new thread in a couple days. GREAT JOB ANDY (MHP) and to all that made it happen
Sounds like quite a day
. Would have been great to REP us guys out here and show the (was/maybe to be) Supercharged CLS63 kick some AZZ
Within a day or two I will decide on what my Beast will get next for mods, one thing is for sure, it will be the FASTEST CLS63 to date without spray or motor swap. I will post new thread in a couple days. GREAT JOB ANDY (MHP) and to all that made it happen 
It is so strange to see the pictures of the cars with ICE on the engines and the people wearing coats..........
AWESOME event Ahmad!!!!!!!!!!!! I hope you had a great time , it looks like you mopped up the other CLK's?

http://smg.photobucket.com/albums/v2...t=HPIM1807.flv
Posting this for ALi
"Juicee63 - I sent a message with a friend, wasn't too sure if you got that. I was checking if you and the Cali guys were still attending or not. Would of been great to meet everyone from out there, and hope to do so this spring in my Cali visit!.
That B.S. was Absolutely DROOOOOL. Bruce did a Great job with that and seeing the CF details done on it in person added justice to the Pix.
Chris - Cali trip maybe soon ?
ALi"
The Best of Mercedes & AMG

http://smg.photobucket.com/albums/v2...t=HPIM1807.flv

http://smg.photobucket.com/albums/v2...t=HPIM1807.flv
I must have been gone when this ran happened. That BS should have waited for you!!! Thought he was going to and then all of a sudden he was gone....and then it sounded like he let off WAY early?
hope you get your CCW's back w/ the right offset this time, that sucked.
Jim why didn't you wait for Ahmad? That looked like a race for the ages.
What was the times in the video? The guys seemed dissapointed becuase you failed to spray but it sure looked like a clean run (sounded good) The orange brake was so sik.
Posting this for ALi
"Juicee63 - I sent a message with a friend, wasn't too sure if you got that. I was checking if you and the Cali guys were still attending or not. Would of been great to meet everyone from out there, and hope to do so this spring in my Cali visit!.
That B.S. was Absolutely DROOOOOL. Bruce did a Great job with that and seeing the CF details done on it in person added justice to the Pix.
Chris - Cali trip maybe soon ?
ALi"
I would have flippin had so much fun getting waxed by the entire lineup, cept for the E500. You guys come on out , we can get our drank on
I must have been gone when this ran happened. That BS should have waited for you!!! Thought he was going to and then all of a sudden he was gone....and then it sounded like he let off WAY early?
hope you get your CCW's back w/ the right offset this time, that sucked.
Soon as I get the CCW's I'm gonna hit a test and tune and lay down some tens
Jim why didn't you wait for Ahmad? That looked like a race for the ages.
What was the times in the video? The guys seemed dissapointed becuase you failed to spray but it sure looked like a clean run (sounded good) The orange brake was so sik.
On that pass I ran 11.1 @ 124.5 They were disappointed because we had just put the bottle in the car for one last nitrous run. I wanted to spray against Jim. But he took off before I could stage. I am coming out the hole too soft so I'm not taking advantage of my higher stall torque converter. I cant ait to get tire on it and get back out there!!!
Soon as I get the CCW's I'm gonna hit a test and tune and lay down some tens
I'm not done with it yet but thanks.
On that pass I ran 11.1 @ 124.5 They were disappointed because we had just put the bottle in the car for one last nitrous run. I wanted to spray against Jim. But he took off before I could stage. I am coming out the hole too soft so I'm not taking advantage of my higher stall torque converter. I cant ait to get tire on it and get back out there!!!
So really Ahmad, on spray you likely had the fastest Benz there? Do you think you can beat the 10.58?
THE Springs are from H&R but custom worked by Evosport based on what i told Simon i wanted.
I cannot give enough credit to everybody that worked on the project. But I must commend myself on the cosmetics - that is my specialty.
Bruce quarterbacked the whole project start to finish and is responsible for the build - let me say that not only did he do a great job,but it has all held together very well - not one issue yet. He worked with me from start to finish
and worked with me on price as well.
I cannot say enough good things ab Bruce and his work.
Once again - Thanks to all that worked on the project - Especially Bruce Simon and Andy and Jim Tan from Car Nutz.
(anyone w pics i'd love to see some posted - i really dont have any)
Oh and Ahmed - wasn't mad at you in the least- its that lady at the gate that p'ed me off - she all but called me a liar ab payin in advance.
On that pass I ran 11.1 @ 124.5 They were disappointed because we had just put the bottle in the car for one last nitrous run. I wanted to spray against Jim. But he took off before I could stage. I am coming out the hole too soft so I'm not taking advantage of my higher stall torque converter. I cant ait to get tire on it and get back out there!!!
I'm not gonna sit here and make excuses, you have the fastest CLK, hand down and thanks again for puting on a great event.
I must have been gone when this ran happened. That BS should have waited for you!!! Thought he was going to and then all of a sudden he was gone....and then it sounded like he let off WAY early?
hope you get your CCW's back w/ the right offset this time, that sucked.
Also of note my 11.13 pass was with a 70 shot and my 100 octane ECU tune, I was preparred to run a 150 shot with a 120 octane NOS only ECU, I was having problems with bottle temp/pressure so I did not want to risk blowing something up. I left some on the table by shutting down and I left even more on the table with the biger shot and NOS ECU.
I am going to be raod racing in Texas in 2 weeks and then leaving my car at my house in Dallas for the winter. I am going to rent out the Hennesey drag strip in Texas in late January to take another stab at 10's
I'm not gonna sit here and make excuses, you have the fastest CLK, hand down and thanks again for puting on a great event.
I think the problem you are having is mixing bias ply tires in the rear with radial tires in the front. Your car will get squirrely on the top end when you mix tires. Either get some skinnies made for the front or switch over to mickey thompson et street radials in the rear. Just try it, I wouldn't give you bad advice.Yes they sprayed VHT all the way down. They even put a coat of resin down on the first 60'!
Thanks for admitting whose car is faster, takes alot to do that. You are welcome, and thanks for coming to the event. I know it was a long drive. Good luck in the future
Edit: just read your other post. Come on Jim, you just said you weren't gonna make excuses. You were slower than a car that was on pump gas, no nitrous, full interior (minus spare), on bald 18" bfg drag radials. I obviously had ALOT left on the table too. I know you did not let off on every pass. You AREN'T breaking the tires loose at the top end. Your car is swaying because you are MIXING bias play tires with radial tires. You THINK you are spinning them but you definitely are NOT
Last edited by blackbenzz; Nov 24, 2008 at 10:03 AM.
I think the problem you are having is mixing bias ply tires in the rear with radial tires in the front. Your car will get squirrely on the top end when you mix tires. Either get some skinnies made for the front or switch over to mickey thompson et street radials in the rear. Just try it, I wouldn't give you bad advice.Yes they sprayed VHT all the way down. They even put a coat of resin down on the first 60'!
Thanks for admitting whose car is faster, takes alot to do that. You are welcome, and thanks for coming to the event. I know it was a long drive. Good luck in the future
Again, sorry if I came off as unfriendly, I did come looking for you a few times on foot, I found your car but you were nowhere to be found.
Last edited by jrcart; Nov 24, 2008 at 10:12 AM.
Again, sorry if I came off as unfriendly, I did come looking for you a few times on foot, I found your car but you were nowhere to be found.
I think the problem you are having is mixing bias ply tires in the rear with radial tires in the front. Your car will get squirrely on the top end when you mix tires. Either get some skinnies made for the front or switch over to mickey thompson et street radials in the rear. Just try it, I wouldn't give you bad advice.Yes they sprayed VHT all the way down. They even put a coat of resin down on the first 60'!
Thanks for admitting whose car is faster, takes alot to do that. You are welcome, and thanks for coming to the event. I know it was a long drive. Good luck in the future
Edit: just read your other post. Come on Jim, you just said you weren't gonna make excuses. You were slower than a car that was on pump gas, no nitrous, full interior (minus spare), on bald 18" bfg drag radials. I obviously had ALOT left on the table too. I know you did not let off on every pass. You AREN'T breaking the tires loose at the top end. Your car is swaying because you are MIXING bias play tires with radial tires. You THINK you are spinning them but you definitely are NOT
I also respectfully disagree that he's not spinning at 1000ft+, if you watch the car run you can see it. Yes he wandered out of the groove but he was definitely spinning as well. I've made enough passes on 16-17" ET Streets/Drags with radials up front to know what you're talking about, but that was not the case here.
You, Jim, and I all agree that he needs 315/35/18" MT DRs to run N/A. Longer burnouts with the ETs plus a slight mod to his nitrous system will allow for him to run optimally on spray. I think you'll both run 10s very soon.










