E55 track results @ NRP 11.66
10-24-2008, 11:29 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2008
Location: avon, ohio
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
'05 E55, '06 300c SRT8
E55 track results @ NRP 11.66
Made some passes at a track rental at Norwalk Raceway on 10/13. Mods are shown in sig. This was a mid day pass with a 75 deg temperature. Once I got the launch down the car was amazingly consistent. I had an 11.68 pass video taped which I'll load on StreetFire later. Have you guys found that running a little mix of 100 octane gives you any gains?
10-25-2008, 01:56 AM
#2
MBWorld Fanatic!
awesome times, congrats! 121mph is moving.. slap some drag radials on the beast and i bet you can run 11.3s no problem!
10-26-2008, 11:27 PM
#6
Junior Member
Thread Starter
Join Date: Aug 2008
Location: avon, ohio
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
'05 E55, '06 300c SRT8
It's the standard pulley upgrade. I'm looking into the larger pulley but want to see if it can be run on pump gas first. The tune was done by Renntech after the install.
I'm also looking into either Nitto DR's or the Invos. I road race so I need some flexibility and I'm not sure the DR's will work well. I searched for some drag racing results with the Invos and couldn't find anything. I'd like to pull some low 1.7's or high 1.6's.
Todd
10-27-2008, 12:13 AM
#7
MBWorld Fanatic!
Join Date: Sep 2006
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
06 EuroElites E55
Thanks!
It's the standard pulley upgrade. I'm looking into the larger pulley but want to see if it can be run on pump gas first. The tune was done by Renntech after the install.
I'm also looking into either Nitto DR's or the Invos. I road race so I need some flexibility and I'm not sure the DR's will work well. I searched for some drag racing results with the Invos and couldn't find anything. I'd like to pull some low 1.7's or high 1.6's.
Todd
It's the standard pulley upgrade. I'm looking into the larger pulley but want to see if it can be run on pump gas first. The tune was done by Renntech after the install.
I'm also looking into either Nitto DR's or the Invos. I road race so I need some flexibility and I'm not sure the DR's will work well. I searched for some drag racing results with the Invos and couldn't find anything. I'd like to pull some low 1.7's or high 1.6's.
Todd
I forget the tire but a few guys run road tires as DRs. I am gonna guess and say they were toyos?
Trending Topics
11-07-2008, 02:42 PM
#8
MBWorld Fanatic!
Join Date: Mar 2002
Location: South Florida
Posts: 1,662
Likes: 0
Received 1 Like
on
1 Post
STS,FGT,12C,P85D,M4
nice car, looks familiar! 
here is the video....
http://www.dragtimes.com/Mercedes-Be...lip-16902.html
.
here is the video....
http://www.dragtimes.com/Mercedes-Be...lip-16902.html
.
11-07-2008, 03:07 PM
#9
Out Of Control!!
I'm also looking into either Nitto DR's or the Invos. I road race so I need some flexibility and I'm not sure the DR's will work well. I searched for some drag racing results with the Invos and couldn't find anything. I'd like to pull some low 1.7's or high 1.6's.
Todd
Todd
11-07-2008, 07:18 PM
#14
MBWorld Fanatic!
Join Date: Jul 2006
Location: Los Angeles, CA
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
2005 E55
Nice!
I went with 100/91 mix once for sh*ts and giggles. Butt dyno tells no difference except for a lighter pocket. I have no tune tho. Just ASP.
I went with 100/91 mix once for sh*ts and giggles. Butt dyno tells no difference except for a lighter pocket. I have no tune tho. Just ASP.
