SOUTHERNHOTROD

Hello all!

We have been hard at work on 722.6 transmissions. We have come up with some new innovations, and a better price!

If you are interested in a transmission, just PM me or give us a call!

Thanks!

P.S. We are also working on TCM calibrations!

prodigymb

details?

blackbenzz

New innovations and better price?

When is TCM tune gonna be available?

BlackOnBlackCLK

what kind of inovations? my southern hotrod trans is still going strong let me know about the tcm mods...

SOUTHERNHOTROD

We increase clutch capacity, machine clutch pistons, upgrade the freewheel clutches, and a lot more.
I will know more on the TCM's on Friday.

I have done more on the 2-3 and 3-4 shifts.

Great to hear that your transmission is doing its job!

blackbenzz

I still have problems with my 2-3 shift

SOUTHERNHOTROD

Give me a call and let me know what's going on.

blackbenzz

I will call you tomorrow. Sorry for the long vid but its the only one I could find where you could hear the problem. Listen to the 2-3 shift. This was the main reason I built the trans to begin with

http://s41.photobucket.com/albums/e2...urrent=082.flv

And any word on my axles?

E55Pilot

Sounds like you hit the rev limiter

blackbenzz

Thats exactly what happened... did you forget it is an auto? It was in drive. Maybe it isn't the trans but that was what I was told it was based on a previous video. Trans slipping in 2nd and hitting the limiter, I was told it was the K2 clutch to be exact. Even when it was opened up they told me my trans was in poor condition but I never got any pics. I thought it was the tune but my car has been retuned and it didnt go away. Next thing I'm going to do is check the MAF Voltage signal and maybe increase resistance if the Voltage is too high. It drives me crazy and I'm sure is costing me in the 1/4

E55Pilot

There is no MAF, it's speed density

blackbenzz

It is a CLK55. Trust me, it is not speed density. My car has a MAF, I am 100% sure of this. But thanks anyway

SOUTHERNHOTROD

The new transmission was in poor condition?

Zod

what exactly do you offer for 55k transmitions?
I have a cls55 06

blackbenzz

No, not at all. I'm talking about when I sent you my sotck trans and you had it opened up. I haven't touched it since.

Zod

what exactly do you offer for 55k transmition?
I have a cls55 06

SOUTHERNHOTROD

PM sent!

Marcus Frost

Sorry a little OT - but Ahmad you have one badass CLK. That thing looks and sounds disgusting - not to mention it's a borderline 10 second car. My hats off to you.

-m

Jakpro1

Interesting the 2nd to 3rd problems. I am finally trying out the MHP ECU and TCU and same thing Ahmad. Massive delay between 2nd and 3rd.

Andy says it will smooth out, we'll see.

Jim

Hammer Down

He got it to work huh?

blackbenzz

Thanks! That means alot coming from you
You too? It's a conspiracy! I wonder what is causing it

tuningtechnician

Don't hold your breath Jim about it "smoothing" out.

After about 250 miles I am sure you were told, right?

I wish you luck with it working out but lip service and it actually happening have been proven time and time again with MHP tunes.

Not bashing just being truthful about experiences with Andy.

tuningtechnician

+10000000

Hope to see 10's on March 1st Ahmad! Should be a great day.

BlackOnBlackCLK

I tried the MHP tune, when I put the ecu tcu in the car and went for a ride I thought my trans was blown because it shifted so slow and sloppy so we hooked up star and looked at shift times they were an unbelievable 2.5-3.1 seconds when they should be under .4 seconds. So I had it flashed back to stock and got my money back and now everything is fine.

MHP

Excuse me?

We tuned 2 cars that were in your "shop". JT55s CLK 63 BS which until recently held the N/A 63 record (just broken by another of our customers, jrcart) and Mario's M6 (quickest/fastest N/A M6 on dragtimes). Both customers LOVE their tuning.

Bruce, grow up. The customers and the numbers discredit and disprove anything that could possibly come out of your mouth.

Thanks