CM30, FD H/E Install Pics on mekantor's car. PICS
#1
Former Vendor of MBWorld
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 292 Likes
on
241 Posts
2003 W211 E55, 2003 W220 S600
CM30, FD H/E Install Pics on mekantor's car. PICS
Today I helped mekantor install a cm30, and FD heat exchanger on his. Install was pretty much straight forward.
here are this pics
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
here are this pics
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
By shardul, shot with Canon PowerShot S2 IS at 2009-08-22
#4
#6
Super Moderator
#7
Super Member
Its a beast again, thanks shardul! Some notes before I forget:
need to cut off some tabs from the bumper
need to remove a plastic frame from the bumper that holds some styrofoam
need to drill the FD heat exchanger to mount it
replace the hose clamps unless you want a coolant puddle
Somehow I now have 2 bulbs out, turn signal and side marker. Does anyone have a link to the clear turn signal bulbs, or their model number? I'm searching for them right now...
need to cut off some tabs from the bumper
need to remove a plastic frame from the bumper that holds some styrofoam
need to drill the FD heat exchanger to mount it
replace the hose clamps unless you want a coolant puddle
Somehow I now have 2 bulbs out, turn signal and side marker. Does anyone have a link to the clear turn signal bulbs, or their model number? I'm searching for them right now...
Trending Topics
#9
Former Vendor of MBWorld
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 292 Likes
on
241 Posts
2003 W211 E55, 2003 W220 S600
mike drive the car around a bit this week. lets bleed the system again next weekend and data log it. i took the same test drive route on my way back home and punched it a couple of times my IATs were in the 120. i think the system still has some air in it.
#10
Super Member
#12
Senior Member
Shardul, nice Work at some point i will have to do this!!
Now about a invite for a poor Aussie for the next work Day !! or even a Houston get together. I feel a boys night out coming up soon !!
Now about a invite for a poor Aussie for the next work Day !! or even a Houston get together. I feel a boys night out coming up soon !!
#13
Super Member
#19
Super Member
#20
Senior Member
#21
MBWorld Fanatic!
BTW, stop by the lobby area if you can. I'm throwing down a small happy hour party from 7-10. Wife is a chef, so bring an empty stomach.
Last edited by ///AMG4EVER; 08-24-2009 at 02:23 PM. Reason: sp ck
#23
Super Member
Join Date: Jul 2008
Location: Brooklyn, NY/Tampa, FL
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
2005 BLK/BLK E-Double Nickel.
#24
Super Member
#25
Super Member
Join Date: Jul 2008
Location: Brooklyn, NY/Tampa, FL
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
2005 BLK/BLK E-Double Nickel.
Oh okay... Also how difficult was it to drill the h/e to the bumper reinforcement? it looks something like 4 bolts on each side... planning on doing this along with my CM30 Install