Meth Inj
#28
Out Of Control!!
Any of the meth guys try making a pass without meth and then one with to see if it makes any difference on the track? I'm sure it does. Maybe next year I will play with that
The following users liked this post:
Chevota (04-10-2022)
#31
Tough pic to figure out but my guess is that he mounted it after the core. The fluid channels run horizontal, so this nozzle must be placed on the side of the intercooler in the photo, probably one on the other side of the intercooler too. Also, I would guess the light we see inside the intercooler is coming through the bypass hole.
#35
Super Member
This is a glimpse of the what I've been seeing. The car is still on a stock tune, this was the 3rd pull i made. All the pulls were within 5 min of each other, this pull is about 5mph to 120ish. What I find amazing is that the temp actually comes down from its peak during the pass.
![](http://i626.photobucket.com/albums/tt345/sneakyneon/Untitled.jpg?t=1259708465)
The following users liked this post:
Chevota (04-10-2022)
#36
Super Member
Here is what a 1/4 mile pass looks like with the rear mount tank PACKED with ice, I had iced down the SC as well for an our prior to this pass. you can tell in the photo but the pre run temp was 57 degrees. outside air temp was around 70.
![](http://i626.photobucket.com/albums/tt345/sneakyneon/Untitled-1.jpg?t=1259709368)
#37
Super Member
#39
Member
Thread Starter
Join Date: Nov 2009
Location: Central Jersey
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
several
Hello
I wish i understood what all of this means. I'll figure it out soon. Thanks guys for taking the time out to post pics .
Last edited by phantom1; 12-01-2009 at 11:30 PM.
#40
Thanks for sharing sneaky. I can't believe how much more timing you are getting. From 11 to 33*, is that accurate?
A couple of questions come to mind if you care to answer. First, did you figure out a way to pull fuel to compensate, or are you injecting mostly water/washer fluid? What size nozzle did you try?
-lowpro
A couple of questions come to mind if you care to answer. First, did you figure out a way to pull fuel to compensate, or are you injecting mostly water/washer fluid? What size nozzle did you try?
-lowpro
#41
MBWorld Fanatic!
Join Date: Jul 2008
Location: Philly
Posts: 2,171
Likes: 0
Received 3 Likes
on
3 Posts
997TT, R8 V10+, G550, Plaid S
This is a glimpse of the what I've been seeing. The car is still on a stock tune, this was the 3rd pull i made. All the pulls were within 5 min of each other, this pull is about 5mph to 120ish. What I find amazing is that the temp actually comes down from its peak during the pass. ![](http://i626.photobucket.com/albums/tt345/sneakyneon/Untitled.jpg?t=1259708465)
![](http://i626.photobucket.com/albums/tt345/sneakyneon/Untitled.jpg?t=1259708465)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
do you think with the nozzle mounted on one sided there is slightly uneven distribution between left and right banks?
on a 60 degree night from 0 to 130mph my IATs go to 125 with ICE packed in my 9gallon reservoir.
#42
MBWorld Fanatic!
Join Date: Apr 2009
Location: Lincoln, NE
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
2005 SL600, 2016 ES300h, 2012 Hayabusa
you can use a dual nozzle kit, it really doesn't add that much to the cost of the kit, and it isn't much harder to install it.
#43
Super Member
Thanks for sharing sneaky. I can't believe how much more timing you are getting. From 11 to 33*, is that accurate?
A couple of questions come to mind if you care to answer. First, did you figure out a way to pull fuel to compensate, or are you injecting mostly water/washer fluid? What size nozzle did you try?
-lowpro
A couple of questions come to mind if you care to answer. First, did you figure out a way to pull fuel to compensate, or are you injecting mostly water/washer fluid? What size nozzle did you try?
-lowpro
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
Last edited by sneakyneon; 12-02-2009 at 03:15 AM.
#44
Super Member
The last time i went to the track I went through 75 pounds of ice! I went back and forth on nozzle placement, The pump is a 250 psi and in such a tight area I'm hoping that its mixing ok? Theres not much room to mount another nozzle across from it cause of the map sensor. The very best set up I could think of was to mount 2 nozzle's in the top of the surge tank relocate the iat sensor to the one of the fronts of the tank, then you could machine that ridicules hump out of the Y and have the hole tig'ed. That was way way way over the top for me but the best way i could come up with.
#46
MBWorld Fanatic!
Join Date: Jul 2008
Location: Philly
Posts: 2,171
Likes: 0
Received 3 Likes
on
3 Posts
997TT, R8 V10+, G550, Plaid S
yeah that is what i was thinking of doing.....similarly to that C32 pic posted.
i think sneaky's logs def prove that as expected w/m does work on our car (just like all others)![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
keeping IATs under 80 on a full 1/4 mile run is amazing.
what does your car run sneaky?
i think sneaky's logs def prove that as expected w/m does work on our car (just like all others)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
keeping IATs under 80 on a full 1/4 mile run is amazing.
what does your car run sneaky?
#47
Super Member
I haven't raced the car with the meth yet since the tracks are closed for the next 3 months. but on my old set up it ran a best of 11.84@117 but that run was a fluke, The last time out it was running 12.00@119. basic mods at that time were a pulley headers, 3inch exh. with NO tune. this year it has a 82 TB pulley, headers no cats, 3in exh, phernolic spacers (top and bottom)some port work, water meth injection and fingers cross i can get my tune.
#48
MBWorld Fanatic!
Join Date: Apr 2009
Location: Lincoln, NE
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
2005 SL600, 2016 ES300h, 2012 Hayabusa
Don't most manufacturers say not to put it before your i/c? I thought that is what the instructions on my coolingmist varicool said.
#49
MBWorld Fanatic!
Join Date: Jul 2008
Location: Philly
Posts: 2,171
Likes: 0
Received 3 Likes
on
3 Posts
997TT, R8 V10+, G550, Plaid S
I think there is alot of potential with water meth,I choose my nozzle location because I really felt the IC is a pretty big restriction and struggles as it is then to had the difficulties of flowing meth and water through it.Like i said before I dont really know any more than anyone else so if you do it please post your results.
I haven't raced the car with the meth yet since the tracks are closed for the next 3 months. but on my old set up it ran a best of 11.84@117 but that run was a fluke, The last time out it was running 12.00@119. basic mods at that time were a pulley headers, 3inch exh. with NO tune. this year it has a 82 TB pulley, headers no cats, 3in exh, phernolic spacers (top and bottom)some port work, water meth injection and fingers cross i can get my tune.
I haven't raced the car with the meth yet since the tracks are closed for the next 3 months. but on my old set up it ran a best of 11.84@117 but that run was a fluke, The last time out it was running 12.00@119. basic mods at that time were a pulley headers, 3inch exh. with NO tune. this year it has a 82 TB pulley, headers no cats, 3in exh, phernolic spacers (top and bottom)some port work, water meth injection and fingers cross i can get my tune.
#50
MBWorld Fanatic!
If you are running any meth then I think after the core. The fluid ahead of the core is not a problem as it flashes to steam / vapour pretty quickly at that point in the air stream (its pretty hot ahead of the I/C). I would be more concerned of the corrosive effects of the meth on the I/C core than anything else. I don't plan to run any meth but water only so I think ahead of the core is ideal - I am looking at the install as a IAT coolant only and not to increase any fuel octane levels. Getting IAT lower will allow ECU to run more timing than otherwise, thats all I want.
I would be interested in your results running water only and water / meth...?!?!?
I would be interested in your results running water only and water / meth...?!?!?