Busta Riles

After deliberating over the past year, i finally decided to bite the bullet & get an ELM.

I'm thinking i got the deal of the century...a brand new/never installed Renntech V2 ELM for $850 shipped from EBay.

Now i'm excited for summer to come, & i've got 4 months of winter ahead of me.

PRAISE THE LOWERED!

Faast

I would call it a deal of the century if it came with the remote ?

bobgodd

get the lowering links for much less.

CharlyE500

Which part of Canada are you ? Vancouver or Toronto area ?

EURjus2slo

It snows less then 10 cm a year in Vancouver and if said hes gotta wait for 4 months of winter to be over id have to say hes talkin about Toronto

beauphus

i have the renntech ELM with the remote and you will LOVE it. works like a charm and very comfortable ride

CharlyE500

Maybe Montreal ?

novae500

i got the renntech ELM V3 installed last tuesday (12/01/09) by James ACG. This has the usb port to hook up to the laptop. Max drop is 4inches. But i set mine to 2.05F and 1.90R...still playing with the settings to get a one finger gap, but even front/rear.

One thing that i did notice is that at traffic lights it lowers itself? So when driving its raised, but not sure how much? Is this the norm?

Busta Riles

I live in Saskatchewan. There's really no point in installing it until March 2010, since we'll have major snow & -40 temps until then.

I don't have the remote with mine. I think i'll just get my wires extended by my tech & mount it in the console.

I am happy that i got my car starter installed last week. It's a definite bonus having a warm car to get into on days like today (minus 40 degrees)

Kenny55

I'm getting mine installed this coming up wed from James at acg- I spoke with the renntech representative and there's a setting via laptop for speed/height changes like the carlsson unit. you can make the car raise while in city driving speed and lower during highway speed and vise versa. I will play with the settings coming up wed and reprt more.

novae500

i finally got around to call james... the speed/height settings were set to 0 as default. So when i was at a dead stop, the ELM would lower the car at each stoplight. Changed the setting to 75 (to return back to stock height). Since then, it hasn't lowered when stopped at a light.

Just make sure James connects the power wire right :-) if not you'll get a Visit workshop. Luckily i caught him in time 3 hrs later after the install, before he flew to NYC